Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8112918 is a straight industrial component featuring a 3 mm nominal width and a push-pull structural design for pneumatic tubing with a 4 mm outside diameter and R1/4 external thread. It operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4], with lubricated operation possible across an ambient temperature range of -5 °C to 60 °C. This standard-sized unit weighs 15.2 g, includes a coated screwed plug seal, and incorporates an external hexagon SW14 and internal hexagon AF 3 for mounting in any position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8118281 is an electric cylinder featuring a size 45 structural design with a ball screw, integrated actuator, and plain bearing-guide for torsion protection. This unit delivers a 50 mm stroke with zero stroke reserve, an M10x1.25 piston rod thread, a 10 mm screw diameter, and a 10 mm/U spindle pitch for any mounting position. Operational parameters include a maximum acceleration of 5 m/s², a maximum speed of 0.23 m/s, a repetition accuracy of ±0.02 mm, and a 100% duty cycle, supported by an absolute single-turn magnetic encoder and a CMOS temperature sensor for overtemperature shutdown. Additional features encompass an integrated user interface, LED display, and configurable non-galvanically isolated digital logic outputs with integrated end-position sensing. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8113176 is a standard-sized blanking plug designed for 12 mm outside diameter pneumatic tubing, supplied in a pack size of 10 with a product weight of 9.03 g per unit. It operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar | -13.775 psi to 116 psi) and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4], with lubricated operation possible. Constructed with a PBT housing, POM blue releasing ring, NBR tubing seal, and stainless steel tube retaining claw, the component features corrosion resistance class 1, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability while meeting RoHS material standards and supporting any mounting position. Submit part number 8113176, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo EAHS-P1-40, part number 1434911 and GTIN 4052568232672, is an official swivel mounting component manufactured by Festo. This unit facilitates specific mechanical connection and pivoting requirements within industrial systems according to the designated manufacturer specifications. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8112917 is a standard straight industrial component featuring a 5 mm nominal width and a push-pull structural design for a 12 mm outside diameter pneumatic tubing connection with an R1/8 external thread. It operates across a pressure range of -0.095 MPa to 0.8 MPa with compressed air as per ISO 8573-1:2010 [7:4:4], supporting lubricated operation and an ambient temperature range of -5 °C to 60 °C. This pack of 10 components includes a coating on the screwed plug, an external hexagon SW21 and internal hexagon AF 5 mounting type, a blue releasing ring, and a product weight of 27.95 g with ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8116729 is a size 10 pneumatic parallel gripper featuring two jaws driven by a double-acting or single-acting mode of operation. This component incorporates a ball guide with zero gripper jaw angular play and zero backlash, achieving a pneumatic repetition accuracy of 0.02 mm and a stroke per jaw of 2 mm to 4 mm. Operating within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar / 29 psi to 116 psi), it supports a maximum operating frequency of 3 Hz and position sensing via a proximity switch. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113175 is a standard blanking plug designed for 10 mm outside diameter pneumatic tubing, supplied in a pack size of 10 with any mounting position. Constructed with a PBT housing, POM releasing ring, NBR tubing seal, and stainless steel tube retaining claw, this component operates across a temperature range of -5 °C to 60 °C and handles operating pressures from -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) with compressed air conforming to ISO 8573-1:2010 [7:4:4]. It features a blue releasing ring, weighs 6.42 g, offers CRC 1 corrosion resistance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and supports lubricated operation while complying with RoHS standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118280 is an electric cylinder featuring an integrated actuator, ball screw design with a 3 mm/U pitch, and a plain bearing-guide for torsion protection. This Size 45 component delivers a 300 mm stroke with zero stroke reserve, a 10 mm screw diameter, an M10x1.25 piston rod thread, a maximum speed of 0.074 m/s, a maximum acceleration of 1.5 m/s², and a repetition accuracy of ±0.02 mm at a 100% duty cycle in any mounting position. It includes an absolute single-turn magnetic rotor position sensor, a CMOS temperature sensor with analogue output for over-temperature shutdown, a user interface with an LED display, and configurable, non-galvanically isolated digital logic outputs with integrated end-position sensing. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8112916 is a standard straight industrial component featuring a 5 mm nominal width, a push-pull structural design, an external thread R1/8 pneumatic connection 1, and a pneumatic connection 2 for a 10 mm outside diameter tubing. This part operates across a pressure range of -0.095 MPa to 0.8 MPa with compressed air as per ISO 8573-1:2010 [7:4:4] and accommodates ambient temperatures from -5 °C to 60 °C. Each pack contains 10 units, with a product weight of 20.26 g per item, an external hexagon SW17 and internal hexagon AF 5 mounting type, a blue releasing ring, and a coating seal on the screwed plug. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo MUHX2-ZP-D-3-24G (34935) is an intermediate plate manufactured by Festo, identified by GTIN 4052568115562 and corresponding to the official product name MUHX2-ZP-D-3-24G (34935) intermediate plate of Festo. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this industrial component.
View product details →
Festo
The Festo part number 8113174 is a standard blanking plug supplied in a pack size of 10 featuring a PBT housing, POM releasing ring, NBR tubing seal, and stainless steel tube retaining claw with a blue releasing ring. Designed for pneumatic tubing with an outside diameter of 8 mm, this component operates within a temperature range of -5 °C to 60 °C and an operating pressure of -0.095 MPa to 0.8 MPa using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers any mounting position, lubricated operation capability, CRC 1 low corrosion stress, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, RoHS compliance, and a product weight of 3.71 g. Submit the exact part number, quantity, and application requirements to receive a quote for this item.
View product details →
Festo
The Festo part number 8116728 is a size 6 pneumatic parallel gripper featuring two jaws, a ball guide, and a 2 mm stroke per jaw. It operates via double-acting or single-acting modes with a 0.15 MPa to 0.8 MPa operating pressure range, achieving a repetition accuracy of 0.02 mm and a maximum operating frequency of 3 Hz. Position sensing is accomplished via a proximity switch, and the unit supports any mounting position with a maximum interchangeability of 0.2 mm. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo size 45 electric cylinder features a structural design incorporating a ball screw and an integrated actuator with a 250 mm stroke and 3 mm/U spindle pitch. This component includes a plain bearing-guide for torsion protection, an absolute single-turn magnetic rotor position sensor, and an integrated CMOS temperature sensor with analog output for overtemperature shutdown. Featuring a 100% duty cycle, M10x1.25 piston rod thread, 10 mm screw diameter, integrated end-position sensing, an LED display, a user interface, and configurable digital logic outputs, the unit delivers a max speed of 0.074 m/s, max acceleration of 1.5 m/s², and a repetition accuracy of ±0.02 mm in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8112915 is a straight industrial component featuring a nominal width of 5 mm and a push-pull structural design with a coating seal on the screwed plug. This pack size of 10 operates within a pressure range of -0.095 MPa to 0.8 MPa utilizing compressed air as per ISO 8573-1:2010 [7:4:4] and supports lubricated operation across an ambient temperature range of -5 °C to 60 °C. It is equipped with an external thread R1/8 pneumatic connection 1 and accommodates a pneumatic tubing outside diameter of 8 mm for connection 2, featuring external hexagon SW14 and internal hexagon AF 5 mounting with a blue releasing ring. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8113173 is a standard blanking plug designed for 6 mm outside diameter pneumatic tubing, supplied in a pack size of 10 with a blue releasing ring. Featuring a PBT housing, POM releasing ring, NBR tubing seal, and stainless steel tube retaining claw, this component operates within a temperature range of -5 °C to 60 °C and an operating pressure of -0.095 MPa to 0.8 MPa. It accommodates compressed air conforming to ISO 8573-1:2010 [7:4:4], allows lubricated operation, and complies with RoHS, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom standards with a CRC rating of 1. Submit the exact part number, quantity, and application requirements to request a quote for this 2.7 g component.
View product details →
Festo
The Festo 8116424 is a double-acting industrial guide drive unit featuring a 32 mm piston diameter, an adjustable stroke range from 101 mm to 200 mm with hard limits, and an adjustable end position length of 10 mm. This component operates on compressed air according to ISO 8573-1:2010 [7:4:4] at pressures between 0.1 MPa and 0.8 MPa, utilizing elastic cushioning rings at both ends and a plain-bearing yoke drive with a 0.4 Nm end-position impact energy. Designed with position sensing via proximity switch, an ambient temperature range of -10 °C to 80 °C, and ISO 14644-1 Class 5 cleanroom suitability, it accommodates any mounting position and oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8112914 is a mini straight industrial component featuring a 4 mm nominal width and a push-pull structural design for 6 mm outside diameter pneumatic tubing with an R1/8 external thread. Operating within a pressure range of -0.095 MPa to 0.8 MPa across an ambient temperature range of -5 °C to 60 °C, this unit accommodates compressed air per ISO 8573-1:2010 [7:4:4] and permits lubricated operation. Featuring a blue releasing ring, external hexagon SW10 mounting, and a product weight of 5.74 g, the assembly includes a coating seal on the screwed plug and achieves ISO 14644-1 Class 4 cleanroom suitability with a CRC rating of 1. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8118278 is an electric cylinder featuring a structural design with a ball screw and an integrated actuator, built in size 45 with a 200 mm stroke and a 3 mm/U spindle pitch. This component includes a plain bearing-guide for torsion protection, an M10x1.25 piston rod thread, a 10 mm screw diameter, and supports any mounting position with a 100% duty cycle. Operational performance includes a maximum speed of 0.074 m/s, a maximum acceleration of 1.5 m/s², and a repetition accuracy of ±0.02 mm, supported by an absolute single-turn magnetic rotor position sensor, an LED display, and integrated end-position sensing. Thermal management is handled by an integrated precise CMOS temperature sensor with an analogue output providing shutdown in the event of overtemperature, alongside configurable, non-galvanically isolated digital logic outputs and a user interface. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Festo
The Festo VABS-P12-S-M5-P3 (Part Number: 8068637, GTIN-13: 4052568444846) is an industrial component sub-base manufactured by Festo. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8113172 is a standard blanking plug designed for 4 mm outside diameter pneumatic tubing, supplied in a pack size of 10 with a blue releasing ring. Featuring a PBT housing, POM releasing ring, NBR tubing seal, and stainless steel tube retaining claw, this component operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) and an ambient temperature range of -5 °C to 60 °C. It is rated for compressed air media conforming to ISO 8573-1:2010 [7:4:4], supports lubricated operation, and complies with ISO 14644-1 Class 4 cleanroom suitability, VDMA24364 Zone III LABS conformity, and RoHS material requirements. Submit the part number, quantity, and application requirements to receive an accurate quote for this 2 g part.
View product details →