Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 156344 is a single-acting industrial component featuring a 32 mm piston diameter, an adjustable stroke from 1 to 25 mm, and a square piston rod for torque protection and guidance. Operating within a 1 to 10 bar working pressure range and an ambient temperature range of 0 to 120 °C, this unit utilizes flexible cushioning rings at both ends and includes heat-resistant seals rated up to 120 °C. It provides a theoretical force of 382 N at 6 bar advance stroke, features a G1/8 pneumatic connection, and accommodates position detection via proximity sensor with optional mounting configurations. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 153435 is a standard L-shaped industrial component featuring a nominal width of 5.2 mm and a push-pull structural design with a coated screwed plug seal for any mounting position. It operates with compressed air per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C, supporting lubricated operation and accommodating an extensive range of approved tubing types including PAN, PEN, PUN, and PLN series with a 20.2 mm insertion depth. This part delivers an operating pressure of -0.095 MPa to 0.6 MPa across the full temperature range and -0.095 MPa to 1.4 MPa under temperature-dependent conditions, backed by a nominal tightening torque of 9 Nm with a ±20% tolerance and CRC 1 low corrosion stress resistance. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo part number 1548037 is a double-acting industrial component featuring a 250 mm piston diameter, a 250 actuator size, and a stroke length ranging from 40 to 990 mm with a 4 mm stroke reserve. Constructed with a piston, piston rod, tie rod, and cylinder barrel design, it operates at a working pressure of 3 to 8 bar (0.3 to 0.8 MPa or 43.5 to 116 psi) and includes an integrated potentiometer displacement encoder with polarity protection for the operating voltage, set point value, and initialization connection. This un-cushioned unit conforms to ISO 5210 for fitting connections, supports any assembly position, operates on a 21.6 to 26.4 V DC operating voltage range, and outputs a 4 - 20 mA analog signal at a nominal pressure of 6 bar (0.6 MPa). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156343 is a single-acting industrial component featuring a 25 mm piston diameter, an adjustable stroke ranging from 1 to 25 mm, and a square piston rod for integrated torque protection and guidance. Operating within a working pressure range of 1.2 to 10 bar utilizing compressed air in accordance with ISO8573-1:2010 [7:4:4], this unit delivers a theoretical advance stroke force of 221 N at 6 bar and incorporates heat-resistant seals supporting ambient temperatures up to 120 °C. Position detection is enabled for proximity sensors, and flexible cushioning rings or plates are located at both ends to manage 0.1 J of impact energy in the end positions. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a 32 mm piston diameter and a stroke length adjustable from 1 to 300 mm, this Festo double-acting industrial component features a square piston rod for torque and guide protection alongside flexible cushioning rings at both ends. The unit operates on compressed air within a working pressure range of 1 to 10 bar (14.5 to 145 psi) and supports ambient temperatures up to 120 °C utilizing heat-resistant seals. It delivers a theoretical retracting force of 415 N at 0.6 MPa while maintaining a CRC 2 moderate corrosion resistance classification and VDMA24364-B1/B2-L PWIS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1548032 is a double-acting industrial component featuring a 200 mm piston diameter and an adjustable stroke ranging from 40 to 990 mm with a 4 mm stroke reserve. Designed with a piston, piston rod, tie rod, and cylinder barrel structure, this unit operates at a working pressure of 3 to 8 bar (0.3 to 0.8 MPa) and incorporates an integrated potentiometer displacement encoder with a 4 - 20 mA analog output. It supports an operating voltage range of 21.6 to 26.4 V DC with polarity protection for the operating voltage, set point value, and initialization connection, while conforming to ISO 5210 fitting connections with F10 and F14 flange hole patterns. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo part number 153434 is a standard-sized, L-shaped industrial component featuring a 4.3 mm nominal width and an 18.2 mm tubing insertion depth utilizing the push-pull principle with a sealed screwed plug. It operates with compressed air per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C and supports lubricated operation with a nominal tightening torque of 15.5 Nm (±20%). This component is compatible with a wide range of approved Festo tubing types including PAN, PEN, PUN, and PLN series. Submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 156342 is a single-acting industrial component featuring a 20 mm piston diameter, an adjustable stroke from 1 to 25 mm, and a square piston rod providing torque protection and guidance. Operating on compressed air within a working pressure range of 1.2 to 10 bar, this unit includes flexible cushioning rings at both ends, position detection capabilities for proximity sensors, and heat-resistant seals supporting ambient temperatures up to 120 °C. It delivers a theoretical force of 132 N at 6 bar during the advance stroke, incorporates an M5 pneumatic connection, and achieves a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156183 is a double-acting industrial component featuring a 25 mm piston diameter, a square piston rod for torque protection, and a variable stroke ranging from 1 to 200 mm. Operating on compressed air compliant with ISO8573-1:2010 [7:4:4] within a pressure range of 0.12 to 1 MPa (1.2 to 10 bar / 17.4 to 145 psi), this unit incorporates flexible cushioning rings at both ends and heat-resistant seals rated for a maximum ambient temperature of 120 °C. It delivers a theoretical retracting force of 247 N at 0.6 MPa (6 bar, 87 psi) and includes provisions for position detection via proximity sensor across any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1548030 is a double-acting industrial component featuring a 200 mm piston diameter, an actuator size of 200, and an adjustable stroke ranging from 40 to 990 mm with a 4 mm stroke reserve. Designed with a piston, piston rod, tie rod, and cylinder barrel, this un-cushioned unit operates within a working pressure range of 3 to 8 bar (0.3 to 0.8 MPa or 43.5 to 116 psi) at a nominal pressure of 6 bar (0.6 MPa). It includes an integrated potentiometer displacement encoder for position detection, polarity protection for operating voltage, set point value, and initialization connection, along with a 4 to 20 mA analog output operating on a 21.6 to 26.4 V DC voltage range. This unit features an F10 and F14 flange hole pattern conforming to ISO 5210 for fitting connections and supports assembly in any position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 153433 is an L-shaped industrial component utilizing a push-pull structural design with a standard size and a 4.1 mm nominal width. It accommodates a wide range of approved tubing types—including PAN, PEN, PFAN, PLN, PUN, and their variants—with an 18.2 mm tubing insertion depth and a coated seal on the screwed plug. Operating parameters span a temperature-dependent pressure range of -0.95 bar to 14 bar and an entire-temperature-range pressure of -0.95 bar to 6 bar for compressed air under ISO 8573-1:2010 [7:-:-], with a nominal tightening torque of 9 Nm at ±20% tolerance. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 156182 is a double-acting industrial component featuring a 20 mm piston diameter, an adjustable stroke from 1 to 200 mm, and a square piston rod for torque protection and guidance. Designed with heat-resistant seals supporting temperatures up to 120 °C and flexible cushioning rings at both ends, this unit operates within a pressure range of 0.12 to 1 MPa (1.74 to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156341 is a single-acting industrial component featuring a 16 mm piston diameter, a 1 to 25 mm stroke, and a square piston rod for torque protection and guidance. This piston and piston rod design operates on compressed air within a 1.3 to 10 bar working range and incorporates flexible cushioning rings at both ends with an end-position impact energy of 0.1 J. Constructed with high alloy steel flange screws and heat-resistant seals rated for temperatures up to 120°C, it supports any assembly position and includes position detection for proximity sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1548028 is a double-acting industrial component featuring a 160 mm piston diameter, an actuator size of 160, and an ISO 5210 compliant fitting connection with an F10 flange hole pattern. This profile barrel design incorporates a piston rod, un-cushioned operation, an adjustable stroke ranging from 40 to 990 mm with a 3 mm stroke reserve, and an integrated potentiometer displacement encoder with a 4 - 20 mA analog output. Operating within a pressure range of 0.3 to 0.8 MPa (3 to 8 bar or 43.5 to 116 psi) at a nominal working pressure of 6 bar (0.6 MPa), the unit requires a DC operating voltage between 21.6 and 26.4 V and provides polarity protection for the operating voltage, set point value, and initialization connection in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal price quote.
View product details →
Festo
The Festo 156181 is a double-acting industrial component featuring a 16 mm piston diameter, a square piston rod for torque protection, and an adjustable stroke ranging from 1 to 200 mm. Built with flexible cushioning rings at both ends and heat-resistant seals supporting temperatures up to 120 °C, this unit operates within a pressure range of 1.5 to 10 bar utilizing compressed air in accordance with ISO 8573-1:2010 [7:4:4]. It provides position detection capabilities via proximity sensors, a CRC rating of 2 for moderate corrosion stress, and a theoretical retracting force of 90 N at 0.6 MPa. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 15634 is a straight-design industrial component featuring a 7.6 mm nominal width, a G3/8 external thread for pneumatic connection 1, and a connection for a 9 mm inside diameter pneumatic tubing as pneumatic connection 2. Fabricated from a brass housing with a sealing ring on the screwed plug, this component operates within a pressure range of -0.95 bar to 16 bar across an ambient temperature range of -10 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:-:-]. Each pack size contains 10 units, weighing 27.14 g each, with a maximum tightening torque of 15 Nm, low corrosion stress resistance (CRC 1), VDMA24364-B1/B2-L LABS conformity, and RoHS compliance while supporting oil lubrication. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 1548026 is a double-acting industrial component featuring a 160 mm piston diameter, an actuator size of 160, and an adjustable stroke ranging from 40 to 990 mm with a 3 mm stroke reserve. Designed with a piston, piston rod, and profile barrel structure, this unit operates within a pressure range of 0.3 to 0.8 MPa (3 to 8 bar or 43.5 to 116 psi) at a nominal operating pressure of 0.6 MPa (6 bar) and integrates an un cushioned displacement encoder with a potentiometer measuring method and a 4-20 mA analog output. It requires a DC operating voltage range of 21.6 to 26.4 V with polarity protection for the operating voltage, set point value, and initialization connection, and conforms to the ISO 5210 standard for fitting connections in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 153357 is a mini T-shaped industrial component featuring a 3.3 mm nominal width, 12 mm tubing insertion depth, one supply line, and two outlets utilizing a push-pull structural design with a coated screwed plug. It operates within a temperature range of -10 °C to 80 °C using compressed air per ISO 8573-1:2010 [7:-:-], supporting standard operating pressures from -0.095 MPa to 0.6 MPa and temperature-dependent pressures up to 1.4 MPa. Each unit weighs 8 g, exhibits a corrosion resistance class of 1, and requires a nominal tightening torque of 7 Nm with a ±20% tolerance across any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 156180 is a double-acting industrial component featuring a 12 mm piston diameter, a stroke length ranging from 1 to 200 mm, and a square piston rod for torque protection and guidance. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] within a pressure range of 0.15 to 1 MPa (1.5 to 10 bar or 21.75 to 145 psi), this unit incorporates flexible cushioning rings at both ends and heat-resistant seals supporting ambient temperatures up to 120°C. It delivers a theoretical retracting force of 51 N at 0.6 MPa (6 bar, 87 psi) and includes a male piston-rod end, a through piston rod, and position detection capabilities for proximity sensors. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156339 is a single-acting industrial component featuring a 100 mm piston diameter, an adjustable stroke from 1 mm to 25 mm, and a square piston rod that provides integrated protection against torsion. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) and utilizing compressed air as per ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical advancing force of 4222 N at 6 bar via a G1/4 pneumatic connection. It is constructed with elastic cushioning rings at both ends, a through piston rod variant, and a moderate corrosion resistance class (CRC 2) suitable for ambient temperatures between -20 °C and 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →