Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
Engineered with a TPE-A construction in blue and a Shore hardness of D 55 +/-3, this Festo industrial component part number 553907 features a 6 mm outside diameter, a 4 mm inside diameter, and a weight of 0.016 kg/m. It operates within an ambient temperature range of -30 °C to 80 °C, handles temperature-dependent operating pressures from -0.095 MPa to 1.9 MPa, and is suitable for energy chains with a 14 mm minimum bending radius and a 32 mm bending radius relevant for flow rate. The tubing accommodates compressed air conforming to ISO 8573-1:2010 [7:-:-], complies with RoHS and VDMA24364-B2-L LABS conformity, carries TÜV certification under certificate number B 013277 0527 00, and connects via plug connections or barbed fittings. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 553225 is a single-acting industrial component featuring a kinematic yoke system with a size 0960 valve actuator and a 90-degree swivel angle. It incorporates an ISO 5211 flange hole pattern of F12 or F16, a VDI/VDE 3845 NAMUR valve connection, and supports a safety integrity level up to SIL 2 in low demand mode without position sensing or cushioning. Operating pressure ranges from 0.42 MPa to 0.84 MPa with a nominal operating pressure of 0.56 MPa, while the end-position adjusting range spans -1 to 9 degrees at 0° and 81 to 91 degrees at the nominal swivel angle. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 555489 is an industrial component featuring a size 40 design and a stroke ranging from 1 to 600 mm with 0 mm stroke reserve, built according to ISO 15552. It provides a permanent feed force of 420 to 640 N, a permanent drive torque of 0.8 to 1.6 Nm, and integrates a plain-bearing guide for torque protection with a maximum torque of 1 Nm. Powered by a stepper motor, servomotor, or DC servo motor, it operates at a 100% duty cycle and includes position detection for proximity sensors with protection classes IP40 or IP65. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 556565 is a double-acting rotary vane industrial component featuring a 40 mm piston diameter, a 125 mm stroke, and a swivel angle range of 0 deg to 240 deg with a 16 deg cushioning angle. Operating on compressed air as per ISO 8573-1:2010 [7:4:4] within a 2.5 bar to 8 bar pressure range, this unit incorporates pneumatic shock absorbers and elastic cushioning rings at both ends, a plain bearing-guide for torsion protection, and through piston rod variants. It achieves a repetition accuracy of 0.1 deg, a 2 deg swivel angle backlash, a -3 deg precision adjustment, a maximum impact velocity of 500 mm/s, and a maximum swivel frequency of 0.7 Hz at 6 bar with any mounting position and position sensing via proximity switch, while allowing oil lubrication. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 553906 is a blue TPE-A industrial pneumatic tubing component featuring a 4 mm outside diameter, a 2.9 mm inside diameter, and a Shore hardness of D 55 +/-3. This component operates with compressed air as per ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure of -0.095 MPa to 1.5 MPa and an ambient temperature range of -30 °C to 80 °C. It is suitable for energy chains, carries TÜV certification under certificate B 013277 0527 00, and adheres to VDMA24364-B2-L LABS conformity with RoHS-compliant materials. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 555488 is an industrial component based on the ISO 15552 standard featuring a size 32 profile, an adjustable stroke from 1 to 400 mm, and an M10x1,25 piston rod thread. This unit incorporates a plain-bearing guide for torque protection, supports a 100% duty cycle, and delivers a permanent feed force between 240 and 300 N alongside a permanent drive torque of 0.3 to 0.6 Nm. Operating within ambient temperatures of 0 to 50 °C, it accommodates stepper, servo, or DC servo motors and offers position detection for proximity sensors with IP40 or IP65 protection classes. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 553224 is a single-acting industrial component featuring a 0960 valve actuator size, an F14 flange hole pattern, and a 90-degree swivel angle utilizing a kinematic yoke system. It operates within a pressure range of 0.42 MPa to 0.84 MPa, achieves a maximum swivel frequency of 1 Hz at 6 bar, and provides a spring force connection pressure of 0.42 MPa with functional safety up to SIL 2 low demand mode. This model includes an ISO 5211 standard valve connection conforming to VDI/VDE 3845 (NAMUR), an unpadded 48.5 mm shaft connection depth, and an adjustable end-position range from -1 degree to 9 degrees at 0 degrees and 81 degrees to 91 degrees at the nominal angle. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 556564 is a double-acting industrial component featuring a rotary vane structural design with a 40 mm piston diameter, a 125 mm stroke, and a swivel angle adjustment range of 0 deg to 270 deg (0 deg to 272 deg total swivel angle). Equipped with elastic cushioning rings/pads at both ends, a plain bearing-guide for torsion protection, and provision for position sensing via proximity switch, this unit operates on compressed air per ISO 8573-1:2010 [7:4:4] at pressures between 2.5 bar and 8 bar. It delivers a max impact velocity of 500 mm/s, a max swivel frequency of 2 Hz at 6 bar, a 2 deg swivel angle backlash, 1 deg repetition accuracy, -6 deg precision adjustment, and a corrosion resistance class of CRC 1, while supporting any mounting position and optional oil lubrication. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo part number 553905 is a black TPE-A pneumatic tubing component featuring a 16 mm outside diameter, a 12 mm inside diameter, and a Shore hardness of D 55 +/-3. It operates with compressed air according to ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure of -0.095 MPa to 1.4 MPa (-0.95 bar to 14 bar / -13.775 psi to 203 psi) and an ambient temperature range of -30 °C to 80 °C. Certified by TÜV under certificate B 013277 0527 00, this RoHS compliant tubing weighs 0.092 kg/m, conforms to VDMA24364-B2-L LABS (PWIS), and is suitable for energy chains with a 67 mm minimum bending radius and a 94 mm bending radius relevant for flow rate. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 555473 is an electro-cylinder with a ball screw design, featuring a size 63 profile and a 300 mm working stroke based on the ISO 15552 standard. This component incorporates a 20 mm spindle diameter with a 20 mm/U spindle pitch, an M16x1,5 piston rod thread, and a plain-bearing guide for torque protection and a non-rotating piston rod variant. It delivers a maximum speed of 1 m/s, a maximum acceleration of 6 m/s2, a repetition accuracy of +/-0,02 mm, and a reversing backlash of 0.05 mm while operating with either a stepper motor or servomotor in any assembly position. Submit the exact part number, quantity, and application requirements to request a formal quote for this item.
View product details →
Festo
The Festo 553223 is a single-acting industrial component featuring a kinematic yoke system with a 0720 valve actuator size, an F14 flange hole pattern, and a 90-degree swivel angle that closes to the right. Operating at a nominal pressure of 0.56 MPa (5.6 bar) with an operating pressure range of 0.42 MPa to 0.84 MPa, this un-cushioned unit offers an adjustable end-position range from -1 degree to 9 degrees at 0 degrees and 81 degrees to 91 degrees at the nominal angle, while supporting up to SIL 2 low demand mode safety integrity levels. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 556562 is a double-acting industrial component featuring a rotary vane structural design with a 40 mm piston diameter, a 100 mm stroke, and an adjustable swivel angle ranging from 0 deg to 240 deg with a 2 deg backlash and -3 deg precision adjustment. Operating on compressed air as per ISO 8573-1:2010 [7:4:4] within a 2.5 bar to 8 bar pressure range, this unit utilizes pneumatic shock absorbers and elastic cushioning rings at both ends, a plain bearing-guide for torsion protection, and proximity switch position sensing. Featuring through hollow piston rods, this assembly accommodates a 16 deg cushioning angle, a 0.7 Hz max swivel frequency at 6 bar, a 500 mm/s max impact velocity, and 0.1 deg repetition accuracy in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 553904 is a black TPE-A industrial pneumatic tubing component featuring a 12 mm outside diameter, an 8.4 mm inside diameter, and a Shore hardness of D 55 +/-3. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure range of -0.095 MPa to 1.7 MPa and an ambient temperature range of -30 °C to 80 °C. Certified by TÜV under authority B 013277 0527 00, this RoHS compliant tubing exhibits VDMA24364-B2-L LABS conformity, weighs 0.06 kg/m, is suitable for energy chains, and includes a minimum bending radius of 29 mm alongside a bending radius relevant for flow rate of 64 mm for plug connections of 12 mm outside diameter. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 553903 is a black TPE-A industrial pneumatic tubing component featuring an outside diameter of 10 mm, an inside diameter of 7 mm, and a Shore hardness of D 55 +/-3. It operates with compressed air according to ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure range of -0.095 MPa to 1.7 MPa and an ambient temperature range of -30 °C to 80 °C. Certified by TÜV under certificate B 013277 0527 00, this RoHS-compliant part supports energy chains with a minimum bending radius of 27 mm and a flow-rate relevant bending radius of 58 mm. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo rotary vane industrial component operates in a double-acting mode with a 40 mm piston diameter, a 100 mm stroke, and an operating pressure range of 2.5 bar to 8 bar. It features an adjustable swivel angle from 0 to 270 degrees with elastic cushioning rings at both ends, a plain bearing-guide for torsion protection, and through, hollow piston rod variants. Position sensing is supported via a proximity switch while utilizing compressed air per ISO 8573-1:2010 [7:4:4] with a CRC rating of 1. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 553222 is a single-acting industrial component featuring a 0720 valve actuator size, an F12 flange hole pattern, and a kinematic yoke system structural design with a 90-degree swivel angle. Operating within a pressure range of 0.42 MPa to 0.84 MPa and a nominal operating pressure of 0.56 MPa, this un-cushioned unit offers an end-position adjusting range from -1 degree to 9 degrees at 0 degrees and 81 degrees to 91 degrees at the nominal angle. It provides a standard ISO 5211 valve connection, VDI/VDE 3845 NAMUR valve connection conformity, safety integrity level up to SIL 2 low demand mode, and closes to the right with any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 553902 is an industrial component pneumatic tubing made from TPE-A in black with an outside diameter of 8 mm, an inside diameter of 5.9 mm, and a shore hardness of D 55 +/-3. It features a minimum bending radius of 22 mm, a bending radius relevant for flow rate of 43 mm, suitability for energy chains, a product weight by length of 0.024 kg/m, and RoHS compliant materials. Operating with compressed air as per ISO 8573-1:2010 [7:-:-], it supports a temperature-dependent operating pressure of -0.095 MPa to 1.5 MPa (-0.95 bar to 15 bar, -13.775 psi to 217.5 psi) across an ambient temperature range of -30 °C to 80 °C, backed by TÜV certification (certificate issuing authority B 013277 0527 00) and VDMA24364-B2-L LABS conformity. This pneumatic connection accommodates plug connections with an outside diameter of 8 mm, barbed fittings with an inside diameter of 6 mm with a union nut, and barbed fittings with an inside diameter of 6 mm. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 556559 is a double-acting industrial component featuring a rotary vane structural design with a 40 mm piston diameter and a 100 mm stroke. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] within an operating pressure range of 2.5 bar to 8 bar, delivering a swivel angle of 0 deg to 240 deg with a 0.1 deg repetition accuracy. This variant includes a through piston rod, plain bearing-guide torsion protection, and both pneumatic shock absorbers and elastic cushioning rings at both ends. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 553221 is a single-acting industrial component featuring a kinematic yoke system with a 0480 valve actuator size, an F14 flange hole pattern, and a 90-degree swivel angle that closes to the right. It operates within a pressure range of 0.42 MPa to 0.84 MPa (4.2 bar to 8.4 bar) at a nominal operating pressure of 0.56 MPa (5.6 bar), utilizing a spring force connection pressure of 0.42 MPa (4.2 bar) and achieving a maximum swivel frequency of 1 Hz at 6 bar. This uncushioned unit accommodates an end-position adjusting range from -1 degree to 9 degrees at 0 degrees and 81 degrees to 91 degrees at the nominal angle, provides an ISO 5211 standard valve connection with a 38.5 mm shaft connection depth, conforms to VDI/VDE 3845 (NAMUR) standards, and supports up to SIL 2 low demand mode safety integrity levels for any mounting position without position sensing. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 556558 is a double-acting rotary vane industrial component featuring a 40 mm piston diameter, a 100 mm stroke, and a swivel angle adjustment range of 0 deg to 270 deg with a 2 deg backlash and 1 deg repetition accuracy. It operates at a pressure of 2.5 bar to 8 bar utilizing compressed air as per ISO 8573-1:2010 [7:4:4], incorporates elastic cushioning rings or pads at both ends, and includes position sensing via a proximity switch. This unit is designed with a through piston rod, a plain bearing-guide for torsion protection, and a corrosion resistance class (CRC) of 1 for low corrosion stress. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →