557558

Name: Festo 557558 Semi-rotary actuator DFPB-40-090-S4-F05
Brand: Festo

Semi-rotary actuator DFPB-40-090-S4-F05

The Festo 557558 is a single-acting rack and pinion industrial component featuring an actuator size of 40, an F05 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit is designed for any assembly position using compressed air in accordance with ISO 8573-1:2010 [7:4:4]. It includes a NAMUR valve connection based on VDI/VDE 3845, achieves Safety Integrity Level up to SIL 3 in Low Demand mode, and carries ATEX certifications for explosive atmospheres with an ambient temperature range of -20°C to 80°C. Submit the exact part number, quantity, and application requirements for a formal quote.

Request pricing and availabilityCommercial response for your destination and required quantity.

Request a Quote

Manufacturer: Festo
Part number: 557558
Data verification: Manufacturer evidence reviewed

For a faster response, include quantity, condition, and delivery destination.

Exact part-number verificationTechnical properties are matched to 557558.

Worldwide sourcingSupport for planned and urgent industrial requirements.

Manufacturer documentationA document is added when the reviewed source provides one.

Verified configuration

Technical Specifications

Size of actuator: 40
Flange hole pattern: F05
Swivel angle: 90 deg
Cushioning: No cushioning
Assembly position: Any
Mode of operation: single-acting
Design structure: Rack and pinion
Position detection: No
Valve connection conforms to standard: Based on VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL): bis SIL 3 Low Demand mode
Working pressure: <= 8 bar
Nominal working pressure: 5.6 bar
ATEX category Gas: II 2G
Explosion ignition protection type Gas: c T4 X
ATEX category Dust: II 2D
Explosion ignition protection type Dust: c 125°C X
Explosion-proof ambient temperature: -20°C <= Ta <= +80°C
Ambient temperature: -20 ... 80 °C
Operating medium: Compressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (subsequently required for further | operation)
CE symbol (see declaration of conformity): according to EU-Ex protection guideline (ATEX)
Corrosion resistance classification CRC: 3
Note about the torque: Das Betriebsdrehmoment des Antriebs darf nicht höher sein als das in | der ISO 5211 aufgeführte maximal zulässige Drehmoment, bezogen auf | die Größe des Befestigungsflansches und der Kupplung.
PFD (Probability of Failure on Demand): 4.95E-06
Pneumatic connection: Subbase | G1/8
Materials note: Conforms to RoHS
Materials information for drive shaft: Wrought Aluminum alloy | Anodized
Materials information for cover: Aluminum die cast | coated
Materials information for seals: NBR
Materials information, housing: Wrought Aluminum alloy | Anodized
Materials information for nut: Wrought Aluminum alloy | Anodized
Screw material data: High alloy steel, non-corrosive

Engineering context

Identification and RFQ Guidance

Confirm the exact configuration

Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.

What to include in your RFQ

Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.

Technical verification

Our sourcing response is prepared against Festo 557558. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.