Confirm the exact configuration
Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.
Global industrial sourcing · Houston, Texas+1 417 261 6001 info@mropartsrfq.com
Reference imageConfirm configuration by manufacturer part number.
Festo
1569795
Servomotor EMMS-AS-55-MK-LS-RRB
The Festo 1569795 industrial component operates on a 360 V nominal DC voltage with a star-inside winding switch configuration, 4 pole pairs, a standstill torque of 0.97 Nm, and a nominal torque of 0.67 Nm. Built with an IP54 protection class, insulation class F, and a DIN 6885 A 3 x 3 x 14 featherkey shaft design, it features PTC resistor temperature monitoring, conforms to IEC 60034 standards, and meets EN 60034-1 S1 rating class requirements. Featuring CRC 2 moderate corrosion resistance, RoHS conformity, an electrical connector system plug, and compliance with EU-EMV and low voltage guidelines alongside RCM and c UL us authorizations, the unit functions within an ambient temperature range of -10 to 40 °C, storage temperatures of -20 to 60 °C, and 0 to 90% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
Request pricing and availabilityCommercial response for your destination and required quantity.
Request a Quote- Manufacturer
- Festo
- Part number
- 1569795
- Data verification
- Manufacturer evidence reviewed
For a faster response, include quantity, condition, and delivery destination.
Exact part-number verificationTechnical properties are matched to 1569795.
Worldwide sourcingSupport for planned and urgent industrial requirements.
Manufacturer documentationA document is added when the reviewed source provides one.
Verified configuration
Technical Specifications
- Ambient temperature
- -10 ... 40 °C
- Storage temperature
- -20 ... 60 °C
- Relative air humidity
- 0 - 90 %
- Conforms to standard
- IEC 60034
- Insulation protection class
- F
- Rating class according to EN 60034-1
- S1
- Temperature monitoring
- PTC resistor
- Protection class
- IP54
- Shaft design Featherkey
- DIN 6885 | A 3 x 3 x 14
- Electrical connector system
- Plug
- Materials note
- Conforms to RoHS
- Corrosion resistance classification CRC
- 2 - Moderate corrosion stress
- Authorization
- RCM Mark | c UL us - Recognized (OL)
- CE symbol (see declaration of conformity)
- according to EU-EMV guideline | according to EU low voltage guideline
- Nominal operating voltage DC
- 360 V
- Nominal voltage DC
- 360 V
- Type of winding switch
- Star inside
- Number of pole pairs
- 4
- Standstill torque
- 0.97 Nm
- Nominal torque
- 0.67 Nm
- Peak torque
- 2.7 Nm
- Nominal rotary speed
- 6,600 1/min
- Max. speed
- 7,330 1/min
- Nominal motor power
- 461 W
- Nominal motor current
- 1.19 A
- Peak current
- 5 A
- Motor constant
- 0.558 Nm/A
- Voltage constant, phase-to-phase
- 34.73 mVmin
- Phase-phase winding resistance
- 14.7 Ohm
- Phase-phase winding inductance
- 13.8 mH
- Overall mass moment of inertia at power take-off
- 0.24 kgcm2
- Product weight
- 1,620 g
- Permissible axial shaft load
- 75 N
- Permissible radial shaft load
- 150 N
- Rotor position sensor
- Resolver
- Rotary position encoder interface
- SIN/COS analogue signal
- Rotary position encoder measuring principle
- Inductive
- Brake holding torque
- 0.8 Nm
- Operating voltage DC for brake
- 24 V
- Power consumption, brake
- 10 W
- Mass moment of inertia of brake
- 0.02 kgcm2
- Switching cycles, holding brake
- 10 million idle actuations (without friction work)
- MTTF, subcomponent
- 80 years, rotary position encoder | 11416 years, holding brake
- MTTFd, subcomponent
- 160 years, rotary position encoder
Engineering context
Identification and RFQ Guidance
What to include in your RFQ
Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.
Technical verification
Our sourcing response is prepared against Festo 1569795. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.