Confirm the exact configuration
Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.
Global industrial sourcing · Houston, Texas+1 417 261 6001 info@mropartsrfq.com
Reference imageConfirm configuration by manufacturer part number.
Festo
1569824
Servomotor EMMS-AS-55-M-HS-TMB-S1
The Festo 1569824 industrial component operates on a nominal voltage of 565 V DC with a star inside winding switch configuration and four pole pairs, delivering a standstill torque of 0.99 Nm, a nominal torque of 0.68 Nm, and a peak torque of 3.8 Nm. Built with IP65 protection class and CRC 2 moderate corrosion stress resistance, it conforms to IEC 60034 standards, features insulation class F with PTC resistor temperature monitoring, and carries RCM Mark and c UL us recognized authorizations along with CE conformity to EU-EMV and low voltage guidelines. This RoHS-compliant unit functions within an ambient temperature range of -10 to 40 °C, a storage temperature range of -20 to 60 °C, and 0 to 90% relative air humidity while utilizing an S1 rating class according to EN 60034-1 and a plug electrical connector system. Submit the exact part number, quantity, and application requirements for a quote.
Request pricing and availabilityCommercial response for your destination and required quantity.
Request a Quote- Manufacturer
- Festo
- Part number
- 1569824
- Data verification
- Manufacturer evidence reviewed
For a faster response, include quantity, condition, and delivery destination.
Exact part-number verificationTechnical properties are matched to 1569824.
Worldwide sourcingSupport for planned and urgent industrial requirements.
Manufacturer documentationA document is added when the reviewed source provides one.
Verified configuration
Technical Specifications
- Ambient temperature
- -10 ... 40 °C
- Storage temperature
- -20 ... 60 °C
- Relative air humidity
- 0 - 90 %
- Conforms to standard
- IEC 60034
- Insulation protection class
- F
- Rating class according to EN 60034-1
- S1
- Temperature monitoring
- PTC resistor
- Protection class
- IP65
- Electrical connector system
- Plug
- Materials note
- Conforms to RoHS
- Corrosion resistance classification CRC
- 2 - Moderate corrosion stress
- Authorization
- RCM Mark | c UL us - Recognized (OL)
- CE symbol (see declaration of conformity)
- according to EU-EMV guideline | according to EU low voltage guideline
- Nominal operating voltage DC
- 565 V
- Nominal voltage DC
- 565 V
- Type of winding switch
- Star inside
- Number of pole pairs
- 4
- Standstill torque
- 0.99 Nm
- Nominal torque
- 0.68 Nm
- Peak torque
- 3.8 Nm
- Nominal rotary speed
- 6,600 1/min
- Max. speed
- 7,750 1/min
- Nominal motor power
- 470 W
- Nominal motor current
- 0.8 A
- Peak current
- 4.9 A
- Motor constant
- 0.829 Nm/A
- Voltage constant, phase-to-phase
- 51.54 mVmin
- Phase-phase winding resistance
- 31.3 Ohm
- Phase-phase winding inductance
- 29.3 mH
- Overall mass moment of inertia at power take-off
- 0.245 kgcm2
- Product weight
- 1,700 g
- Permissible axial shaft load
- 75 N
- Permissible radial shaft load
- 150 N
- Rotor position sensor
- Absolute multi-turn encoder
- Rotary position encoder interface
- EnDat 22
- Rotary position encoder measuring principle
- Inductive
- Rotor position encoder resolution
- 19 Bit
- Brake holding torque
- 0.8 Nm
- Operating voltage DC for brake
- 24 V
- Power consumption, brake
- 10 W
- Mass moment of inertia of brake
- 0.02 kgcm2
- Switching cycles, holding brake
- 10 million idle actuations (without friction work)
- MTTF, subcomponent
- 76 years, rotary position encoder | 11416 years, holding brake
- MTTFd, subcomponent
- 152 years, rotary position encoder
Engineering context
Identification and RFQ Guidance
What to include in your RFQ
Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.
Technical verification
Our sourcing response is prepared against Festo 1569824. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.