Confirm the exact configuration
Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.
Global industrial sourcing · Houston, Texas+1 417 261 6001 info@mropartsrfq.com
MROProduct image under verification
Reference imageConfirm configuration by manufacturer part number.
Festo
557613
Semi-rotary actuator DFPB-550-090-F1012
The Festo part number 557613 is a double-acting industrial component featuring a rack and pinion design structure, a size 550 actuator, an F1012 flange hole pattern, and a 90-degree swivel angle without cushioning. Designed with a NAMUR valve connection based on VDI/VDE 3845 and no position detection, it operates within a working pressure range of 1 to 8 bar at a nominal working pressure of 5.6 bar using compressed air conforming to ISO8573-1:2010 [7:4:4]. Certified for hazardous areas with ATEX category II 2G gas and II 2D dust ratings, it supports safety integrity levels up to SIL 3 in Low Demand mode and functions within an ambient temperature range of -20°C to 80°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
Request pricing and availabilityCommercial response for your destination and required quantity.
Request a Quote- Manufacturer
- Festo
- Part number
- 557613
- Data verification
- Manufacturer evidence reviewed
For a faster response, include quantity, condition, and delivery destination.
Exact part-number verificationTechnical properties are matched to 557613.
Worldwide sourcingSupport for planned and urgent industrial requirements.
Manufacturer documentationA document is added when the reviewed source provides one.
Verified configuration
Technical Specifications
- Size of actuator
- 550
- Flange hole pattern
- F1012
- Swivel angle
- 90 deg
- Cushioning
- No cushioning
- Assembly position
- Any
- Mode of operation
- double-acting
- Design structure
- Rack and pinion
- Position detection
- No
- Valve connection conforms to standard
- Based on VDI/VDE 3845 (NAMUR)
- Safety Integrity Level (SIL)
- bis SIL 3 Low Demand mode
- Working pressure
- 1 ... 8 bar
- Nominal working pressure
- 5.6 bar
- ATEX category Gas
- II 2G
- Explosion ignition protection type Gas
- c T4 X
- ATEX category Dust
- II 2D
- Explosion ignition protection type Dust
- c 125°C X
- Explosion-proof ambient temperature
- -20°C <= Ta <= +80°C
- Ambient temperature
- -20 ... 80 °C
- Operating medium
- Compressed air in accordance with ISO8573-1:2010 [7:4:4]
- Note on operating and pilot medium
- Lubricated operation possible (subsequently required for further | operation)
- CE symbol (see declaration of conformity)
- according to EU-Ex protection guideline (ATEX)
- Corrosion resistance classification CRC
- 3
- Torque at rated working pressure and 0° rotation angle
- 502 Nm
- Note about the torque
- Das Betriebsdrehmoment des Antriebs darf nicht höher sein als das in | der ISO 5211 aufgeführte maximal zulässige Drehmoment, bezogen auf | die Größe des Befestigungsflansches und der Kupplung.
- PFD (Probability of Failure on Demand)
- 4.95E-06
- Product weight
- 18,600 g
- Pneumatic connection
- G1/8
- Materials note
- Conforms to RoHS
- Materials information for drive shaft
- Wrought Aluminum alloy | Anodized
- Materials information for cover
- Aluminum die cast | coated
- Materials information for seals
- NBR
- Materials information, housing
- Wrought Aluminum alloy | Anodized
- Materials information for nut
- Wrought Aluminum alloy | Anodized
- Screw material data
- High alloy steel, non-corrosive
Engineering context
Identification and RFQ Guidance
What to include in your RFQ
Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.
Technical verification
Our sourcing response is prepared against Festo 557613. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.