Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
This Festo industrial component, part number 8105826, features an actuator interface code of D32 and a motor input interface code of 40R with a transferable torque of 6.5 Nm. Weighing 309 g with RoHS-compliant materials, the unit supports any mounting position and offers an IP40 degree of protection with VDMA24364-B2-L LABS conformity. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8097185 is an industrial component conforming to IEC 60034 with an S1 rating class, thermal class F, and digital motor temperature transmission via Nikon A format. Featuring IP65 degree of protection for the motor housing without connection technology, a G 2.5 balancing quality, and an IM B5, IM V1, and IM V3 motor type per EN 60034-7, it operates in ambient temperatures from -15 °C to 40 °C and up to 60 °C with a -1.5% per degree Celsius derating. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8102798 is a single-acting industrial component featuring a gear rack and pinion structural design with a valve actuator size of 20 and a 90-degree swivel angle. Operating at a nominal operating pressure of 0.6 MPa (6 bar / 87 psi) with an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, this safety device incorporates an ISO 5211 standard valve connection and VDI/VDE 3845 NAMUR compliance. The integrated safety function relies on spring force from the spring assembly to switch to the defined safety switching position when compressed air is switched off and the spring chamber is exhausted, supporting safety integrity levels up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture per ISO 13849 and IEC 61508. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo Commissioning GFCA-Y2-A2-R, part number 8105391, provides two hours of on-site work covering the introduction and function testing of YJKP function modules based on an example project, alongside remote support for integration into the customer PLC and communication testing. Service provision takes 8 to 10 days subject to agreement, and requires the customer to provide qualified machine personnel, pre-commissioned YJKP hardware, local FFT-software and remote support installations with administrator rights, a stable internet connection with network access, and a master-PLC supporting the function modules. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8092072 is a double-acting industrial component featuring a 50 mm piston diameter, a 45 mm stroke, and an external thread piston rod end with an additional PTFE piston guide. It operates within a pressure range of 0.04 MPa to 1 MPa (0.4 bar to 10 bar, 5.8 psi to 145 psi) using compressed air according to ISO 8573-1:2010 [7:4:4] and accommodates oil lubrication for operation. The unit delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, with elastic cushioning rings at both ends absorbing 0.6 J of impact energy in the end positions. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo VT-3/8-3-3/8 (9180) is an official hollow bolt component identified by GTIN 4052568020453. Request a quote for this specific part number by submitting your required quantity and application specifications.
View product details →
Festo
This Festo industrial component (Part Number 8102797) is a single-acting gear rack and pinion valve actuator featuring a size 20 actuator, an F05 flange hole pattern, a 90-degree swivel angle, and a 12 mm shaft connection depth. Operating at a nominal pressure of 0.35 MPa (3.5 bar / 50.75 psi) with an operating pressure range of 2 bar to 8 bar (29 psi to 116 psi) and a burst pressure of 24 bar, it includes end-position adjusting ranges of -5 degrees to 5 degrees at both 0 degrees and the nominal swivel angle. Certified as a safety device to ISO 13849 and IEC 61508, the unit provides a safety function via spring force that switches the actuator to a defined safety position when compressed air is switched off and the spring chamber is exhausted, supporting up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo Commissioning GFCA-Y2-A2 includes four hours of on-site service to introduce function module setup, test YJKP control modules using an example project, and verify communication with the customer PLC. This offering provides on-site support for integrating required function modules into an empty customer PLC project, with service provision scheduled within 8 to 10 days by agreement. Customer prerequisites mandate that qualified machine personnel are present, the YJKP is electrically and mechanically commissioned, network or internet access is provided, and the master PLC supports the function modules. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 8097184, conforms to standard IEC 60034 and features thermal class F according to EN 60034-1 with a max. winding temperature of 155 °C. The unit operates within an ambient temperature range of -15 °C to 40 °C (extendable up to 60 °C with a derating of -1.5% per degree Celsius) and supports a max. installation height of 4000 m with specific derating above 1,000 m. It incorporates digital motor temperature transmission via Nikon A format, features a degree of protection up to IP65, and utilizes a plug electrical connection with connection pattern RE. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8092071 is a double-acting industrial component featuring a 50 mm piston diameter and a 35 mm stroke, engineered with a piston rod at one end having an external thread. Designed for operation within an ambient temperature range of 0 °C to 80 °C and an operating pressure of 0.4 bar to 10 bar, this unit utilizes compressed air conforming to ISO 8573-1:2010 [7:4:4] with provisions for oil lubrication. It delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, incorporates elastic cushioning rings at both ends, and supports position sensing via proximity switch in any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →Festo
The Festo DPDM-Q-32-5-S-PA (4828490) is a compact cylinder identified by GTIN 4052568292294. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo Commissioning GFCA-Y2-A5-R (Part Number: 8105389) provides three hours of on-site service including data backup and documentation, WebVisu software introduction, configuration and parameterization, remote commissioning support, system testing, and verification of electrical connections and travel paths. Service is provisioned within 8 to 10 days subject to agreement, provided the customer fulfills prerequisites such as mechanical assembly of the YJKP kit, availability of 24 V logic and 230/400 V load voltages, network connectivity, and local installation of FFT-software and remote support tools. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo industrial component.
View product details →
Festo
The Festo 8092070 is a double-acting industrial component featuring a 50 mm piston diameter and a 25 mm stroke, utilizing an external thread piston rod end and elastic cushioning rings at both ends. Designed with an additional PTFE piston guide and a structural design consisting of a piston and piston rod, it operates within a pressure range of 0.4 bar to 10 bar (5.8 psi to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4]. This unit delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, while maintaining an ambient temperature operating range of 0 °C to 80 °C and ISO 14644-1 Class 5 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8097183 is an industrial component conforming to standard IEC 60034 with an S1 rating class, thermal class F, and a maximum winding temperature of 155 °C. This unit features digital motor temperature transmission via Nikon A format, flexible mounting in any position with IM B5, IM V1, or IM V3 motor types, and a G 2.5 balancing quality. Environmental parameters include an ambient temperature range of -15 °C to 40 °C (deratable up to 60 °C), operation up to 4000 m altitude with applicable derating, and IP65 housing protection when utilized without connection technology. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
This Festo industrial component (Part Number 8102796) is a single-acting gear rack/pinion valve actuator featuring a size 20 design, an F05 flange hole pattern, and a nominal swivel angle of 90 degrees with an end-position adjusting range of -5 degrees to 5 degrees at both 0 degrees and the nominal angle. Operating between 2 bar and 8 bar (29 psi to 116 psi) with a 24 bar burst pressure, the unit incorporates a VDI/VDE 3845 NAMUR valve connection, a shaft connection depth of 12 mm, and VDI/VDE 3845 Size AA 1 compatibility for positioners and sensors. Certified as a VDMA 66413 safety device providing spring-driven safety switching upon air exhaust, it supports safety-related control systems up to SIL 2 in low demand mode, SIL 1 in high demand mode, and SIL 3 in a redundant architecture. Submit your exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo commissioning service for the GFCA-Y2-A5 comprises five hours of on-site work including data backup and documentation, introduction to WebVisu software, configuration and parameterization, system tests, and support with electrical cabling and travel path checks. Service provision requires 8-10 days subject to agreement, and customers must ensure the mechanical assembly of the YJKP kit, availability of 24 V logic and 230/400 V load voltage, necessary switches and Ethernet cables, and qualified personnel on site. Submit your exact part number, quantity, and application requirements to receive a formal quotation for this service.
View product details →
Festo
The Festo 8092069 is a double-acting industrial component featuring a 40 mm piston diameter and a 10 mm stroke, operating via compressed air within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar or 8.7 psi to 145 psi). This structural design incorporates elastic cushioning rings at both ends, an external thread piston rod end, an additional PTFE piston guide, and an ambient temperature operating range of 0 °C to 80 °C. It delivers a theoretical force of 754 N advancing and 686 N retracting at 6 bar, while meeting ISO 14644-1 Class 5 cleanroom suitability and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8105115 is an industrial component featuring an M5 size and a product weight of 12 g, supplied in a pack size of 2. Fabricated with high-alloy steel screws, this RoHS-compliant part adheres to corrosion resistance class 1 for low corrosion stress and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo industrial component, part number 8097182, conforms to standard IEC 60034 and features thermal class F according to EN 60034-1 with a max. winding temperature of 155 °C. Operating parameters include an ambient temperature range of -15 °C to 40 °C (up to 60 °C with derating of -1.5% per °C), a max. installation height of 4000 m, and a rating class of S1 with digital motor temperature transmission via Nikon A format. The unit offers an IP65 degree of protection for the motor housing without connection technology, a bearing lifetime of 20000 h under nominal conditions, and mounting positions IM B5, IM V1, or IM V3 as per EN 60034-7. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo ball valve unit KVZB-, designated with part number 8102172, features a product weight ranging from 1 kg to 120 kg and conforms to VDMA24364 Zone III LABS (PWIS) standards. This component includes materials that are RoHS compliant per official Festo documentation. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →