Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 532219 is an industrial component featuring a CAN protocol fieldbus interface with two 5-spring-loaded terminals configured for looped-through BUS In and BUS Out connections supporting 5 mm to 10 mm cable diameters. Constructed with a reinforced PA housing, brass union nut, steel screws, and NBR seals, this 60 g device measures 20 mm in width, 62 mm in height, and 61 mm in length while providing IP65 and IP67 degrees of protection per IEC 60529 when mounted. It operates within an ambient temperature range of 0 °C to 50 °C, a storage temperature range of -20 °C to 70 °C, 95% non-condensating relative air humidity, VDMA24364-B2-L LABS conformity, and RoHS compliance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 532891, is a double-acting profile barrel actuator featuring an 80 mm piston diameter, a 200 mm stroke, and an M20x1,5 male piston rod thread conforming to ISO 15552. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a 0.6 to 12 bar working pressure range and -20 to 80 °C ambient temperature, it delivers theoretical forces of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar. The unit incorporates adjustable pneumatic cushioning at both ends (PPV) with a 32 mm cushioning length, 2 J end-position impact energy capacity, position detection for proximity sensors, and CRC 2 corrosion resistance for any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 531620 is an industrial component featuring a nominal width of 2.7 mm, an M5 internal thread pneumatic connection 1, and a normal nominal flow rate of 84 l/min to 135 l/min normalized to DIN 1343. Constructed with a nickel-plated brass housing, threaded coupling, NBR seals, and high-alloy stainless steel spring, ball, and circlip, this 12 g unit operates within a pressure range of -0.095 MPa to 1.2 MPa and an ambient temperature range of -10 °C to 60 °C. It accommodates compressed air according to ISO 8573-1:2010 [7:-:-] with lubricated operation possible, possesses a corrosion resistance class of 1, and requires a nominal tightening torque of 0.85 Nm with a ±15% tolerance. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 532218 industrial component features an integrated RBST bridge and an Interbus protocol with a 1x 5 spring-loaded terminal fieldbus interface supporting cable diameters from 5 mm to 10 mm. Housed in reinforced PA with a brass union nut, steel screws, and NBR seals, this 60 g unit measures 20 mm in width, 62 mm in height, and 61 mm in length. It provides IP65 and IP67 degrees of protection in the mounted state per IEC 60529, operates within an ambient temperature range of 0 °C to 50 °C, and complies with RoHS and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 532890 is a double-acting industrial component featuring an 80 mm piston diameter and a 160 mm stroke with a male M20x1,5 piston rod thread. Conforming to ISO 15552, this profile barrel design operates within a 0.6 to 12 bar working pressure range using compressed air in accordance with ISO 8573-1:2010 [7:4:4] and includes adjustable pneumatic cushioning at both ends. It delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar across an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo industrial component, part number 532217, features an integrated RBST bridge and an Interbus protocol operating via a fieldbus interface with one 5-spring-loaded terminal. Housed in reinforced polyamide with brass union nuts, steel screws, and NBR seals, this 60 g device measures 20 mm in width, 62 mm in height, and 61 mm in length. It achieves IP65 and IP67 protection ratings according to IEC 60529 when mounted, accommodates approved cable diameters from 5 mm to 10 mm, and conforms to VDMA24364-B2-L LABS alongside RoHS material standards. Operating ambient temperatures span 0 °C to 50 °C with storage tolerances between -20 °C and 70 °C at a relative air humidity of up to 95% non-condensating. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 532889 is a double-acting industrial component featuring an 80 mm piston diameter, a 125 mm stroke, and an M20x1,5 male piston-rod thread. Built with a profile barrel design structure and adjustable pneumatic cushioning at both ends, this unit conforms to ISO 15552 and operates on compressed air within a working pressure range of 0.6 to 12 bar. It delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar, while supporting an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 531234 is an MS-series size 4 filter regulator featuring a structural design with a pressure gauge, a 5 µm filtration grade, and a 75% degree of condensate separation with a maximum condensate volume of 19 ml. It incorporates a fully automatic and manual non-detenting condensate drain, a rotary knob actuator lock with detent that can be closed with accessories, a plastic bowl guard, and operates within a pressure regulation range of 0.3 bar to 7 bar at an operating pressure of 0.2 MPa to 1.2 MPa. Designed for vertical ±5° mounting with a normal nominal flow rate of 900 l/min, it provides constant output pressure with secondary exhausting and return flow characteristic for compressed air per ISO 8573-1:2010 [7:4:-] or inert gases. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 532216 is a PROFIBUS industrial component measuring 20 mm in width, 62 mm in height, and 61 mm in length with a product weight of 60 g. Featuring a DIL switch control element and 2x 2 spring-loaded terminals for the fieldbus interface, this unit supports the deactivation of the forwarding bus segment and accommodates approved cable diameters from 5 mm to 10 mm. Built with a PA-reinforced housing, brass union nut, steel screws, and NBR seals, it delivers IP65 and IP67 degrees of protection in the mounted state as per IEC 60529, operating within an ambient temperature range of 0 °C to 50 °C. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 532888 is a double-acting industrial component featuring an 80 mm piston diameter and a 100 mm stroke, operating within a pressure range of 0.6 to 12 bar using compressed air in accordance with ISO8573-1:2010 [7:4:4]. Built with a profile barrel design, male M20x1,5 piston rod thread, and adjustable pneumatic cushioning at both ends (PPV), this unit conforms to ISO 15552 and delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar. Position detection is enabled for proximity sensors, and the assembly supports any mounting position across an ambient temperature range of -20 to 80 °C with a CRC rating of 2. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 531233 is an MS-series Size 4 filter regulator with a pressure gauge, featuring a 5 µm filtration grade and a 75% condensate separation degree. This component provides constant output pressure with secondary exhausting and return flow characteristics, operating within a 2 bar to 12 bar pressure range and delivering a normal nominal flow rate of 1500 l/min. Designed with a fully automatic and manual non-detenting condensate drain, a plastic bowl guard, and a rotary knob actuator lock with detent, it operates on compressed air according to ISO 8573-1:2010 [7:4:-] or inert gases under moderate corrosion stress (CRC 2). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 532887 is a double-acting industrial component featuring an 80 mm piston diameter, an 80 mm stroke, and a male M20x1,5 piston rod thread conforming to ISO 15552. Operating at working pressures between 0.6 and 12 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4], this profile barrel actuator delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar. It incorporates adjustable pneumatic cushioning (PPV) at both ends with a 32 mm cushioning length, 2 J end-position impact energy capacity, and proximity sensor position detection capability for any assembly position across an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this single-ended piston rod variant with corrosion resistance classification CRC 2.
View product details →
Festo
The Festo 532196 is an industrial component of the MS series in size 6, featuring a product weight of 121 g with RoHS compliant materials. This assembly includes steel brackets and steel screws, offering a corrosion resistance class (CRC) of 2 for moderate corrosion stress and VDMA24364-B1/B2-L LABS (PWIS) conformity. It operates within a medium temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 531557 is an industrial component featuring a size 6 MS series structural design utilizing a sinter filter with a centrifugal separator and a 40 µm pore size. It operates within a pressure range of 0 bar to 20 bar, delivering a normal nominal flow rate of 3,800 l/min for compressed air as per ISO 8573-1:2010 [-:9:-] or inert gases. The unit includes a manual rotating condensate drain, an integrated metal bowl guard, and achieves a 75% degree of condensate separation within a moderate corrosion stress class (CRC 2). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 531232 is an MS-series size 4 filter regulator with a pressure gauge, featuring a 5 µm filtration grade, a plastic bowl guard, and a manual rotating condensate drain with a 19 ml max capacity. It operates within a 0.8 bar to 14 bar pressure range, providing a 0.3 bar to 7 bar regulation range, constant output pressure with secondary exhausting, and a nominal flow rate of 900 l/min for compressed air or inert gases. Designed for a vertical ±5° mounting position, this component includes a rotary knob with detent actuator lock and achieves 75% condensate separation under moderate corrosion stress. Request a quote today by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo 532886 is a double-acting industrial component featuring an 80 mm piston diameter, a 50 mm stroke, and an M20x1,5 male piston rod thread designed to ISO 15552 standards. Operating within a pressure range of 0.6 to 12 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4], this profile barrel unit delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar. It incorporates adjustable pneumatic cushioning at both ends with a 32 mm cushioning length, position detection for proximity sensors, and an ambient temperature operating range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 532195 is a size 6 industrial component from the MS series featuring a product weight of 76 g, a medium temperature operating range of -10 °C to 60 °C, and a moderate corrosion resistance class (CRC) rating of 2. Constructed with a die-cast aluminum bracket, POM and steel module connectors, steel screws, and NBR seals, this RoHS compliant unit conforms to VDMA24364-B1/B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 531556 from the MS series in size 6, features a 40 µm sinter filter with a centrifugal separator and an integrated metal bowl guard for a 75 % degree of condensate separation. The unit operates within a pressure range of 0 bar to 20 bar, delivers a normal nominal flow rate of 4100 l/min, and supports compressed air as per ISO 8573-1:2010 [-:9:-] or inert gases with a vertical ±5° mounting position. With a moderate corrosion resistance class of 2 and a product weight of 820 g, it maintains a medium and ambient temperature range of -10 °C to 60 °C while outputting air quality class ISO 8573-1:2010 [7:8:4] via a rotating manual condensate drain. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 532885 is a double-acting industrial component featuring an 80 mm piston diameter, a 40 mm stroke, and an M20x1,5 male piston-rod thread. Built with a profile barrel design structure and adjustable pneumatic cushioning at both ends (PPV), this unit operates on compressed air within a 0.6 to 12 bar working pressure range and conforms to ISO 15552 standards. It delivers a theoretical force of 3,016 N on the advance stroke and 2,721 N on the return stroke at 6 bar, while supporting an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 532188 is an industrial component belonging to the MS series in size 6, featuring a wrought aluminum alloy nut and weighing 20.9 g. This RoHS compliant part has a corrosion resistance class of 2 for moderate corrosion stress, VDMA24364-B1/B2-L LABS conformity, and a medium temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →