Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 8116843 is a pneumatic industrial component featuring two parallel gripper jaws with a size of 20 and a stroke per jaw of 9 mm. This single-acting, open-mode lever gripper operates at pressures ranging from 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi) with a ball guide, zero angular play, and a repetition accuracy of 0.02 mm. It supports position sensing via proximity switch, flat mounting for gripper fingers, lateral connection direction, and a gripping force backup on opening. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8120899 is a size 44 Series P filter regulator featuring a structural design without a pressure gauge and an actuator lock consisting of a regulating screw with a locknut. It provides a pressure regulation range of 0.5 bar to 12 bar within an operating pressure of 1 bar to 20 bar, supporting a maximum standard flow rate of 2020 l/min and a normal nominal flow rate of 1750 l/min. Conforming to NACE MR0175/ISO 15156 for its housing and bowl, this component includes a 40 µm filtration grade, a manual rotating condensate drain with a 13 cm³ max condensate volume, and ATEX certification for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8126791 is an electrical 3/2-way closed monostable industrial component featuring a 10 mm valve size, M7 pneumatic working ports, and a soft sealing principle with a negative overlap lap. Engineered with a poppet valve structural design, mechanical spring reset, and external pilot air supply port, this 24V DC unit operates between 3 bar and 8 bar (0.3 MPa to 0.8 MPa) with IP65 protection in the mounted state and includes a signal status display and both detenting and non-detenting manual override. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 8118871 is a double-acting industrial component featuring a 25 mm piston diameter, a 30 mm stroke, and a yoke drive unit operating mode with an elastic cushioning ring or pad at both ends. Guided by a recirculating ball bearing, this guide structural design operates on compressed air within an operating pressure range of 0.15 MPa to 1 MPa and achieves a maximum speed of 0.8 m/s. It includes position sensing via a proximity switch, supports any mounting position, and maintains a distance of the center of gravity of the payload to the yoke plate xs of 50 mm. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8116842 is a size 20 pneumatic parallel gripper featuring two jaws with a stroke of 9 mm per jaw and a ball guide. It operates in a single-acting, open mode with a gripping force backup on opening, supporting an operating pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi). This component achieves a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, and position sensing via a proximity switch, with a maximum operating frequency of 3 Hz. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 8120898 is a size 44 Series P filter regulator featuring a structural design without a pressure gauge, a regulating screw with locknut actuator lock, and a manual rotating condensate drain with a 13 cm³ max volume. It operates across an input pressure range of 1 bar to 20 bar with a 0.5 bar to 12 bar regulation range, delivering a max standard flow rate of 2020 l/min using compressed air per ISO 8573-1:2010 [-:4:-] or inert gases. Certified for ATEX Zones 1, 2, 21, and 22, the housing and bowl conform to NACE MR0175/ISO 15156 standards while supporting vertical ±5° mounting and 40 µm filtration. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8126790 is a 10 mm electrical industrial component featuring a 3/2-way closed, monostable poppet valve design with a mechanical spring reset and soft sealing principle. Operating at 24V DC with an internal pilot air supply port, this piloted unit functions across an operating and pilot pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar) with a non-reversible flow direction and negative overlap. It provides IP65 protection in the mounted state as per IEC 60529, includes a signal status display, features detenting and non-detenting manual override, and supports any mounting position without vacuum suitability. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
The Festo part number 8118870 is a double-acting industrial guide drive unit featuring a 25 mm piston diameter, a 25 mm stroke, and a recirculating ball bearing guide. Operating with compressed air as per ISO 8573-1:2010 [7:4:4] within a pressure range of 0.15 MPa to 1 MPa, this component achieves a maximum speed of 0.8 m/s and incorporates elastic cushioning rings or pads at both ends. Designed with a yoke drive operating mode and a 50 mm distance from the centre of gravity of the payload to the yoke plate xs, the unit offers position sensing via proximity switch and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) and ISO Class 6 cleanrooms. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116841 is a pneumatic industrial component featuring a size 20 parallel gripper with two jaws and a stroke of 9 mm per jaw. This single-acting, open-mode pneumatic gripper utilizes a ball guide with zero angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and an operating frequency up to 3 Hz within a pressure range of 2.5 bar to 8 bar. Position sensing is enabled via proximity switch, supporting any mounting position with a gripping force backup on opening. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8120897 is a size 44 Series P filter regulator featuring a regulating screw with locknut actuator lock, a manual rotating condensate drain with a maximum condensate volume of 13 cm³, and a 40 µm filtration grade for compressed air per ISO 8573-1:2010 [-:4:-] or inert gases. Operating within a pressure range of 1 bar to 20 bar and a regulation range of 0.5 bar to 12 bar, this unit delivers a maximum standard flow rate of 2020 l/min and a normal nominal flow rate of 1750 l/min, while conforming to NACE MR0175/ISO 15156 housing and bowl standards and supporting ATEX Zone 1, 2, 21, and 22 explosion protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
Engineered by Festo, part number 8118869 is a double-acting industrial guide drive unit featuring a 25 mm piston diameter, a 20 mm stroke, and a yoke drive operating mode with a recirculating ball bearing guide. This component operates on compressed air within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) and achieves a maximum speed of 0.8 m/s, utilizing elastic cushioning rings or pads at both ends. It supports position sensing via proximity switch, allows operation with oil lubrication, and meets ISO 14644-1 cleanroom Class 6 standards alongside VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8126788 is a 14 mm electrical 3/2-way closed monostable industrial component featuring a poppet valve structural design with mechanical spring reset and soft sealing principle. This piloted valve operates on 24V DC with an operating pressure and external pilot pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar) through G1/8 pneumatic working ports. It incorporates a non-reversible flow direction, negative overlap lap, signal status display, and both detenting and non-detenting manual override capabilities while achieving an IP65 degree of protection in the mounted state according to IEC 60529. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo size 44 Series P filter regulator operates with compressed air per ISO 8573-1:2010 [-:4:-] or inert gases within a 1 bar to 20 bar range, featuring a 40 µm filtration grade and a pressure regulation range of 0.5 bar to 12 bar. This structural design includes a manual rotating condensate drain with a 13 cm³ max condensate volume, primary pressure compensation, secondary exhausting, and housing and bowl conforming to NACE MR0175/ISO 15156 standards. It achieves a maximum standard flow rate of 2020 l/min and supports ATEX explosion protection in Zones 1, 2, 21, and 22 when adhering to certificate guidelines. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8116840 is a double-acting pneumatic parallel gripper featuring two jaws with a size 20 designation and a 9 mm stroke per jaw. It utilizes a ball guide structural design with a lever mechanism and positively driven motion sequence, operating across a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi). Position sensing is accomplished via a proximity switch, achieving a repetition accuracy of 0.02 mm with zero gripper jaw backlash Sz, zero angular play, and a maximum operating frequency of 3 Hz. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
Engineered with a 25 mm piston diameter and a 100 mm stroke, this Festo double-acting drive unit features a yoke operating mode and a plain-bearing guide. The component operates on compressed air within a pressure range of 1.5 bar to 10 bar, utilizing elastic cushioning rings or pads at both ends and supporting speeds up to 0.8 m/s. Constructed with a center of gravity distance xs of 50 mm, it accommodates any mounting position and provides position sensing via proximity switch. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8126787 is a 3/2-way closed, monostable industrial component featuring electrical actuation and a 14 mm valve size with a G1/8 pneumatic working port. Designed with a soft sealing principle, negative overlap, and a poppet valve structural design utilizing a mechanical spring for reset, this piloted unit operates at 24V DC within a pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar). It incorporates internal pilot air supply, a signal status display, detenting and non-detenting manual override, and IP65 protection in the mounted state as per IEC 60529 for any mounting position with non-reversible flow and no vacuum suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8120125, features a size of 160 and a switch lug made of high-alloy steel with a product weight of 8 g. It supports any mounting position within an ambient temperature range of -10 °C to 80 °C, while meeting RoHS compliance and VDMA24364-B2-L LABS conformity with a CRC of 0 for no corrosion stress. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8116839 is a pneumatic industrial component featuring a size 20 parallel gripper function with two jaws and a double-acting mode of operation. This unit provides a 9 mm stroke per gripper jaw, a repetition accuracy of 0.02 mm, a ball guide structural design, and an operating pressure range of 1 bar to 8 bar. Position sensing is accomplished via a proximity switch, supporting a maximum operating frequency of 3 Hz and a minimum opening time of 110 ms at 6 bar in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a 25 mm piston diameter, an 80 mm stroke, and a yoke drive unit operating mode, this Festo industrial component utilizes a plain-bearing guide with elastic cushioning rings or pads at both ends. The double-acting unit operates on compressed air within a 0.15 MPa to 1 MPa pressure range, achieving a maximum speed of 0.8 m/s across an ambient temperature range of -20 °C to 80 °C. It features position sensing via proximity switch, offers ISO 14644-1 Class 6 cleanroom suitability, and complies with VDMA24364-B1/B2-L LABS conformity with reduced copper, zinc, and nickel values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8120124 is a size 120 industrial component featuring a high-alloy steel switch lug and RoHS compliant materials with a product weight of 9 g. Designed for any mounting position, this unit operates within an ambient temperature range of -10 °C to 80 °C and conforms to VDMA24364-B2-L LABS (PWIS) with a corrosion resistance class (CRC) of 0 for environments with no corrosion stress. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →