Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
547476
Pressure sensor SDET-22T-B2-G14-U-M12
The Festo 547476 is a piezoresistive pressure sensor engineered to measure relative pressure across a range of -1 to 1 bar with an accuracy of 1.5% FS and a 5 bar overload range. This component operates on a 14 to 30 V DC voltage range, featuring short circuit strength, polarity protection for operating voltage, and a 3-wire 0.1 to 10 V analog output via a 4-pin M12x1 plug conforming to EN 60947-5-2 with a PBT plug housing. Constructed free of copper and PTFE, it accommodates liquid media, gaseous media, and compressed air at medium temperatures from -10 to 100 °C and ambient temperatures from 0 to 80 °C. Certified with C-Tick and c UL us - Listed (OL) authorizations and bearing the CE symbol according to the EU-EMV guideline, this industrial component is available for procurement. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547475
Pressure sensor SDET-22T-B2-G14-I-M12
The Festo 547475 is a piezoresistive pressure sensor engineered to measure relative pressure across a range of -1 to 1 bar with a 5 bar overload capacity and 1.5% full-scale accuracy. Designed for gaseous media, liquid media, and compressed air, this component operates within a medium temperature of -10 to 100 °C and an ambient temperature of 0 to 80 °C. It features an 8 to 30 VDC operating voltage range, a 4-20 mA two-wire analog output, and an M12x1 4-pin round plug electrical connection housed in PBT with polarity protection and short circuit strength. The unit is copper- and PTFE-free, bearing the CE symbol according to the EU-EMV guideline alongside C-Tick and c UL us - Listed (OL) authorizations. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →Festo
547454
Motor controller CMMS-ST-C8-7
The Festo 547454 industrial component operates via a PWM-MOSFET power output stage with a micro step mode exceeding 4000 steps per revolution and a maximum step frequency of 4 kHz. This unit integrates an encoder for position and rotor position sensing, a seven-segment display, DIP switch control elements, and an integrated mains filter and bus terminating resistor. System safety is maintained through I²t monitoring, temperature monitoring, current monitoring, voltage failure detection, and drag error monitoring, alongside a 17-ohm braking resistance with 0.5 kVA pulse power and a max intermediate circuit DC voltage of 48 V. Nominal current adjustment, current reduction, and step adjustment are configured via software, complemented by non-isolated digital logic outputs that support a maximum current of 100 mA and feature a set point input impedance of 20 kOhm. Submit the exact part number, quantity, and application requirements for an RFQ.
View product details →Festo
547449
Connecting cable KMYZ-9-24-AD-0,2-B
The Festo part number 547449 is a 18 g industrial component featuring a 2-pin angled socket and plug electrical connection with a 0.2 m cable length, 3.4 mm cable diameter, and 2x0,25 cable structure. Constructed with a PA housing, TPE-U(PUR) cable sheaths, and bronze crimp connectors, this RoHS-compliant assembly operates within an ambient temperature range of -10 to 50 °C and provides IP65 protection. It mounts onto a solenoid valve using an M2 central screw requiring a 0.25 Nm tightening torque, supports any assembly position, and carries a CE symbol according to the EU-EMV guideline without a protective earth connection. Submit the exact part number, quantity, and application requirements for a quote.
View product details →Festo
547951
Foot mounting HNCE-63-AX
The Festo 547951 is an industrial component with a product weight of 470 g and an assembly position of any. It operates within an ambient temperature range of -10 to 60 °C, supports a relative air humidity of 0 to 95 %, and permits storage temperatures between -25 and 60 °C while conforming to RoHS materials standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →Festo
547950
Foot mounting HNCE-40-AX
The Festo 547950 is an industrial component with a product weight of 220 g and supports any assembly position. It operates within an ambient temperature range of -10 to 60 °C, a storage temperature range of -25 to 60 °C, and relative air humidity levels from 0 to 95 %, with materials conforming to RoHS. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →Festo
547949
Foot mounting HNCE-32-AX
This Festo industrial component, part number 547949, features an assembly position of any and a product weight of 160 g with materials that conform to RoHS. It operates within an ambient temperature range of -10 to 60 °C, supports storage temperatures from -25 to 60 °C, and tolerates relative air humidity between 0 and 95 %. Submit the exact part number, quantity, and application requirements for a quote.
View product details →Festo
547050
Socket head screw M4X65-8.8-VS-100
The Festo socket head screw M4X65-8.8-VS-100 (Part Number: 547050) is an industrial component featuring a galvanized steel screw material and a corrosion resistance class (CRC) of 1 for low corrosion stress environments. This RoHS compliant part adheres to LABS conformity standard VDMA24364-B1/B2-L. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547049
Socket head screw M3X45-8.8-VS-100
The Festo 547049 socket head screw M3X45-8.8-VS-100 is an industrial component manufactured with galvanized steel screws featuring a corrosion resistance class (CRC) of 1 for low corrosion stress environments. This RoHS-compliant part conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →Festo
547048
Socket head screw M3X40-8.8-VS-100
The Festo socket head screw M3X40-8.8-VS-100, designated as part number 547048, is manufactured with galvanized steel screws featuring a CRC 1 rating for low corrosion stress. This RoHS-compliant industrial component maintains LABS conformity to VDMA24364-B1/B2-L standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547029
Solenoid valve VSNB-F-B52-H-G14-1A1
The Festo 547029 is an electrical 5/2 bistable industrial component featuring a piston slide design structure and a 44.5 mm width. Engineered with a soft sealing principle and freedom from overlap, this piloted valve achieves a standard nominal flow rate of 950 l/min across a working and pilot pressure range of 2.5 to 8 bar. Operating on a 24 V DC, 2.1 W characteristic coil with IP65 protection class, it includes a 100% duty cycle, throttleable exhaust-air function, and VDI/VDE 3845 NAMUR standard conformance. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →Festo
547028
Solenoid valve VSNB-F-M52-MH-G14-1A1
The Festo 547028 is a 44.5 mm wide electrical industrial component featuring a 5/2 monostable valve function, piston slide design, and soft sealing principle with a nominal size of 8 mm. Operating at a working and pilot pressure range of 2.5 to 8 bar, this piloted unit delivers a standard nominal flow rate of 950 l/min alongside a mechanical spring reset, throttleable exhaust-air function, and non-reversible flow direction with freedom from overlap. Conforming to the VDI/VDE 3845 NAMUR standard with an IP65 protection class, the device includes detenting and pushing manual overrides, any assembly position, a 30 ms switch-on time, and a 100 ms switch-off time. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →Festo
547025
Control plate VAOP-C2-P2
The Festo 547025 is an industrial component featuring a wrought aluminum alloy housing and a product weight of 21 g. Both the medium temperature and ambient temperature operating ranges span from -10 to 60 °C. This part contains PWIS substances and conforms to RoHS regulations. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547024
Solenoid valve VSNB-F-B52-G14-1A1-EX4A
The Festo 547024 is an electrical 5/2 bistable industrial component featuring a piston slide design structure with a soft sealing principle and a 44.5 mm width. This piloted valve conforms to the VDI/VDE 3845 NAMUR standard and offers a 950 l/min standard nominal flow rate, an 8 mm nominal size, and a working pressure range of 2.5 to 8 bar. It delivers a 36 ms switching time reversal, a 100% duty cycle, and a 27 mA required current consumption while operating with any assembly position and throttleable exhaust-air function. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →Festo
547023
Solenoid valve VSNB-F-M52-M-G14-1A1-EX4A
The Festo 547023 is an electrical 5/2 monostable industrial component featuring a 44.5 mm width, an 8 mm nominal size, and a piston slide design structure with freedom from overlap and a soft sealing principle. This piloted valve conforms to the VDI/VDE 3845 NAMUR standard, operates at a working and pilot pressure range of 2.5 to 8 bar, delivers a standard nominal flow rate of 950 l/min, and provides an IP65 protection class with a mechanical spring reset and throttleable exhaust-air function. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Festo
547022
Basic valve VSNB-F-B52-G14-P2
The Festo 547022 is a 44.5 mm wide piston slide industrial component featuring a 5/2 bistable valve function and a standard nominal flow rate of 950 l/min. Operating on compressed air within a working and pilot pressure range of 2.5 to 8 bar, this VDI/VDE 3845 (NAMUR) standard-conforming unit includes a soft sealing principle, throttleable exhaust-air function, and freedom from overlap with a 30 ms reversal switching time. It operates at a 100% duty cycle across a medium temperature range of -10 to 60 °C and achieves a corrosion resistance classification CRC of 2. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547021
Basic valve VSNB-F-M52-M-G14-P2
The Festo part number 547021 is a 5/2 monostable industrial component featuring a 44.5 mm width, a piston slide design structure, and a standard nominal flow rate of 950 l/min conforming to the VDI/VDE 3845 (NAMUR) standard. Operating within a working and pilot pressure range of 2.5 to 8 bar, this unit incorporates a mechanical spring reset, soft sealing principle, throttleable exhaust-air function, and freedom from overlap with a 100% duty cycle. It utilizes compressed air matching ISO8573-1:2010 [7:4:4] as an operating medium, allows for subsequently required lubricated operation, achieves a CRC corrosion resistance classification of 2, and features a nominal size of 8 mm with switching times of 30 ms on and 100 ms off in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Festo
547014
Air solenoid valve CDVI5.0-MT2H-1X3OLS-EXT
The Festo 547014 is a pilot-controlled 3/2 open monostable industrial component featuring a piston gate valve structural design and a soft sealing principle. Operating at 24V DC with an operating pressure range of -0.9 bar to 10 bar and a normal nominal flow rate of 500 l/min, this unit incorporates a pneumatic spring reset method, non-detenting manual override, and an external pilot air supply port. It delivers a b-value of 0.34, a C value of 2.05 l/sbar, a 14 ms off switching time, and requires a forced dynamization switching frequency of at least once a month. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →Festo
547869
Power supply unit SVG-1/230VAC-ASI-5A
The Festo part number 547869 is an industrial component featuring a single-phase primary supply, an AC input voltage range of 100 to 240 V at a line frequency of 45 to 65 Hz, an input current of 2.1 to 1.0 A, and a nominal DC output voltage of 30.1 V at 4.8 A. Measuring 70 mm in width, 130 mm in height, and 125 mm in length with a product weight of 900 g, this unit offers free convection assembly positioning, 20 ms power failure buffering, and IP20 protection class while utilizing top-hat rail mounting. Operating within an ambient temperature range of -25 to 70 °C, storage temperatures from -40 to 85 °C, and up to 95% relative air humidity, the assembly holds C-Tick and c UL us - Listed (OL) authorizations, carries CE compliance under EU-EMV and low voltage guidelines, and contains PWIS substances. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →Festo
547013
Air solenoid valve CDVI5.0-MT2H-1X3GLS-EXT
The Festo 547013 is a pilot-controlled 3/2 closed, monostable industrial component utilizing a piston gate valve structural design with a soft sealing principle and a 5 mm nominal width. Operating on 24V DC with an operating pressure range of -0.9 bar to 10 bar and a normal nominal flow rate of 500 l/min, this unit features a pneumatic spring reset method, an external pilot air supply port, and an exhaust air function with a flow control option. Additional specifications include non-detenting manual override, reversible flow direction, a 14 ms off switching time, and a required switching frequency of at least once a month for forced dynamization. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →