Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 1564334 is a size 8 double-acting rotary vane industrial component featuring a swivel angle of 0 degrees to 90 degrees with a 0.5-degree cushioning angle and elastic cushioning rings or pads at both ends. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within an operating pressure range of 0.4 MPa to 0.8 MPa, this unit supports a max swivel frequency of 3 Hz at 6 bar and accommodates any mounting position. It achieves a repetition accuracy of 1 degree while withstanding a max stop force of 30 N, max axial force of 10 N, and max radial force of 20 N within an ambient temperature range of 0 degrees C to 60 degrees C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 1550979 is an industrial component featuring a nominal operating voltage of 565 V DC, four pole pairs, and a star inside winding switch configuration, delivering a standstill torque of 2.53 Nm, a nominal torque of 2.26 Nm, and a peak torque of 8.55 Nm. Built with insulation protection class F and an IP54 protection class, this unit operates in ambient temperatures from -10 to 40 °C, supports storage temperatures between -20 and 60 °C, and integrates a PTC resistor for temperature monitoring via a plug electrical connector system. It conforms to standard IEC 60034, maintains a rating class of S1 according to EN 60034-1, complies with the RoHS materials note, features a moderate corrosion resistance classification CRC of 2, and carries RCM Mark and c UL us Recognized authorizations alongside CE symbols for the EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 156256 is a single-acting industrial component featuring a 50 mm piston diameter and an adjustable stroke from 1 mm to 25 mm. Operating within a pressure range of 0.08 MPa to 1 MPa (0.8 bar to 10 bar / 11.6 psi to 145 psi), this model utilizes elastic cushioning rings at both ends and includes position sensing for proximity sensors. Constructed with heat-resistant seals supporting ambient temperatures up to 120 °C and a corrosion resistance class of CRC 2, it delivers a theoretical advancing force of 1128 N at 6 bar using compressed air per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 153681 is a standard industrial component featuring a nominal size of 8.3 mm and a push/pull design structure with a coated screw-in stud seal. Built with a PBT housing, POM grey release ring, NBR tubing seal, and high-alloy non-corrosive steel hose clamping segment, this assembly operates within a pressure range of -0.95 to 10 bar and ambient temperatures from -10 to 60 °C using filtered compressed air or vacuum. It includes NPT1/2-14 and 1/2-inch outside diameter tubing pneumatic connections, a maximum tightening torque of 30 Nm, Germanischer Lloyd authorization, and RoHS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 156433 is a single-acting industrial component featuring a pulling action, a 25 mm piston diameter, and an adjustable stroke from 1 to 25 mm with a square piston rod for torque protection. It operates on compressed air in accordance with ISO 8573-1:2010 [7:4:4] at working pressures between 1 and 10 bar, utilizing flexible cushioning rings at both ends and heat-resistant seals rated for ambient temperatures up to 120 °C. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 1550978 industrial component operates at a nominal DC voltage of 565 V with a star-inside winding switch configuration and four pole pairs, delivering a standstill torque of 2.53 Nm, a nominal torque of 2.26 Nm, and a peak torque of 8.55 Nm. Built to IEC 60034 standards with an IP54 protection class, insulation class F, and S1 rating class per EN 60034-1, this unit features PTC resistor temperature monitoring, a plug electrical connector system, and RoHS-compliant materials with a CRC 2 moderate corrosion resistance classification. It functions within an ambient temperature range of -10 to 40 °C, a storage temperature range of -20 to 60 °C, and 0 to 90 percent relative air humidity, carrying RCM and cULus recognitions alongside CE conformity under EU-EMV and low voltage guidelines. Request a quote today by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo 153680 is a standard industrial component featuring a 7.5 mm nominal size and a push/pull design structure with a grey release ring. It operates within a working pressure range of -0.95 to 10 bar and an ambient temperature range of -10 to 60 °C, utilizing an NPT3/8-18 pneumatic connection for 1/2" outside diameter tubing with a coated screw-in stud. Constructed with a PBT housing, POM release ring, NBR tubing seal, and high-alloy non-corrosive steel hose clamping segment, it supports filtered compressed air and vacuum media while meeting RoHS material standards and Germanischer Lloyd authorization. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156255 is a single-acting industrial pneumatic component featuring a 40 mm piston diameter, an adjustable stroke from 1 mm to 25 mm, and internal thread piston rod end construction with elastic cushioning rings at both ends. Operating across a pressure range of 0.08 MPa to 1 MPa (0.8 bar to 10 bar / 11.6 psi to 145 psi) with compressed air conforming to ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical advancing force of 704 N at 6 bar and supports ambient temperatures up to 120 °C via heat-resistant seals. It incorporates position sensing capabilities for proximity sensors, a CRC 2 moderate corrosion stress rating, and permits optional oil lubrication while maintaining a basic weight of 433 g at 0 mm stroke. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156432 is a single-acting industrial component featuring a pulling action, a 20 mm piston diameter, and an adjustable stroke ranging from 1 to 25 mm. This piston and piston rod assembly operates within a working pressure of 1 to 10 bar using compressed air in accordance with ISO8573-1:2010 [7:4:4] and includes heat resistant seals supporting an ambient temperature of 0 to 120 °C. Design characteristics include a square piston rod for torque protection, flexible cushioning rings at both ends, and provisions for position detection via proximity sensor. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 1550977 is an industrial component featuring a nominal operating and DC voltage of 565 V, a standstill torque of 2.53 Nm, a nominal torque of 2.26 Nm, and a peak torque of 8.55 Nm with 4 pole pairs and a star-inside winding switch. Conforming to IEC 60034, this unit is rated S1 according to EN 60034-1, incorporates a PTC resistor for temperature monitoring, and achieves an IP54 protection class with insulation class F. Operating within an ambient temperature range of -10 to 40 °C and storage limits of -20 to 60 °C at 0 to 90 percent relative air humidity, the assembly features an electrical connector system with a plug, holds a CRC 2 moderate corrosion resistance classification, and complies with RoHS materials notes, the RCM Mark, c UL us Recognized (OL) authorization, and CE directives for EMC and low voltage. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 153679 is a standard industrial component featuring a 6.2 mm nominal size, NPT1/2-14 pneumatic connection, and a 3/8" outside diameter tubing port utilizing the push/pull design principle. Constructed with a PBT housing, POM grey release ring, NBR tubing seal, and high alloy non-corrosive steel hose clamping segment, it operates within a pressure range of -0.95 to 10 bar and ambient temperatures from -10 to 60 °C. This RoHS-compliant unit includes a coated screw-in stud with a maximum tightening torque of 30 Nm, supports filtered compressed air and vacuum mediums in any assembly position, and carries Germanischer Lloyd authorization with a CRC 1 corrosion resistance classification. Request a quote today by submitting part number 153679 along with your required quantity and application details.
View product details →
Festo
The Festo 156254 is a single-acting industrial component featuring a 32 mm piston diameter, an adjustable stroke ranging from 1 mm to 25 mm, and internal thread piston rod end construction for pushing operations. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a 0.08 MPa to 1 MPa range, this unit delivers a theoretical advancing force of 450 N at 6 bar and incorporates elastic cushioning rings at both ends to absorb 0.4 J of impact energy. Equipped with heat-resistant seals rated for an ambient temperature range of 0 °C to 120 °C, the assembly achieves a moderate corrosion stress rating of CRC 2 and accommodates position sensing via proximity sensors in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156431 is a single-acting industrial component featuring a pulling action, a 16 mm piston diameter, and an adjustable stroke from 1 to 25 mm with a square piston rod for torque protection. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] across a working pressure range of 1.3 to 10 bar, this unit incorporates flexible cushioning rings at both ends and heat-resistant seals rated for ambient temperatures up to 120°C. It provides a theoretical force of 81 N at 6 bar during the advance stroke, a CRC 2 moderate corrosion resistance classification, and integration capability for proximity sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 1550976 industrial component operates with a nominal DC voltage of 565 V, featuring 4 pole pairs, a star inside winding switch, a standstill torque of 2.53 Nm, a nominal torque of 2.26 Nm, and a peak torque of 8.55 Nm. Built to conform to IEC 60034 with an IP54 protection class and insulation protection class F, it includes PTC resistor temperature monitoring, operates within an ambient temperature range of -10 to 40 °C, and carries RCM and c UL us authorizations along with CE conformity according to EU-EMV and low voltage guidelines. This RoHS-compliant part exhibits a moderate corrosion resistance classification of CRC 2, supports a 0 to 90% relative air humidity range, and is rated S1 under EN 60034-1 with storage temperatures from -20 to 60 °C using a plug electrical connector system. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 153678 is a standard industrial component featuring a 6.2 mm nominal size, NPT3/8-18 pneumatic connection, and a push/pull design structure with a grey release ring. Built with a PBT housing, POM release ring, NBR tubing seal, and non-corrosive high-alloy steel hose clamping segment, it operates across a working pressure and temperature-dependent working pressure of -0.95 to 10 bar, an ambient temperature range of -10 to 60 °C, and a maximum tightening torque of 24 Nm. This RoHS-compliant component handles filtered compressed air or vacuum in any assembly position, includes a coated screw-in stud seal, features CRC 1 corrosion resistance, holds Germanischer Lloyd authorization, and is supplied in a container size of 1. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156253 is a single-acting, pushing industrial component featuring a 25 mm piston diameter, an adjustable stroke from 1 mm to 25 mm, and elastic cushioning rings or pads at both ends. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar (0.1 MPa to 1 MPa), this unit supports an ambient temperature range of 0 °C to 120 °C via heat-resistant seals and delivers a theoretical advancing force of 269 N at 6 bar. Position sensing is enabled for proximity sensors, while the structure accommodates any mounting position with a moderate corrosion resistance class (CRC 2) and VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 156429 is a single-acting industrial component featuring a pulling action, a 100 mm piston diameter, and an adjustable stroke from 1 to 25 mm with a square piston rod for torque protection. It operates on compressed air within a working pressure range of 0.8 to 10 bar, incorporating flexible cushioning rings at both ends and integrated position detection for proximity sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
The Festo part number 153677 is a standard industrial component featuring a 6.2 mm nominal size and a push/pull design structure with a coated screw-in stud seal. Operating within a working pressure range of -0.95 to 10 bar and an ambient temperature range of -10 to 60 °C, this unit accommodates filtered compressed air and vacuum media through an NPT1/4-18 pneumatic connection for 3/8" outside diameter tubing. The assembly utilizes a PBT housing, POM grey release ring, NBR tubing seal, and high-alloy non-corrosive steel hose clamping segment, supporting a maximum tightening torque of 14 Nm in any assembly position while maintaining Germanischer Lloyd authorization and RoHS compliance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered by Festo, the part number 1550975 is an industrial component featuring a 360 V nominal DC operating voltage, 4 pole pairs, a standstill torque of 2.57 Nm, and a nominal torque of 2.28 Nm. Constructed with an IP65 protection class, insulation class F, and a featherkey shaft design conforming to DIN 6885 A 4 x 4 x 16, this unit operates within an ambient temperature range of -40 to 40 °C under S1 rating class according to EN 60034-1. It complies with IEC 60034 standards, incorporates PTC resistor temperature monitoring, and carries RCM Mark and c UL us Recognized authorizations alongside EU-EMV and low voltage guideline CE conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 156428 is a single-acting industrial component featuring a pulling action, an 80 mm piston diameter, and an adjustable stroke from 1 to 25 mm with a square piston rod for torque protection. Operating on compressed air in accordance with ISO 8573-1:2010 [7:4:4] within a 0.8 to 10 bar working pressure range, this unit incorporates flexible cushioning rings at both ends and delivers a theoretical force of 2,733 N at 6 bar during the advance stroke. Designed with a female thread piston-rod end and a moderate corrosion resistance classification CRC 2, it functions within an ambient temperature range of -20 to 80 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →