Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 153317 is a mini straight industrial component featuring a 2.6 mm nominal width, an M5 external thread pneumatic connection 1, and a push-pull structural design with a 12 mm tubing insertion depth. This part operates with compressed air as per ISO 8573-1:2010 [7:-:-], supporting an operating pressure of -0.095 MPa to 0.6 MPa across its entire temperature range and up to 1.4 MPa under temperature-dependent conditions. Designed with a sealing ring on the screwed plug and an internal hex AF2.5 for mounting, each pack size contains 10 units weighing 4.4 g each with a nominal tightening torque of 1.2 Nm (±20%). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 153800 is a standard industrial component featuring a nominal size of 3 mm, one supply line, and four outputs configured for 5/16" and 5/32" outside diameter tubing. Constructed with a nickel-plated brass threaded plug and a grey release ring, this push/pull design operates with compressed air according to ISO 8573-1:2010 [7:-:-] across a pressure range of -0.95 to 10 bar and temperatures from -10 to 60 °C. It includes a coated screw-in stud seal with a maximum tightening torque of 14 Nm, a CRC 1 low corrosion stress rating, and weighs 28 g with RoHS conformance. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 156150 is a double-acting industrial component featuring a 12 mm piston diameter, an adjustable stroke ranging from 1 mm to 200 mm, and a square piston rod providing protection against torsion and guidance. Designed with elastic cushioning rings at both ends, a through piston rod, and provisions for position sensing via proximity sensors, it operates on compressed air within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar). It delivers a theoretical force of 51 N during both advancing and retracting strokes at 6 bar and functions in ambient temperatures from -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 156302 is a single-acting industrial component featuring a 20 mm piston diameter, an adjustable stroke ranging from 1 to 25 mm, and a male thread piston-rod end with variants for a through piston rod and heat-resistant seals up to 120°C. Operating on compressed air per ISO8573-1:2010 [7:4:4] within a pressure range of 0.12 to 1 MPa (17.4 to 145 psi), this unit delivers a theoretical advance force of 123 N at 0.6 MPa using flexible cushioning rings at both ends. It supports any assembly position, includes position detection for proximity sensors, and achieves a moderate corrosion resistance classification of CRC 2. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 153316 is a mini straight industrial component featuring a 3.1 mm nominal width, an R1/8 external thread pneumatic connection 1, and a push-pull structural design with an 11.5 mm tubing insertion depth and a coated screwed plug seal. This part operates with compressed air per ISO 8573-1:2010 [7:-:-] across an operating pressure of -0.095 MPa to 0.6 MPa and a temperature-dependent operating pressure up to 1.4 MPa within an ambient temperature range of -10 °C to 80 °C. Weighing 6.2 g with a corrosion resistance class of 1 and VDMA24364-B1/B2-L LABS conformity, it mounts in any position using an internal hexagon AF 3 at a nominal tightening torque of 7 Nm with a ±20% tolerance, and is supplied in a pack size of 10. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 153799 is a standard industrial component featuring a 3 mm nominal size, 1 supply line, and 4 outputs with ports for 3/16" and 5/32" outside diameter tubing. Constructed with a nickel-plated brass threaded plug and a grey release ring utilizing the push/pull design structure, this part operates on compressed air meeting ISO8573-1:2010 [7:-:-] across a pressure range of -0.95 to 10 bar and ambient temperatures from -10 to 60 °C. It supports lubricated operation, has an assembly position of any, features a coated screw-in stud seal with a maximum tightening torque of 8 Nm, carries a CRC 1 corrosion resistance classification, and weighs 20 g in a container size of 1 with RoHS-conforming materials and maritime classification per certificate. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156301 single-acting industrial component features a 16 mm piston diameter and an adjustable stroke from 1 to 25 mm with flexible cushioning rings at both ends. Designed with a male thread piston-rod end, through piston rod variant, and heat-resistant seals rated up to 120 °C, this unit operates within a pressure range of 0.13 to 1 MPa using compressed air conforming to ISO8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156149 is a double-acting industrial component featuring a 100 mm piston diameter, an adjustable stroke ranging from 1 mm to 400 mm, and a square piston rod at one end that provides protection against torsion and guidance. Engineered with elastic cushioning rings at both ends, this unit handles an operating pressure of 1 bar to 10 bar (14.5 psi to 145 psi) and delivers a theoretical force of 4712 N advancing and 4418 N retracting at 6 bar. It operates within an ambient temperature range of -20 °C to 80 °C using compressed air per ISO 8573-1:2010 [7:4:4], accommodates oil lubrication, and incorporates position sensing for proximity sensors alongside a CRC 2 moderate corrosion resistance rating. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 153315 is a mini straight industrial component featuring a 2.5 mm nominal width, an 11.5 mm tubing insertion depth, and a push-pull structural design with a sealing ring on the screwed plug. Operating on compressed air according to ISO 8573-1:2010 [7:-:-], this 3 g component handles a temperature-dependent operating pressure from -0.95 bar to 14 bar and functions within an ambient temperature range of -10 °C to 80 °C. Delivered in a pack size of 10, it features a nominal tightening torque of 1.33 Nm with a ±20% tolerance, a CRC rating of 1 for low corrosion stress, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 153798 is an L-shaped, dual, parallel industrial component featuring a 10 mm nominal width, 23.7 mm tubing insertion depth, and one external thread 1/2 NPT pneumatic connection 1. Operating via the push-pull principle, this part supports compressed air media according to ISO 8573-1:2010 [7:-:-] within a pressure range of -0.095 MPa to 1 MPa and temperatures from -10 °C to 60 °C. The unit weighs 108 g, incorporates a hollow bolt with external hex mounting, and features a coated seal on the screwed plug with a CRC rating of 1 for low corrosion stress. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 1563005 is an industrial component featuring an IP65 protection class, insulation protection class F, and a corrosion resistance classification of CRC 2 for moderate corrosion stress. Operating at a nominal voltage DC of 565 V with star-inside winding, this unit delivers a standstill torque of 10.93 Nm, a nominal torque of 6.29 Nm, and utilizes a DIN 6885 A 6 x 6 x 32 featherkey shaft design alongside PTC resistor temperature monitoring. It conforms to IEC 60034 standards, carries RCM and c UL us authorizations, and complies with EU-EMV and low voltage guidelines while maintaining RoHS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156148 is a double-acting industrial component featuring an 80 mm piston diameter, an adjustable stroke ranging from 1 mm to 400 mm, and a square piston rod at one end providing anti-torsion guidance. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) and an ambient temperature span of -20 °C to 80 °C, this unit utilizes elastic cushioning rings at both ends and incorporates position sensing for proximity sensors. It delivers a theoretical force of 3016 N advancing and 2827 N retracting at 6 bar, with a moving mass of 307 g at 0 mm stroke, and achieves moderate corrosion resistance under CRC 2 conditions using compressed air per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
This Festo miniature industrial component, part number 153314, features a straight design with an M3 external thread and a 1.5 mm nominal width utilizing the push-pull principle with an 11.5 mm tubing insertion depth. Rated for an operating pressure of -0.095 MPa to 0.6 MPa across its full temperature range and up to 1.4 MPa under temperature-dependent conditions, it operates on compressed air per ISO 8573-1:2010 [7:-:-] with a sealing ring on the screwed plug. The 2.2 g unit is mounted via an internal hex AF1.5 at a nominal tightening torque of 0.48 Nm with a ±55% tolerance, accommodating an ambient temperature range of -10 °C to 80 °C and lubricated operation. Submit the exact part number, quantity, and application requirements to request a quote for this pack size of 10.
View product details →
Festo
The Festo 153797 is a standard L-shape dual parallel industrial component featuring an 8 mm nominal width, a 20.2 mm tubing insertion depth, one 3/8 NPT external thread supply line, and two outlets secured via a hollow bolt with an external hex. Designed with a push-pull principle, a coated screwed plug seal, and any mounting position, it operates within a pressure range of -0.095 MPa to 1 MPa (-0.95 bar to 10 bar | -13.775 psi to 145 psi) and an ambient temperature of -10 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:-:-]. This 69.5 g unit accommodates lubricated operation, exhibits a corrosion resistance class of 1 with VDMA24364-B1/B2-L LABS conformity, and features maritime classification detailed in the certificate. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 1563004, features an IP65 protection class, insulation protection class F, and a CRC of 2 for moderate corrosion stress. Operating with 6 pole pairs, a 565 V DC nominal voltage, and a star inside winding switch, this unit delivers a 10.93 Nm standstill torque and a 6.29 Nm nominal torque. It conforms to IEC 60034 standards with an S1 rating class according to EN 60034-1, integrating a PTC resistor for temperature monitoring alongside a DIN 6885 A 6 x 6 x 32 featherkey shaft design. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 156147 is a double-acting industrial component featuring a 63 mm piston diameter, an adjustable stroke ranging from 1 mm to 300 mm, and a square piston rod at one end providing protection against torsion. Operating within a pressure range of 1 bar to 10 bar (0.1 MPa to 1 MPa or 14.5 psi to 145 psi) on compressed air as per ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical force of 1870 N advancing and 1750 N retracting at 6 bar. It incorporates elastic cushioning rings at both ends, position sensing for proximity sensors, a moderate corrosion resistance class (CRC 2), and functions across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo part number 153313 is a mini straight industrial component featuring an M5 external thread pneumatic connection 1, a 1.9 mm nominal width, and an 11.5 mm tubing insertion depth utilizing a push-pull structural design with a sealing ring on the screwed plug. Operating within an ambient temperature range of -10 °C to 80 °C, this 3.2 g unit handles compressed air per ISO 8573-1:2010 [7:-:-] with lubricated operation possible, an operating pressure of -0.095 MPa to 0.6 MPa across the entire temperature range, and a temperature-dependent operating pressure from -0.095 MPa to 1.4 MPa. It offers a corrosion resistance class of 1, VDMA24364-B1/B2-L LABS conformity, any mounting position, an internal hexagon AF 2 type of mounting, and a nominal tightening torque of 1.2 Nm with a ±20% tolerance, supplied in a pack size of 10. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 1563003 is an industrial component featuring a standstill torque of 10.93 Nm, a nominal torque of 6.29 Nm, and a nominal operating voltage of 565 V DC with 6 pole pairs. Constructed with an IP65 protection class, insulation class F, and a DIN 6885 A 6 x 6 x 32 featherkey shaft design, it operates within an ambient temperature range of -10 to 40 °C and conforms to IEC 60034 standards. This RoHS-compliant unit includes PTC resistor temperature monitoring, features a plug electrical connector system, and carries c UL us recognized and RCM mark authorizations while adhering to EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 153796 is a standard industrial component featuring an L-shape, dual, parallel design with one supply line and two outlets utilizing the push-pull principle. It connects via an external thread 1/4 NPT pneumatic connection and a hollow bolt with external hex for mounting in any position, operating across a pressure range of -13.775 psi to 145 psi with compressed air as per ISO 8573-1:2010 [7:-:-]. This unit has a nominal width of 6 mm, a tubing insertion depth of 18.1 mm, a coated screwed plug seal, a product weight of 44 g, and an ambient temperature range of -10 °C to 60 °C with lubricated operation possible. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1563002 is an industrial component featuring a standstill torque of 10.93 Nm, a nominal torque of 6.29 Nm, and a nominal operating voltage of 565 V DC with a star inside winding switch type. Conforming to IEC 60034 with an IP65 protection class and insulation class F, this unit operates in ambient temperatures from -10 to 40 °C and includes PTC resistor temperature monitoring. It incorporates a DIN 6885 A 6 x 6 x 32 featherkey shaft design, is RoHS compliant with a CRC 2 moderate corrosion resistance rating, and carries RCM Mark and c UL us Recognized authorizations alongside CE conformity to EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →