Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 157149 is a single-acting industrial component featuring a pulling action, a 63 mm piston diameter, and a 15 mm stroke. It incorporates a square piston rod for torque protection, flexible cushioning rings at both ends, and position detection capabilities for proximity sensors. Operating within a 0.8 to 10 bar pressure range and an ambient temperature span of -20 to 80 °C, this unit delivers a theoretical force of 1,679 N at 6 bar advance stroke using ISO8573-1:2010 [7:4:4] compressed air. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 156873 is a double-acting industrial component featuring a 25 mm piston diameter, a 50 mm stroke, and a piston rod at one end with a guide rod and yoke for anti-torsion protection. Operating within a pressure range of 1 to 10 bar, it delivers a theoretical advancing force of 295 N and a retracting force of 247 N at 6 bar using compressed air according to ISO 8573-1:2010 [7:4:4]. This unit incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and a moderate corrosion stress rating (CRC 2) for operation in ambient temperatures from -20 °C to 80 °C. Request a quote for this part today by submitting your exact part number, required quantity, and application parameters.
View product details →
Festo
The Festo 1587251 is an industrial component featuring a size 86 frame, a 1:1 gear ratio, and a transferable torque of 9.5 Nm with a no-load driving torque of 0.25 Nm. Weighing 2480 g with a mass moment of inertia of 175 kgmm², this unit accommodates a maximum rotational speed of 5000 rpm and utilizes actuator interface code S48 alongside motor input interface code 60G. It is constructed with RoHS compliant materials, conforms to VDMA24364 Zone III LABS (PWIS) standards, and provides an IP40 degree of protection for any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 1584933 industrial component features an IP65 protection class, insulation class F, and a continuous S1 rating according to EN 60034-1 with IEC 60034 conformity. It operates on a 565 V nominal DC voltage utilizing a star-inside winding switch, six pole pairs, and a DIN 6885 A 10 x 8 x 40 featherkey shaft design. This unit includes a PTC resistor for temperature monitoring, a plug electrical connector system, and exhibits a CRC 2 moderate corrosion stress classification with RoHS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157148 is a single-acting industrial component featuring a pulling action, a 63 mm piston diameter, and a 10 mm stroke with flexible cushioning rings or plates at both ends. Designed with a square piston rod for torque protection and a female thread on the piston-rod end, it operates on compressed air complying with ISO8573-1:2010 [7:4:4] at working pressures between 0.8 and 10 bar. The unit delivers a theoretical force of 1,679 N at a 6 bar advance stroke, incorporates position detection for proximity sensors, and functions within an ambient temperature range of -20 to 80 °C with a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 15872 is an industrial component featuring a nominal width of 1.5 mm, an M3 external thread for pneumatic connection 1, and a connection for a 4 mm outside diameter pneumatic tubing at pneumatic connection 2. It utilizes a sealing ring on the screwed plug and a high-alloy steel housing that is RoHS compliant with VDMA24364-B1/B2-L LABS conformity. Operating within a temperature range of 0 °C to 60 °C, this unit handles an operating pressure of -0.95 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:-:-], with oil lubrication permitted and required for further use. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156872 is a double-acting industrial component featuring a 25 mm piston diameter, a 40 mm stroke, and a piston rod at one end configured with a guide rod and yoke for anti-torsion protection. It operates on compressed air according to ISO 8573-1:2010 [7:4:4] within a 1 bar to 10 bar pressure range and an ambient temperature span of -20 °C to 80 °C, delivering a theoretical force of 295 N advancing and 247 N retracting at 6 bar. Position sensing is enabled via proximity switch, and the unit incorporates elastic cushioning rings at both ends to absorb 0.1 J of end-position impact energy. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1584932 is an industrial component featuring a nominal operating and DC voltage of 565 V, a star inside winding switch, and 6 pole pairs conforming to IEC 60034. It is built with an IP65 protection class, insulation protection class F, a DIN 6885 A 10 x 8 x 40 featherkey shaft design, and integrated PTC resistor temperature monitoring for continuous S1 rating operation according to EN 60034-1. The unit operates within an ambient temperature range of -10 to 40 °C, supports storage temperatures from -20 to 60 °C, manages 0 to 90 % relative air humidity, and provides CRC 2 moderate corrosion stress resistance with RoHS and VDMA24364-B2-L PWIS conformity. It carries RCM Mark, c UL us Recognized, CE, and UKCA authorizations, utilizing a plug electrical connector system. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157147 is a single-acting industrial component featuring a pulling action, a 50 mm piston diameter, and a 25 mm stroke driven by a square piston rod that provides protection against torque and guides. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a working pressure range of 0.8 to 10 bar, this unit delivers a theoretical force of 999 N at 6 bar on the advance stroke and incorporates flexible cushioning rings or plates at both ends with an impact energy rating of 0.64 J in end positions. Designed with a single-ended piston rod, female thread connection, and capability for position detection via proximity sensor, it functions across an ambient temperature range of -20 to 80 °C and features a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 158710 is a single-acting industrial component featuring a 32 mm piston diameter, an adjustable stroke of 1 to 15 mm, and a pulling action design structure incorporating a piston, piston rod, profile barrel, and a guide rod with yoke. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a 1 to 10 bar working pressure range, this unit delivers a theoretical force of 388 N at 6 bar and includes flexible cushioning rings or plates at both ends. It is equipped with heat-resistant seals supporting an ambient and operating temperature range of -20 to 120 °C, brass cover material, and provisions for position detection via proximity sensor. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 156871 is a double-acting industrial component featuring a 25 mm piston diameter, a 30 mm stroke, and a guide rod with yoke for torsion protection. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a 1 bar to 10 bar pressure range, this unit delivers theoretical forces of 295 N advancing and 247 N retracting at 6 bar. It incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and a moderate corrosion resistance class (CRC 2) for ambient temperatures between -20 °C and 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1584931 is an industrial component featuring a nominal operating voltage of 565 V DC, a star inside winding switch type, and 6 pole pairs. Conforming to IEC 60034 with an S1 rating class, Class F insulation protection, and an IP65 protection class, this unit operates within an ambient temperature range of -10 to 40 °C and supports storage temperatures from -20 to 60 °C. The assembly includes a DIN 6885 A 10 x 8 x 40 featherkey shaft design, a plug electrical connector system, PTC resistor temperature monitoring, and a CRC 2 moderate corrosion resistance classification. Complying with RoHS, VDMA24364-B2-L PWIS, CE, and UKCA directives alongside RCM and cULus authorizations, it accommodates 0 to 90% relative air humidity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157146 is a single-acting industrial component featuring a pulling action, a 50 mm piston diameter, and a 20 mm stroke with a square piston rod for torque protection and integrated flexible cushioning rings at both ends. Operating within a working pressure range of 0.8 to 10 bar using ISO8573-1:2010 [7:4:4] compressed air, this unit delivers a theoretical force of 999 N at 6 bar during the advance stroke across an ambient temperature range of -20 to 80 °C. It is constructed with a single-ended piston rod, position detection capabilities for a proximity sensor, and a CRC 2 moderate corrosion resistance classification, with a basic weight of 560 g for a 0 mm stroke. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 15871 is an industrial component featuring a nominal width of 1.5 mm and an external M3 thread for pneumatic connection 1, paired with a connection for 3 mm outside diameter pneumatic tubing at connection 2. Fabricated with a high-alloy steel housing and a sealing ring on the screwed plug, this RoHS compliant part operates within a pressure range of -0.95 bar to 10 bar and an ambient temperature range of 0 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:-:-]. Operation with oil lubrication is possible and required for further use, while LABS conformity follows VDMA24364-B1/B2-L. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156870 is a double-acting industrial component featuring a 25 mm piston diameter, a 25 mm stroke, and a guide rod with a yoke for protection against torsion. Operating within a pressure range of 1 bar to 10 bar utilizing compressed air per ISO 8573-1:2010 [7:4:4], it delivers a theoretical advancing force of 295 N and a retracting force of 247 N at 6 bar. This unit incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and is rated for an ambient temperature range of -20 °C to 80 °C with a moderate corrosion resistance class of CRC 2. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1584930 is an industrial component featuring a nominal operating voltage and nominal voltage DC of 565 V with a star inside winding switch configuration and 6 pole pairs. Conforming to IEC 60034 standards, this unit incorporates insulation protection class F, S1 rating class according to EN 60034-1, and PTC resistor temperature monitoring within an IP65 protection class enclosure. The assembly includes a DIN 6885 A 10 x 8 x 40 featherkey shaft design, an electrical connector plug system, and holds RCM Mark and c UL us Recognized authorizations while complying with EU and UKCA directives for EMC, low voltage, and RoHS. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo 157145 is a single-acting industrial component featuring a pulling action, a 50 mm piston diameter, and a 15 mm stroke enabled by a square piston rod that provides protection against torque and guidance. Operating within a working pressure range of 0.8 to 10 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4], this unit incorporates flexible cushioning rings at both ends and accommodates proximity sensors for position detection. It delivers a theoretical force of 999 N at 6 bar on the advance stroke across an ambient temperature range of -20 to 80 °C, with a basic weight of 560 g for a 0 mm stroke and moderate corrosion resistance classification CRC 2. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 158709 is a single-acting industrial component featuring a 32 mm piston diameter, a 15 mm stroke, and a pulling action operating mode. Designed with a profile barrel, piston rod, and guide rod with yoke, this unit delivers a theoretical force of 388 N at 6 bar and includes flexible cushioning rings at both ends. It operates within a 1 to 10 bar working pressure range across an ambient temperature of -20 to 80 °C using compressed air meeting ISO8573-1:2010 [7:4:4] standards. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 15687 is an industrial component featuring size 32 dimensions and clockwise rotation within a cast aluminum housing. Engineered with case-hardened steel for both the sleeve and shaft, this unit delivers a theoretical torque of 9.98 Nm at 6 bar and weighs 1120 g with VDMA24364-B2-L LABS conformity for any mounting position across an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1584929 is an industrial component featuring a nominal operating voltage of 565 V DC, a star inside winding switch, and 6 pole pairs conforming to IEC 60034. Built with insulation protection class F, a DIN 6885 A 10 x 8 x 40 featherkey shaft design, and an IP65 protection class, it operates within an ambient temperature range of -10 to 40 °C and storage temperatures from -20 to 60 °C. The unit includes PTC resistor temperature monitoring, holds RCM Mark and c UL us Recognized authorizations, and complies with EU and UKCA directives for EMC, low voltage, and RoHS with a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →