Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 30654 is a double-acting rotary vane industrial component featuring a size 12 design with an adjustable swivel angle ranging from 0 degrees to 180 degrees and a cushioning angle of 2.2 degrees. Operating on compressed air per ISO 8573-1:2010 [7:-:-] within a pressure range of 0.2 MPa to 0.8 MPa, this 200 g unit delivers a theoretical torque of 1 Nm at 6 bar with elastic cushioning rings at both ends. It accommodates any mounting position using a through-hole type of mounting, an M5 pneumatic connection, and handles a maximum axial force of 18 N alongside a maximum radial force of 45 N. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 2736429, features an anodized aluminum adapter plate, steel galvanized screws, and a steel centering pin with a RoHS-compliant material composition. It offers moderate corrosion stress resistance (CRC 2) and VDMA24364-B1/B2-L LABS conformity, supporting any mounting position via through-hole, screw, or centering sleeve installation methods. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2799424 is an industrial component featuring a size 110 design with a 1:1 gear ratio and any mounting position. This unit supports a maximum rotational speed of 5000 rpm, a transferable torque of 25 Nm, and a no-load driving torque of 0.3 Nm, operating with an IP40 degree of protection and VDMA24364 Zone III LABS conformity. Weighing 4990 g with a mass moment of inertia of 799 kgmm², it accommodates actuator interface code D50B and motor-in interface code 100A while maintaining RoHS material compliance across storage temperatures of -25 °C to 60 °C and ambient temperatures of -10 °C to 60 °C at 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 2735960 industrial component utilizes an EtherCAT protocol operating at a 100 Mbit/s baud rate with a maximum address capacity of 128 bytes for both inputs and outputs. Housed in reinforced polyamide with IP65 and IP67 protection ratings, this unit measures 50 mm by 107 mm by 50 mm including the interlinking block and weighs 125 g. It features integrated LED displays for product-specific and bus-specific statuses, channel-oriented and module-oriented diagnostics, and a DIL switch for control. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 2799281 is an industrial component featuring a size 110 design with a 1:1 gear ratio and a transferable torque of 25 Nm. Built with a mass moment of inertia of 799 kgmm² and a no-load driving torque of 0.3 Nm, this unit supports a maximum rotational speed of 5000 rpm and incorporates a D50B actuator interface code alongside an 80G motor-in interface code. Offering an IP65 degree of protection, RoHS compliance, and VDMA24364 Zone III LABS conformity, the 5220 g assembly operates in ambient temperatures from -10 °C to 60 °C and can be mounted in any position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo industrial component, part number 2333638, features an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin with RoHS-compliant materials. It provides moderate corrosion resistance, classified under CRC 2, alongside VDMA24364-B1/B2-L LABS conformity and supports mounting in any position using through-holes, screws, and a centering sleeve. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 2799196 is an industrial component featuring a size 110 design with a 1:1 gear ratio and a transferable torque of 25 Nm. This RoHS compliant unit accommodates any mounting position, offering a maximum rotational speed of 5000 rpm, a no-load driving torque of 0.3 Nm, a mass moment of inertia of 799 kgmm², and a product weight of 5160 g. It includes a D50B actuator interface code and an 80G motor-in interface code, meeting VDMA24364 Zone III LABS conformity with an IP40 degree of protection for ambient temperatures between -10 °C and 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2735411 is an industrial component featuring a size 32 design with an adjustment range of swivel angle from 0 deg to 325 deg and any mounting position. Constructed with an anodized wrought aluminum alloy flange and retainer bracket alongside nickel-plated beryllium bronze stops, this RoHS-compliant part has a product weight of 290 g and a mass moment of inertia JO of 1.3 kgcm². It operates within an ambient temperature of 0 °C to 50 °C, a storage temperature of -20 °C to 60 °C, and includes a corrosion resistance class (CRC) of 1 with VDMA24364-B2-L LABS conformity. Mountable via internal thread, please submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 2333585 industrial component features an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin. It supports any mounting position and utilizes through-holes, screws, and a centering sleeve for installation. This RoHS-compliant part provides a moderate corrosion resistance class (CRC) of 2 and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2734418 industrial component features an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin. It supports any mounting position via a through-hole, screw, or centering sleeve installation, while meeting RoHS compliance and VDMA24364-B1/B2-L LABS conformity with a CRC 2 moderate corrosion stress rating. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo part number 2799150 is an industrial component featuring a size 110 design with a 1:1 gear ratio and a transferable torque of 25 Nm. Weighing 5310 g with a mass moment of inertia of 799 kgmm², this unit operates at a maximum rotational speed of 5000 rpm and incorporates a D50B actuator interface code alongside a 60H motor in interface code. Built with IP65 degree of protection, it functions within an ambient temperature range of -10 °C to 60 °C and adheres to VDMA24364 Zone III LABS conformity with RoHS-compliant materials. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 2333544 is an industrial component featuring an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin with RoHS-compliant material construction. This part supports installation in any mounting position utilizing a through-hole and screw setup or a centering sleeve. It provides a moderate corrosion resistance class (CRC) rating of 2 along with VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 2734291 is an industrial component featuring a nominal length of 84 mm, a mass moment of inertia of 34.8 kgmm², and a transferable torque of 21 Nm with a maximum rotational speed of 6000 rpm. This IP65-rated unit accommodates any mounting position, an actuator interface code of D50, a motor-in interface code of 80G, and a product weight of 1370 g alongside RoHS-compliant materials. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, relative air humidity of 0 to 95%, and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 2798991 is an industrial component featuring an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin. It supports any mounting position and utilizes through-holes, screws, and a centering sleeve for installation, while offering a moderate corrosion resistance class (CRC 2) and VDMA24364-B1/B2-L LABS conformity with RoHS compliant materials. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 2333525 is an industrial component featuring an anodized aluminum adapter plate, a steel centering pin, and galvanized steel screws with RoHS-compliant material construction. This part supports installation in any mounting position via a through-hole and screw setup or a centering sleeve, and provides a moderate corrosion resistance class (CRC) of 2 alongside VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 2946760 is an industrial component featuring a nominal length of 66.5 mm, a mass moment of inertia of 5.87 kgmm², and a product weight of 540 g. It accommodates a transferable torque of 6.5 Nm and a maximum rotational speed of 8000 rpm, utilizing a D32 or D32C actuator interface code alongside a 60H motor input interface. Designed with VDMA24364-B2-L LABS conformity and an IP40 degree of protection, the unit operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95% in any mounting position while maintaining RoHS material compliance. Submit the exact part number, quantity, and application requirements to receive an official quote.
View product details →
Festo
The Festo part number 2734290 is an industrial component featuring a nominal length of 80.4 mm, a mass moment of inertia of 34.8 kgmm², and a transferable torque of 17 Nm with a maximum rotational speed of 6000 rpm. This RoHS-compliant unit weighs 1130 g, incorporates a D50 actuator interface code alongside a 60G motor input interface code, and achieves an IP65 degree of protection. Operating within an ambient temperature range of -10 °C to 60 °C, storage temperatures between -25 °C and 60 °C, and 0 to 95% relative air humidity, it supports any mounting position and meets VDMA24364 zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 2798760 is an industrial component featuring a size 110 configuration, a 1:1 gear ratio, and a transferable torque of 25 Nm with a no-load driving torque of 0.3 Nm. It supports any mounting position, a maximum rotational speed of 5000 rpm, a mass moment of inertia of 799 kgmm², an actuator interface code of D50B, and a motor input interface code of 60H, while maintaining an IP40 degree of protection, VDMA24364 Zone III LABS conformity, and RoHS compliant materials at a product weight of 5280 g. This unit operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 2332584 industrial component features an anodized aluminum adapter plate, galvanized steel screws, and a steel centering pin with a RoHS-compliant material build. This part accommodates any mounting position and utilizes through-holes, screws, and a centering sleeve for installation. It is rated for corrosion resistance class 2 under moderate corrosion stress and conforms to VDMA24364-B1/B2-L LABS (PWIS) requirements. Request a quote by submitting the part number, required quantity, and application specifications.
View product details →
Festo
The Festo industrial component, part number 2946759, features a nominal length of 67.5 mm, a mass moment of inertia of 5.87 kgmm², and a transferable torque of 6.5 Nm with a maximum rotational speed of 8000 rpm. This RoHS compliant unit weighs 540 g, incorporates a D32 actuator interface code and a 60G motor-in interface code, and adheres to VDMA24364 Zone III LABS conformity with an IP65 degree of protection for mounting in any position. It operates within an ambient temperature range of -10 °C to 60 °C, supports a storage temperature of -25 °C to 60 °C, and withstands 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →