Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8153667 is a directly actuated 3-way proportional pressure control valve featuring a mechanical spring reset and soft NBR sealing with a total leakage of 1 l/h. Measuring 18 mm by 67 mm by 66 mm, this component operates within an ambient temperature range of 0 °C to 50 °C and accepts flange connections for pneumatic ports 1, 2, and 3 with an inlet pressure up to 6.5 bar and an output pressure ranging from 3 kPa to 600 kPa. It supports mounting in any position through either a through-hole or compatible accessories. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
Engineered by Festo with part number 8157269, this industrial component weighs 2472 g and supports any mounting position. It features motor in interface codes 190A and 190B, a coupling housing interface code of 95A, and RoHS-compliant materials alongside VDMA24364-B2-L LABS conformity. The unit operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8148787 is a double-acting industrial component featuring a 16 mm piston diameter, an adjustable stroke ranging from 1 mm to 200 mm, and elastic cushioning rings or pads at both ends combined with self-adjusting pneumatic end-position cushioning. Operating within a pressure range of 0.08 MPa to 1 MPa (0.8 bar to 10 bar) on compressed air as per ISO 8573-1:2010 [7:4:4], this unit delivers a theoretical force of 103.7 N retracting and 120.6 N advancing at 6 bar. Built with position sensing via proximity switch, an ambient temperature range of -20 °C to 80 °C, and a corrosion resistance class of CRC 0, it achieves ISO 14644-1 Class 5 cleanroom suitability and VDMA24364-B2-L LABS conformity with reduced Cu/Zn/Ni values for battery production. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo industrial component, designated by part number 8157268, features a product weight of 1194 g and conforms to VDMA24364-B2-L LABS (PWIS) standards with RoHS-compliant materials. It incorporates a motor-in interface code of 140A or 150A alongside a coupling housing interface code of 95A, supporting any mounting position within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 8148324 is an industrial component conforming to standard IEC 60034 featuring thermal class F according to EN 60034-1, an S1 rating class, and digital motor temperature transmission via EnDat 2.2. It operates within an ambient temperature range of -15 °C to 40 °C, up to 80 °C with a derating of -1.5% per degree Celsius, a maximum installation height of 4000 m, and includes IP21 protection for the motor shaft without a rotary shaft seal, IP65 with a seal, and IP67 for the housing including connection technology. The unit supports IM B5, IM V1, and IM V3 motor types per EN 60034-7 in any mounting position, offering a 20000-hour bearing lifetime under nominal conditions and a detent torque under 1.0% of peak torque. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8153646 is a directly actuated 3-way proportional pressure control valve featuring a mechanical spring reset and soft NBR seals. Measuring 15 mm by 54.5 mm by 85 mm with QS-4 pneumatic connections for ports 1, 2, and 3, this unit supports any mounting position via a through-hole or accessories. It operates with an inlet pressure range of 0 bar to 11 bar (0 MPa to 1.1 MPa / 0 psi to 159.5 psi) and regulates an output pressure range of 0.03 bar to 6 bar (0.003 MPa to 0.6 MPa / 0.435 psi to 87 psi) within a medium temperature range of 5 °C to 50 °C, an ambient temperature range of 0 °C to 50 °C, and a storage temperature range of -20 °C to 70 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
Engineered as a double-acting industrial component, this Festo part features a 12 mm piston diameter with a variable stroke of 1 mm to 150 mm and elastic cushioning rings or pads at both ends. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a 1.5 bar to 10 bar pressure range, it delivers a theoretical force of 67.9 N advancing and 50.9 N retracting at 6 bar. The unit meets ISO 14644-1 Class 5 cleanroom standards, features VDMA24364-B2-L LABS conformity, and includes position sensing via proximity switch across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive an official price and lead-time quotation.
View product details →
Festo
The Festo 8156763 is an electrically actuated industrial component featuring Class H insulation and a 100% duty cycle, operating on 60 V AC at 40/65 Hz with a power of 1.8 VA or 60 V DC at 1.8 W with permissible voltage fluctuations of -15% / +10%. Weighing 330 g with an IP65 degree of protection, it includes an M20x1.5 cable entry terminal box, allows any mounting position, and possesses Ex e mb IIC gas and Ex tD A21 dust explosion protection certifications for Zone 1 and Zone 21 hazardous locations. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo double-acting industrial component features an 8 mm piston diameter, an adjustable stroke ranging from 1 mm to 100 mm, and elastic cushioning rings or pads at both ends with an impact energy of 0.03 J in the end positions. Operating within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) using compressed air as per ISO 8573-1:2010 [7:4:4], the unit delivers a theoretical force at 6 bar of 30.2 N advancing and 22.6 N retracting. Designed with a moving mass of 6.3 g at 0 mm stroke, it achieves ISO 14644-1 Class 5 cleanroom suitability and VDMA24364-B2-L LABS conformity for battery production applications with reduced copper, zinc, and nickel values. Please submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8153645 is a 3-way proportional pressure control valve featuring direct electrical actuation and a mechanical spring reset. Measuring 15 mm by 54.5 mm by 85 mm with QS-4 pneumatic connections for ports 1, 2, and 3, this component operates within an ambient temperature range of 0 °C to 50 °C and utilizes soft NBR seals. It supports an inlet pressure from 0 bar to 11 bar (0 MPa to 1.1 MPa) and regulates an outlet pressure ranging from 0.01 bar to 2 bar (0.001 MPa to 0.2 MPa). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo industrial component, part number 8148323, is built in accordance with IEC 60034 standards featuring thermal class F and rating class S1 per EN 60034-1, along with digital motor temperature transmission via EnDat 2.2. Designed with IM B5, IM V1, and IM V3 motor types and a balancing quality of G 2.5, it provides any mounting position, an IP21 to IP67 degree of protection depending on the shaft seal configuration, and a nominal bearing lifetime of 20,000 hours. Operating conditions include an ambient temperature range of -15 °C to 40 °C, maximum installation height up to 4000 m, and relative air humidity from 0 to 90%. Submit the exact part number, quantity, and application requirements to request a quote for this part.
View product details →
Festo
The Festo part number 8156762 is an electrical industrial component weighing 330 g with an IP65 degree of protection, featuring an M20x1.5 cable entry thread terminal box and Class H insulation. It operates on a 100% duty cycle with coil characteristics of 24 V DC at 1.8 W and 24 V AC at 40/65 Hz with a power of 1.8 VA, accommodating permissible voltage fluctuations of -15% / +10% and internal fuse protection. Designed for any mounting position with RoHS-compliant materials and VDMA24364 Zone III LABS conformity, it includes explosion protection certifications EPL Db (KR) and EPL Gb (KR) for Zone 1 and Zone 21 (KR) hazardous areas under certificate authorities 21-AV4BO-0279X and 22-AV4BO-0051X, specifying Ex e mb IIC T4, T5, T6 gas ignition protection and Ex tD A21 IP65 T85/T95/T130°C dust ignition protection across defined explosive ambient temperature ranges. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8148413 is an industrial component conforming to IEC 60034 with an EnDat 2.2 digital motor temperature transmission and thermal class F according to EN 60034-1. It operates at an ambient temperature range of -15 °C to 40 °C, extendable up to 80 °C with a derating of -1.5% per degree Celsius, and functions at a maximum installation height of 4000 m. Featuring an IP21 degree of protection for the motor shaft without a rotary shaft seal, IP65 with a rotary shaft seal, and IP67 for the motor housing including connection technology, this unit supports any mounting position and utilizes a featherkey shaft design per DIN 6885 A 10 x 8 x 45. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8153644 is a directly actuated 3-way proportional pressure control valve featuring a mechanical spring reset and soft NBR seals. Measuring 15 mm by 61 mm by 66 mm with flanged pneumatic connections 1, 2, and 3, this component supports any mounting position via through-holes or optional accessories. It operates with an inlet pressure range of 0 MPa to 1.1 MPa (0 bar to 11 bar, 0 psi to 159.5 psi) and regulates an output pressure of 0.005 MPa to 1 MPa (0.05 bar to 10 bar, 0.725 psi to 145 psi) across an ambient and medium temperature range of 0 °C to 50 °C and 5 °C to 50 °C respectively, while enduring storage temperatures from -20 °C to 70 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 8156761 is an electrical industrial component weighing 330 g with an any mounting position and a 100% duty cycle. Featuring Class H insulation and a terminal box with an M20x1.5 cable entry thread, it operates on 230 V DC at 1.8 W or 230 V AC at 40/65 Hz with a power of 1.8 VA, accommodating permissible voltage fluctuations of -15% / +10%. Certified for explosion protection outside the EU including EPL Db (KR) and EPL Gb (KR) for Zone 1 (KR) and Zone 21 (KR), it provides ignition protection types Ex e mb IIC T4, T5, T6 for gas and Ex tD A21 IP65 T85/T95/T130°C for dust across specified explosive ambient temperatures, while offering IP65 protection, VDMA24364 Zone III LABS conformity, and RoHS compliant materials without switching position indication. Request a quote today by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
Engineered for precise motion control applications, the Festo industrial component part number 8148322 operates within an ambient temperature range of -15 °C to 40 °C, extendable up to 80 °C with a derating of -1.5% per degree Celsius. This unit complies with IEC 60034 standards, features Thermal Class F according to EN 60034-1 with a maximum winding temperature of 155 °C, and provides digital motor temperature transmission via EnDat® 2.2. Offering flexible installation with any mounting position and IM B5, IM V1, or IM V3 motor types, it delivers an IP21 protection degree for the motor shaft without a rotary shaft seal, which increases to IP65 with the seal and IP67 for the housing including connection technology. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8156760 is an electrical industrial component weighing 330 g and featuring an IP65 degree of protection, allowing mounting in any position with a 100% duty cycle and class H insulation. Its coil characteristics accommodate 110 V DC at 1.8 W and 110 V AC at 40/65 Hz with 1.8 VA, operating within permissible voltage fluctuations of -15% / +10% through a terminal box with an M20x1.5 cable entry thread. Certified for explosion protection outside the EU with EPL Db (KR) and EPL Gb (KR) ratings, it provides ignition protection for gas as Ex e mb IIC T4, T5, T6 and for dust as Ex tD A21 IP65 T85/T95/T130°C within specified explosive ambient temperature ranges, adhering to VDMA24364 Zone III LABS conformity and RoHS material directives. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8153643 is a directly actuated, 3-way proportional pressure control valve featuring a mechanical spring reset and soft NBR seals. Measuring 15 mm by 61 mm by 66 mm, this component supports flange connections for ports 1, 2, and 3, and can be mounted in any position using a through-hole or accessories. It operates with an inlet pressure range of 0 MPa to 1.1 MPa (0 bar to 11 bar, 0 psi to 159.5 psi) and delivers an output pressure of 0.003 MPa to 0.6 MPa (0.03 bar to 6 bar, 0.435 psi to 87 psi) across an ambient temperature range of 0 °C to 50 °C. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo part number 8148412 is an industrial component adhering to IEC 60034 standards, featuring thermal class F per EN 60034-1, an S1 rating class, and digital motor temperature transmission via EnDat 2.2. Configured for any mounting position with motor types IM B5, IM V1, and IM V3 as per EN 60034-7, it delivers a maximum winding temperature of 155 °C and balancing quality G 2.5 with a detent torque under 1.0% of peak torque. The housing provides IP67 protection including connection technology, while the motor shaft offers IP21 without a rotary shaft seal or IP65 with one. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
This Festo industrial component, part number 8148321, conforms to the IEC 60034 standard and features Thermal Class F with a maximum winding temperature of 155 °C and S1 rating class according to EN 60034-1. It operates within an ambient temperature range of -15 °C to 40 °C, which extends up to 80 °C with a derating of -1.5% per degree Celsius, and supports installation heights up to 4000 m. The unit utilizes digital motor temperature transmission via EnDat 2.2, offers IM B5, IM V1, and IM V3 motor types per EN 60034-7, and provides an IP67 degree of protection for the motor housing including connection technology. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →