Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 12618 is an electrical 5/2-way monostable industrial component featuring a plate seat structural design and a nominal width of 7 mm. This piloted valve operates across a pressure range of 0 bar to 8 bar, delivers a normal nominal flow rate of 1000 l/min through 1/4 NPT pneumatic working ports, and utilizes an IP65 degree of protection with an adjustable exhaust air function. Operating voltage is supplied via a solenoid coil ordered separately, and the unit includes a detenting manual override, mechanical spring reset, and external pilot air supply. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 1210036 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and a maximum working pressure of <= 8 bar, this unit operates with compressed air according to ISO 8573-1:2010 [7:4:4] in any assembly position. Certified for hazardous environments with ATEX category Gas II 2G and Dust II 2D ratings within an ambient temperature range of -20°C to +80°C, it includes a NAMUR-standard valve connection and supports up to SIL 3 Low Demand mode. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 1210035 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle without cushioning or position detection. Built with a valve connection based on VDI/VDE 3845 (NAMUR), it operates at a nominal working pressure of 5.6 bar and a maximum working pressure of 8 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4], while supporting lubricated operation if subsequently required. This unit offers ATEX certification for Gas (II 2G c T4 X) and Dust (II 2D c 125°C X) with an explosion-proof ambient temperature range of -20°C to +80°C and achieves Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode in any assembly position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 12617 is an electrical, 5/2-way monostable industrial component featuring a plate seat structural design and a 26 mm width. This piloted valve operates across a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) with a normal nominal flow rate of 500 l/min and incorporates an external pilot air supply port alongside an adjustable exhaust air function. Certified as c UL us - recognized (OL) with an IP65 degree of protection, it utilizes soft sealing and requires a solenoid coil ordered separately for its operating voltage. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1210034 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit accommodates compressed air media meeting ISO8573-1:2010 [7:4:4] standards and supports lubricated operation. It includes a VDI/VDE 3845 NAMUR-compliant valve connection, features ATEX category II 2G and II 2D gas and dust explosion protection for ambient temperatures between -20°C and 80°C, and provides Safety Integrity Level up to SIL 3 in Low Demand mode without position detection. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 12612 is an industrial component featuring a round, standard suction cup with an 8 mm diameter, a 5.5 mm effective suction diameter, and a 2 mm nominal size. Constructed with a TPE-U(PU) transparent suction cup of 60 +/- 5 Shore hardness and a brass screw-in stud, this assembly utilizes an M5 mounting thread, M5 suction cup mounting, and a PK-3 side vacuum connection. It operates with atmospheric air based on ISO 8573-1:2010 [7:-:-] within an ambient temperature range of -20 to 60 °C, delivering a breakaway force and retention force of 1.6 N at 70% vacuum and nominal operating pressure. The materials conform to RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 1209006, features a holder 1 diameter of 38 mm and a holder 2 diameter of 80 mm with actuator interface code M80 and coupling housing interface code 80A. Weighing 23 g and compliant with RoHS materials standards, it conforms to VDMA24364-B2-L LABS (PWIS) requirements and can be installed in any mounting position. The part operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 12611 is an industrial component manufactured with a reinforced PA6 housing and a product weight of 13 g. This device features a Type A plug electrical connection as per DIN EN 175301-803, operating on a nominal voltage of 24 V DC or 24 V AC within a mains frequency range of 0 Hz to 60 Hz and permissible voltage fluctuations of +/-15%. It achieves an IP65 degree of protection according to IEC 60529, operates in ambient temperatures from -20 °C to 60 °C, and conforms to VDMA24364-B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 1208961 is a single-acting rack and pinion industrial component featuring a size 15 actuator, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit is rated for use in ATEX category II 2G and II 2D hazardous environments within an ambient temperature range of -20°C to 80°C. It connects via a NAMUR standard valve connection and utilizes compressed air in accordance with ISO 8573-1:2010 [7:4:4], supporting lubricated operation and achieving safety integrity levels up to SIL 3 in low demand mode. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 12610 is an industrial component weighing 14 g with a reinforced PA6 housing material. It features a Form B electrical connection in accordance with the 11 mm industry standard, operating at a nominal voltage of 24 V DC and 24 V AC across a mains frequency of 0 Hz to 60 Hz with permissible voltage fluctuations of +/-15%. This component provides an IP65 degree of protection as per IEC 60529, functions within an ambient temperature range of -20 °C to 60 °C, and maintains VDMA24364-B2-L LABS (PWIS) conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 1208960 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar with a maximum working pressure of 8 bar, this unit accommodates any assembly position and utilizes compressed air matching ISO 8573-1:2010 [7:4:4] standards with lubricated operation possible. Certified for hazardous locations, it meets ATEX category II 2G for gas and II 2D for dust, supports Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode, and functions within an ambient temperature range of -20°C to 80°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 12595 industrial component functions as a pneumatic/electric pressure transducer measuring relative pressure within an operating pressure range of -0.095 MPa to 0 MPa and accepting compressed air media conforming to ISO 8573-1:2010 [7:4:4] at temperatures from 0 °C to 60 °C. Operating on AC and DC voltage ranges of 12 V to 250 V with a contact-based switching output featuring a changeover switch element function, this unit provides a fixed hysteresis threshold value with a switch-on point of -0.25 bar, a switch-off point of 0.1 bar, and a maximum switching frequency of 1 Hz under a minimum load current of 100 mA. Built to conform to EN 60947-5-1 standards, the device carries CE marking per the EU low voltage directive and UKCA marking per UK electrical equipment instructions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1208959 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and a maximum working pressure of <= 8 bar, this device accommodates compressed air conforming to ISO 8573-1:2010 [7:4:4] in any assembly position. It includes a NAMUR-standard valve connection based on VDI/VDE 3845, achieves Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode, and carries ATEX certifications for explosive atmospheres within an ambient temperature range of -20°C to +80°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 1259496 is a size 50 double-acting pneumatic industrial component featuring a 3-point gripper function with three jaws and a 6 mm stroke per jaw. Operating at a pressure range of 4 bar to 8 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4], it achieves a repetition accuracy of 0.04 mm, a max operating frequency of 4 Hz, and a gripping force backup during closing. Position sensing is accomplished via proximity switch, supporting any mounting position and a structural lever design with positively driven motion sequence. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1208958 is a single-acting rack and pinion industrial component featuring an actuator size of 15, an F04 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at a nominal pressure of 5.6 bar and working pressures up to 8 bar, this unit includes a NAMUR-standard valve connection, SIL 3 Low Demand mode safety integration, and ATEX certification for explosive gas and dust environments ranging from -20°C to +80°C. It functions in any assembly position using compressed air matching ISO8573-1:2010 [7:4:4] standards, with lubricated operation supported if maintained for subsequent cycles. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo size 10 single-acting industrial component features a rack and pinion design structure with an F04 flange hole pattern and a 90-degree swivel angle without cushioning. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] at a nominal working pressure of 5.6 bar and maximum 8 bar, this ATEX-certified unit (II 2G c T4 X and II 2D c 125°C X) functions within an ambient temperature range of -20°C to 80°C and supports SIL 3 Low Demand mode safety integration. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 1259495 is a double-acting industrial component featuring a 3-point gripper function with three gripper jaws, a size 50 designation, and a stroke of 6 mm per gripper jaw. Operating at pressures from 2 bar to 8 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4], this positively driven lever-designed pneumatic gripper achieves a repetition accuracy of 0.04 mm, a maximum operating frequency of 4 Hz, and gripping forces up to 840 N opening and 750 N closing at 6 bar. Position sensing is accomplished via a proximity switch, while structural tolerances include a maximum interchangeability of 0.2 mm, rotational symmetry of 0.2 mm, jaw angular play of 0.2 degrees, and jaw backlash of 0.02 mm. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1207666 is a size 10 single-acting rack and pinion industrial component featuring an F04 flange hole pattern and a 90-degree swivel angle without cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit supports compressed air per ISO 8573-1:2010 [7:4:4] with optional lubricated operation in any assembly position. Certified for hazardous locations under ATEX category II 2G for gas and II 2D for dust within an ambient temperature range of -20°C to +80°C, it includes a NAMUR-standard valve connection and achieves SIL 3 Low Demand mode safety integrity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1259494 is a double-acting 3-point pneumatic gripper featuring a size 32 design with a stroke of 3.9 mm per gripper jaw and a gripping force backup during closing. Constructed with a lever structural design and positively driven motion sequence, this component operates within a pressure range of 4 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4] and achieves a maximum operating frequency of 4 Hz with position sensing via a proximity switch. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo size 10 single-acting rack and pinion industrial component features an F04 flange hole pattern and a 90-degree swivel angle without cushioning, operating at a nominal working pressure of 5.6 bar and a maximum working pressure of ≤ 8 bar. Certified for hazardous locations, it carries ATEX category II 2G and II 2D ratings with explosion ignition protection types c T4 X and c 125°C X across an ambient temperature range of -20°C to +80°C, supporting SIL 3 Low Demand mode safety integrity levels. This unit operates on compressed air meeting ISO 8573-1:2010 [7:4:4] standards with NAMUR-based valve connections in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →