557616

Name: Festo 557616 Semi-rotary actuator DFPB-1050-090-F14
Brand: Festo

Semi-rotary actuator DFPB-1050-090-F14

The Festo 557616 is a double-acting rack and pinion industrial component featuring a size 1050 actuator with an F14 flange hole pattern and a 90-degree swivel angle. Operating within a working pressure range of 1 to 8 bar at a nominal pressure of 5.6 bar, this unit utilizes compressed air per ISO 8573-1:2010 [7:4:4] and permits lubricated operation. Certified for hazardous locations up to ATEX category II 2G for gas and II 2D for dust with SIL 3 Low Demand mode capabilities, it is designed without cushioning or position detection and mounts in any assembly position. Submit the exact part number, quantity, and application requirements to request a formal quote.

Request pricing and availabilityCommercial response for your destination and required quantity.

Request a Quote

Manufacturer: Festo
Part number: 557616
Data verification: Manufacturer evidence reviewed

For a faster response, include quantity, condition, and delivery destination.

Exact part-number verificationTechnical properties are matched to 557616.

Worldwide sourcingSupport for planned and urgent industrial requirements.

Manufacturer documentationA document is added when the reviewed source provides one.

Verified configuration

Technical Specifications

Size of actuator: 1050
Flange hole pattern: F14
Swivel angle: 90 deg
Cushioning: No cushioning
Assembly position: Any
Mode of operation: double-acting
Design structure: Rack and pinion
Position detection: No
Valve connection conforms to standard: Based on VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL): bis SIL 3 Low Demand mode
Working pressure: 1 ... 8 bar
Nominal working pressure: 5.6 bar
ATEX category Gas: II 2G
Explosion ignition protection type Gas: c T4 X
ATEX category Dust: II 2D
Explosion ignition protection type Dust: c 125°C X
Explosion-proof ambient temperature: -20°C <= Ta <= +80°C
Ambient temperature: -20 ... 80 °C
Operating medium: Compressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (subsequently required for further | operation)
CE symbol (see declaration of conformity): according to EU-Ex protection guideline (ATEX)
Corrosion resistance classification CRC: 3
Torque at rated working pressure and 0° rotation angle: 945 Nm
Note about the torque: Das Betriebsdrehmoment des Antriebs darf nicht höher sein als das in | der ISO 5211 aufgeführte maximal zulässige Drehmoment, bezogen auf | die Größe des Befestigungsflansches und der Kupplung.
PFD (Probability of Failure on Demand): 4.95E-06
Product weight: 32,200 g
Pneumatic connection: G1/4
Materials note: Conforms to RoHS
Materials information for drive shaft: Wrought Aluminum alloy | Anodized
Materials information for cover: Aluminum die cast | coated
Materials information for seals: NBR
Materials information, housing: Wrought Aluminum alloy | Anodized
Materials information for nut: Wrought Aluminum alloy | Anodized
Screw material data: High alloy steel, non-corrosive

Engineering context

Identification and RFQ Guidance

Confirm the exact configuration

Use the manufacturer part number and model code—not appearance alone. Connection, size, material, voltage, pressure, seal, and control options can differ within the same product family.

What to include in your RFQ

Provide quantity, delivery country and ZIP/postal code, required condition, target date, and photographs of the existing nameplate when available.

Technical verification

Our sourcing response is prepared against Festo 557616. Final compatibility remains subject to the machine manufacturer’s requirements and complete application data.