1801917

Name: Festo 1801917 Planar surface gantry EXCM-10-300-110-GF-ST-B-E1
Brand: Festo

Planar surface gantry EXCM-10-300-110-GF-ST-B-E1

The Festo 1801917 is a planar surface gantry featuring a size 10 designation with a 300 mm stroke in the X direction and a 110 mm stroke in the Y direction. Driven by a stepper motor with micro step 2000 step/U operation and linear interpolation, it delivers a maximum speed of 0.3 m/s, a maximum acceleration of 3 m/s2, and a repetition accuracy of ±0,1 mm. This industrial component incorporates an encoder position sensor, an integrated mains filter, a 7-segment display, a 15 Ohm braking resistance, and a controller operating mode utilizing a PWM-MOSFET power output stage with P position, PI speed, and electrical proportional-integral controllers. Comprehensive protective functions include I²t, temperature, current, voltage failure, drag error, and software end-position monitoring, with nominal current reduction and adjustment managed via software in a horizontal assembly position using set selection or direct position transfer modes. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

Request pricing and availabilityCommercial response for your destination and required quantity.

Request a Quote

Manufacturer: Festo
Part number: 1801917
Data verification: Manufacturer evidence reviewed

For a faster response, include quantity, condition, and delivery destination.

Exact part-number verificationTechnical properties are matched to 1801917.

Worldwide sourcingSupport for planned and urgent industrial requirements.

Manufacturer documentationA document is added when the reviewed source provides one.

Verified configuration

Technical Specifications

Size: 10
Stroke in X direction: 300 mm
Stroke in Y direction: 110 mm
Controller operating mode: PWM-MOSFET power output stage | Cascade controller with | P position controller | PI speed controller | Proportional and integral controller for electricity
Operating mode: Micro step, 2000 step/U
Adjustable current reduction: Using software
Assembly position: Horizontal
Position sensor: Encoder
Mains filter: Integrated
Protective function: I²t monitoring | Temperature monitoring | Current monitoring | Voltage failure detection | Drag error monitoring | Software end-position detection
Design structure: Planar surface gantry
Type of interpolation: Linear interpolation
Motor type: Stepper motor
Position mode: Set selection mode | Position directly transferred
Display: 7-segment
Nominal current adjustment: Using software
Max. acceleration: 3 m/s2
Max. speed: 0.3 m/s
Repetition accuracy: ±0,1 mm
Braking resistance: 15 Ohm
Digital logic output characteristics: Not electrically isolated
Duty cycle: 100%
Max. current, digital logic outputs: 100 mA
Max. intermediate circuit voltage, DC: 28 V
Nominal DC voltage, logic power supply: 24 V
Nominal voltage, load supply DC: 24 V
Nominal current, load supply: 6 A
Nominal current, logic supply: 0.3 A
Effective nominal current per phase: 1.4 A
Parameters configuring interface: Ethernet
Position control: Yes
Ethernet, supported protocols: TCP/IP

Engineering context

Identification and RFQ Guidance

Confirm the exact configuration

Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.

What to include in your RFQ

Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.

Technical verification

Our sourcing response is prepared against Festo 1801917. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.