Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo CMSX-P-SE-C-U-F1-D-130-C (part number 3929540, GTIN 4052568273811) is an official industrial positioner manufactured by Festo. This hardware component integrates specific factory configurations designated by the manufacturer part number and official product name. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a 16 mm piston diameter, 30 mm stroke, and a dual-yoke drive unit operating mode, this Festo industrial component utilizes a plain-bearing guide and elastic cushioning rings or pads at both ends. The double-acting unit functions within an operating pressure range of 0.12 MPa to 0.8 MPa and delivers a theoretical retracting force of 181 N at 6 bar, supporting a maximum payload of 12.6 N based on the stroke at a defined distance xs. Position sensing is accomplished via a proximity switch across an ambient temperature range of -10 °C to 80 °C, featuring a corrosion resistance class of 1 and ISO 14644-1 Class 5 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8110796 is a double-acting industrial component featuring an 80 mm piston diameter, an F07 flange hole pattern, and a stroke range from 10 mm to 1600 mm utilizing elastic cushioning rings or pads at both ends. Operating within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar / 29 psi to 116 psi) at a nominal operating pressure of 0.6 MPa (6 bar / 87 psi), this structural design incorporates a piston, piston rod, tie rod 1, and cylinder barrel with position sensing via proximity switch for any mounting position. It includes ATEX and UKEX explosion protection certifications for Gas Zone 1 and Zone 2, and Dust Zone 21 and Zone 22, aligning with II 2G ATEX category gas classifications and EPL Gb and EPL Db certifications. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8109390 is an electrical industrial component featuring a 100% duty cycle, Class H insulation, and coil characteristics of 48 V DC at 12.0 W with permissible voltage fluctuations of -15% / +10%. Certified for explosion protection including ATEX Zone 1, Zone 2, Zone 21, and Zone 22 with IP66 degree of protection, this 580 g unit operates in explosive ambient temperatures from -25°C to +40°C in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113093 is a standard L-shape industrial component featuring an internal thread lengthwise, an external thread R1/8 pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing utilizing the push-pull principle. This unit operates across an operating pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar or -13.775 psi to 116 psi) with compressed air conforming to ISO 8573-1:2010 [7:4:4], supporting lubricated operation and ambient temperatures between -5 °C and 60 °C. It is constructed with a coating seal on the screwed plug, an external hexagon SW14 mounting type, a blue releasing ring, a product weight of 19.39 g, and is packaged in a pack size of 10 with a corrosion resistance class of 1 and ISO 14644-1 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 8103428 is a double-acting industrial drive unit featuring a 16 mm piston diameter, a 20 mm stroke, and a plain-bearing guide with a 10 mm adjustable end position range. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 0.12 MPa to 0.8 MPa, it delivers a theoretical retracting force of 181 N at 6 bar and incorporates elastic cushioning rings at both ends. This structural design includes position sensing via proximity switch, an ambient temperature range of -10 °C to 80 °C, and achieves ISO 14644-1 Class 5 cleanroom suitability alongside VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo electrical industrial component (Part Number 8109389) features a 100% duty cycle, Class H insulation, and dual-characteristic coil ratings of 24 V DC at 3.5 W and 24 V AC (50/60 Hz) at 3.5 VA with permissible voltage fluctuations of -15% / +10%. Certified for Zone 1, Zone 2, Zone 21, and Zone 22 hazardous locations under ATEX, IEC-EX, and UKEX directives, this IP66-rated unit weighs 580 g, supports any mounting position, and complies with EU and UK RoHS requirements. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8110785 industrial component is a double-acting piston actuator featuring a 100 mm piston diameter, a valve actuator size of 100, an F07 flange hole pattern, and an ISO 5210 standard connection for valves. It operates within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi) at a nominal operating pressure of 0.6 MPa (6 bar, 87 psi), utilizing elastic cushioning rings or pads at both ends and allowing any mounting position. Certified for hazardous locations with ATEX category II 2G and EPL Gb/Db ratings, this unit supports explosion protection in ATEX and UKEX Zones 1, 2, 21, and 22, and accommodates position sensing via proximity switch alongside various piston rod and spacer bolt variants. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8113092 is a standard-sized L-shaped industrial component featuring an R1/8 external thread pneumatic connection 1 and an external thread R1/8, with pneumatic connection 2 accommodating a 4 mm outside diameter pneumatic tubing via a push-pull structural design. Operating within a pressure range of -0.095 MPa to 0.8 MPa and temperatures from -5 °C to 60 °C, this part utilizes a coated screwed plug seal and includes an internal thread lengthwise connection with a blue releasing ring. Each pack size contains 10 units weighing 18.85 g each, featuring VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →Festo
The Festo SMH-S1-HGPP32 (526895) is an industrial component position sensor identified by GTIN 4052568162511. This official Festo product functions as a position sensor for the HGPP-32 gripper series. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8103427 is a double-acting industrial guide drive unit featuring a 16 mm piston diameter, a 10 mm stroke, and a plain-bearing guide operating via two yokes. This component operates at pressures from 0.12 MPa to 0.8 MPa (1.2 bar to 8 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4], delivering a theoretical retracting force of 181 N at 6 bar and supporting a maximum payload of 13.6 N. Designed with elastic cushioning rings at both ends, a 10 mm adjustable end position range, and position sensing via proximity switch, it functions within an ambient temperature range of -10 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8109388 is an electrical industrial component featuring a 100% duty cycle, Class H insulation, and internal fuse protection configured for 24 V DC at 3.5 W or 24 V AC 50/60 Hz at 3.5 VA with permissible voltage fluctuations of -15% / +10%. Certified with an IP66 degree of protection and VDMA24364 Zone III LABS conformity, this unit permits mounting in any position without switching position indication. It carries CE and UKCA markings per RoHS directives alongside explosion protection certifications including EPL Db and Gb for ATEX, IEC-EX, and UKEX Zones 1, 2, 21, and 22, issued under TÜV 21 UKEX 7017 X with specific gas and dust ignition protection types across defined explosive ambient temperature ranges. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8110777 is a double-acting industrial component featuring a 100 mm piston diameter, an 80 mm stroke, and an ISO 5210 standard valve connection with an F07 flange hole pattern. This actuator operates within a pressure range of 0.2 MPa to 0.8 MPa utilizing compressed air according to ISO 8573-1:2010 [7:4:4], delivering a theoretical retracting force of 4524 N at a nominal operating pressure of 6 bar. Built with elastic cushioning rings at both ends and integrated position sensing via proximity switch, the unit functions in any mounting position across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113091 is a standard-sized, L-shaped industrial component featuring an internal thread lengthwise, an M5 external connection, and a 1.8 mm nominal width for 6 mm outside diameter pneumatic tubing. Designed with a push-pull principle and a sealing ring on the screwed plug, this component operates within a pressure range of -0.95 bar to 8 bar and temperatures from -5 °C to 60 °C using compressed air per ISO 8573-1:2010 [7:4:4]. It offers VDMA24364 Zone III LABS conformity, Class 4 cleanroom suitability per ISO 14644-1, and an external hexagon AF 8 mounting with a nominal tightening torque of 0.8 Nm. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8103355 is an electric cylinder with a toothed belt and integrated actuator featuring a size 60 design, a 10.18 mm drive pinion effective diameter, and a stroke length ranging from 10 mm to 80 mm with 0 mm stroke reserve. This component includes a plain bearing-guide for torsion protection, an M10x1.25 piston rod thread, a 2 mm toothed belt pitch with 0.375 % elongation, and supports any mounting position with position sensing via a motor encoder and absolute single-turn magnetic rotor position sensor. Operating parameters include a maximum speed of 0.6 m/s, a maximum acceleration of 9 m/s², a repetition accuracy of ±0.05 mm, LED display, user interface, integrated end-position sensing, and overtemperature shutdown via an integrated CMOS temperature sensor with analog output alongside configurable, non-galvanically isolated digital logic outputs. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8109387 is an electrical industrial component featuring a 100% duty cycle, Class H insulation, and a product weight of 580 g with any mounting position. It operates on 110 V AC at 50/60 Hz with a power of 3.5 VA or 110 V DC at 3.5 W, accommodating permissible voltage fluctuations of -15% / +10%. Certified for explosion protection with EPL Db and Gb ratings, this IP66-rated unit complies with ATEX, IEC-EX, and UKEX Zone 1, 2, 21, and 22 environments under TÜV 21 UKEX 7017 X certification and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8110776 is a double-acting industrial component featuring a piston diameter of 100 mm, a 100 mm stroke, and an F07 flange hole pattern conforming to ISO 5210. Operating within a pressure range of 2 bar to 8 bar using compressed air according to ISO 8573-1:2010 [7:4:4], this unit provides elastic cushioning rings at both ends and delivers a theoretical retracting force of 4524 N at a nominal pressure of 6 bar. Position sensing is accomplished via proximity switch, and the structural design incorporates a piston rod, tie rod 1, and cylinder barrel operable across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113090 is a standard industrial component featuring an L-shape design with an additional internal thread lengthwise, an M5 external connection, and a nominal width of 1.8 mm for 4 mm outside diameter pneumatic tubing. Utilizing a push-pull structural design with a sealing ring on the screwed plug, this component operates across a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C with compressed air per ISO 8573-1:2010 [7:4:4]. Supplied in a pack size of 10 with a product weight of 7.13 g each, the unit requires a nominal tightening torque of 0.8 Nm with a ±5% tolerance applied via an external hexagon AF 8 mounting. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8109386 is an electrical industrial component weighing 580 g that supports any mounting position and a 100% duty cycle, featuring Class H insulation and coil characteristics of 230 V AC at 50/60 Hz with 3.5 VA power or 230 V DC at 3.5 W with permissible voltage fluctuations of -15% / +10%. It carries CE, UKCA, and multiple international explosion protection certifications including ATEX, IEC-Ex, and UKEX for Gas Zone 1 and 2 and Dust Zone 21 and 22, backed by certificate issuing authorities BVS 16ATEXE036X, IECEx BVS16.0028X, and TÜV 21 UKEX 7017 X. This IP66-rated unit complies with VDMA24364 Zone III LABS conformity and operates within explosive ambient temperature ranges defined by T5/T95°C and T6/T80°C ratings. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo SASF-S2-B-F-A56 (4077125) is an official position indicator identified by GTIN 4052568274085. Submit your exact part number, quantity, and application requirements to request a quote for this industrial component.
View product details →