Confirm the exact configuration
Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.
Global industrial sourcing · Houston, Texas+1 417 261 6001 info@mropartsrfq.com
MROProduct image under verification
Reference imageConfirm configuration by manufacturer part number.
Festo
539054
Parallel gripper HGPPI-12-10-PB
The Festo part number 539054 is an industrial component featuring a size 12 parallel gripper function with two fingers, a double-acting mode of operation, and a working pressure of 5 to 6 bar. This twin-piston design incorporates a ball bearing cage guide, built-in directly actuated poppet valves, integrated sequence control, an integrated displacement encoder, built-in pressure sensors, and integrated regulation governed by a PID position controller with subordinate, non-linear pressure and force regulation. Operational control is facilitated by a DIL switch for setting operating modes and diagnostic scope alongside green LED ready status displays, red LED bus error displays, and red LED error status indicators compatible with Hall sensors via a device database configuration file support. The unit offers any assembly position with a smallest positioning stroke of 0.2 mm, a maximum replacement accuracy of <= 0.2 mm, zero maximum angular gripper jaw backlash ax and ay, zero maximum gripper jaw backlash Sz, and a controllable stroke range per gripper jaw of 0 to 10 mm. Submit the exact part number, quantity, and application requirements for a quote.
Request pricing and availabilityCommercial response for your destination and required quantity.
Request a Quote- Manufacturer
- Festo
- Part number
- 539054
- Data verification
- Manufacturer evidence reviewed
For a faster response, include quantity, condition, and delivery destination.
Exact part-number verificationTechnical properties are matched to 539054.
Worldwide sourcingSupport for planned and urgent industrial requirements.
Manufacturer documentationA document is added when the reviewed source provides one.
Verified configuration
Technical Specifications
- Size
- 12
- Smallest positioning stroke
- 0,2 mm
- Max. replacement accuracy
- <= 0.2 mm
- Max. angular gripper jaw backlash ax,ay
- 0 deg
- Max. gripper jaw backlash Sz
- 0 mm
- Controllable stroke range per gripper jaw
- 0 ... 10 mm
- Number of gripper fingers
- 2
- Assembly position
- Any
- Controller operating mode
- PID position controller with subordinate, non-linear pressure/force | regulation
- Mode of operation
- double-acting
- Gripper function
- Parallel
- Design structure
- twin piston | Guide | With built-in, directly actuated poppet valves | With integrated sequence control | With integrated displacement encoder | With built-in pressure sensors | With integrated regulation
- Guide
- Ball bearing cage guide
- Position detection
- For Hall sensors
- Configuration support
- Device database file
- Control elements
- DIL switch for setting the operating modes and diagnostic scope
- Ready status display
- Green LED
- Bus error display
- Red LED
- Error status
- Red LED
- Working pressure
- 5 ... 6 bar
- Min. positioning speed
- 1 mm/s
- Typical positioning time
- 150 ... 250 ms
- Repetition accuracy
- +/-0,1 mm
- Bus terminating resistor
- 120 Ohm, external
- Duty cycle
- 100%
- Max. current consumption, load
- 0.07 A
- Max. current consumption, logic
- 0.2 A
- Nominal DC voltage, logic power supply
- 24 V
- Nominal voltage, load supply DC
- 24 V
- Residual ripple
- 5 %
- Permissible range, load supply
- ± 10 %
- Permissible range, logic voltage
- ± 10 %
- Operating medium
- Dried compressed air, lubricated or unlubricated
- CE symbol (see declaration of conformity)
- according to EU-EMV guideline
- Corrosion resistance classification CRC
- 2
- Relative air humidity
- 0 - 95 % | non-condensing
Engineering context
Identification and RFQ Guidance
What to include in your RFQ
Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.
Technical verification
Our sourcing response is prepared against Festo 539054. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.