553218

Name: Festo 553218 Quarter turn actuator DAPS-0240-090-RS3-F1012-T6
Brand: Festo

Quarter turn actuator DAPS-0240-090-RS3-F1012-T6

The Festo 553218 is a single-acting industrial component featuring a kinematic yoke system with a 0240 actuator size and a 90-degree swivel angle. Operating within a pressure range of 0.42 MPa to 0.84 MPa (4.2 bar to 8.4 bar) and a spring force connection pressure of 0.42 MPa (4.2 bar), this unit includes an F10 or F12 flange hole pattern and conforms to ISO 5211 and VDI/VDE 3845 (NAMUR) valve standards. It provides safety integrity level (SIL) up to SIL 2 low demand mode, closes to the right without cushioning or position sensing, and features an adjustable end-position range of -1 degree to 9 degrees at 0 degrees and 81 degrees to 91 degrees at the nominal swivel angle. Submit the exact part number, quantity, and application requirements to request a quote.

Request pricing and availabilityCommercial response within one business day for your destination and required quantity.

Request a Quote

Why no listed price?

Industrial and obsolete parts are priced per enquiry: the final price depends on available stock, condition, quantity, and your delivery destination, so a fixed list price would be misleading. Request a quote and we confirm current pricing, lead time, and sourcing options — including hard-to-find and discontinued Festo references — within one business day.

Manufacturer: Festo
Part number: 553218
Data verification: Manufacturer evidence reviewed

For a faster response, include quantity, condition, and delivery destination.

Exact part-number verificationTechnical properties are matched to 553218.

Worldwide sourcingSupport for planned and urgent industrial requirements.

Manufacturer documentationA document is added when the reviewed source provides one.

Verified configuration

Technical Specifications

Size of valve actuator: 0240
Flange hole pattern: F10 | F12
Swivel angle: 90 deg
End-position adjusting range at 0°: -1 deg...9 deg
End-position adjusting range at nominal swivel angle: 81 deg...91 deg
Depth shaft connection: 29.5 mm
Information on the end-position adjusting range: One end position optionally adjustable
Standard connection for valve: ISO 5211
Cushioning: No cushioning
Mounting position: Any
Mode of operation: Single-acting
Structural design: Kinematic yoke system
Position sensing: None
Closing direction: Closes to the right
Valve connection conforms to standard: VDI/VDE 3845 (NAMUR)
Safety integrity level (SIL): Up to SIL 2 low demand mode
Connection pressure for spring force: 0.42 MPa | 4.2 bar
Operating pressure: 0.42 MPa...0.84 MPa | 4.2 bar...8.4 bar
Nominal operating pressure: 0.56 MPa | 5.6 bar
Max. swivel frequency at 6 bar: 1 Hz
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
UKCA marking (see declaration of conformity): acc. to UK EX instructions
Explosion prevention and protection: Zone 1 (ATEX) | Zone 2 (ATEX) | Zone 21 (ATEX) | Zone 22 (ATEX)
Certicate issuing authority: German Technical Control Board North (TÜV Nord) 212170801
ATEX category gas: II 2G
ATEX category for dust: II 2D

Engineering context

Identification and RFQ Guidance

Confirm the exact configuration

Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.

What to include in your RFQ

Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.

Technical verification

Our sourcing response is prepared against Festo 553218. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.