Confirm the exact configuration
Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.
Global industrial sourcing · Houston, Texas+1 417 261 6001 info@mropartsrfq.com
MROProduct image under verification
Reference imageConfirm configuration by manufacturer part number.
Festo
534278
Swivel/gripper unit HGDS-PP-12-P-A
The Festo 534278 is a double-acting industrial component featuring two gripper fingers with a 2.5 mm stroke per jaw, a 210-degree swivel angle, and a rotation angle adjustment range of 0 to 210 degrees. Operating at a working pressure of 3 to 8 bar, this 465 g unit delivers a closing force of 52 N and an opening force of 58 N at 6 bar, with static torques up to 1.5 Nm and a fine adjustment of the swivel drive of -6 degrees. Lubricated operation is possible and subsequently required for further operation. Submit the exact part number, quantity, and application requirements for a formal quote.
Request pricing and availabilityCommercial response for your destination and required quantity.
Request a Quote- Manufacturer
- Festo
- Part number
- 534278
- Data verification
- Manufacturer evidence reviewed
For a faster response, include quantity, condition, and delivery destination.
Exact part-number verificationTechnical properties are matched to 534278.
Worldwide sourcingSupport for planned and urgent industrial requirements.
Manufacturer documentationA document is added when the reviewed source provides one.
Verified configuration
Technical Specifications
- Max. force on gripper jaw Fz static
- 20 N
- Mode of operation
- double-acting
- Total force at 6 bar, closing
- 52 N
- Total force at 6 bar, opening
- 58 N
- Fine adjustment of swivel drive
- -6 deg
- Max. angular gripper jaw backlash ax,ay
- 0 deg
- Max. gripper jaw backlash Sz
- 0 mm
- Min. closing time at 6 bar
- 30 ms
- Min. opening time at 6 bar
- 20 ms
- Max. torque at gripper Mz static
- 1.5 Nm
- Max. torque at gripper Mx static
- 1.5 Nm
- Note on operating and pilot medium
- Lubricated operation possible (subsequently required for further | operation)
- Stroke per gripper jaw
- 2.5 mm
- Max. swivel frequency at 6 bar
- 2 Hz
- Torque at 6 bar
- 0.85 Nm
- Product weight
- 465 g
- Working pressure
- 3 ... 8 bar
- Swivel angle
- 210 deg
- Rotation angle adjustment range
- 0 ... 210 deg
- Number of gripper fingers
- 2
- Ambient temperature
- 5 ... 60 °C
- Max. torque at gripper My static
- 1.5 Nm
- Gripping force per gripper jaw at 6 bar, closing
- 26 N
- Gripping force per gripper jaw at 6 bar, opening
- 29 N
- Gripper function
- Parallel
- Corrosion resistance classification CRC
- 2
- Materials information for drive shaft
- Steel
- Assembly position
- Any
- Position detection, swivel actuator
- with proximity sensor
- Position detection, gripper
- with proximity sensor
- Materials information for cover
- POM
- Materials information, housing
- Wrought Aluminum alloy
- Materials note
- Contains PWIS substances
- Mounting type
- With dovetail slot | Optional
- Materials information for gripper jaws
- Wrought Aluminum alloy
- Materials information for seals
- NBR
- Cushioning of swivel actuator
- P: Flexible cushioning rings/plates at both ends
- Size
- 12
- Operating medium
- Compressed air in accordance with ISO8573-1:2010 [7:4:4]
- Design structure
- With parallel gripper and gripper actuator
- Pneumatic connection
- M5
Engineering context
Identification and RFQ Guidance
What to include in your RFQ
Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.
Technical verification
Our sourcing response is prepared against Festo 534278. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.