Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8118888
Guided drive DFM-32-125-P-A-GF-F1A
Engineered with a 32 mm piston diameter, a 125 mm stroke, and a yoke drive unit operating mode, this Festo industrial component features a plain-bearing guide with elastic cushioning rings or pads at both ends. The double-acting unit operates on compressed air within a pressure range of 1.5 bar to 10 bar and achieves a maximum speed of 0.8 m/s across an ambient temperature range of -20 °C to 80 °C. Position sensing is accomplished via proximity switch, and the device meets ISO 14644-1 Cleanroom Class 6 standards while maintaining VDMA24364-B1/B2-L LABS conformity for Li-ion battery production. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8121224
Ball screw axis ELGT-BS-90- -
The Festo 8121224 is an electromechanical linear axis featuring a ball screw with a size 90 design, a working stroke of 50 mm to 1000 mm, and a screw diameter of 15 mm to 16 mm. This component integrates a recirculating ball bearing guide, supports stepper or servo motors, and achieves a maximum acceleration of 15 m/s² alongside a repetition accuracy of ±0.02 mm. Built with VDMA24364 Zone III LABS conformity and ISO 14644-1 Class 6 cleanroom suitability, the unit meets reduced Cu/Zn/Ni standards for lithium-ion battery production environments. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8128142
Radial gripper DHRC-25-A
The Festo part number 8128142 is a size 25 pneumatic industrial component featuring a radial gripper function with two gripper jaws and a positively driven motion sequence. This double-acting actuator system operates at pressures ranging from 0.1 MPa to 0.8 MPa (1 bar to 8 bar) utilizing compressed air according to ISO 8573-1:2010 [7:4:4], with a repetition accuracy of 0.1 mm, a maximum opening angle of 180 degrees, and position sensing via a proximity switch. Featuring lateral connection direction with any mounting position, it achieves a maximum operating frequency of 2 Hz alongside a minimum opening time of 90 ms and closing time of 117 ms at 6 bar. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116855
Parallel gripper DHPC-25-A-NO-S
The Festo part number 8116855 is a pneumatic industrial component featuring two parallel gripper jaws with a size of 25 and a stroke of 7 mm per jaw. This single-acting, open-mode pneumatic gripper utilizes a ball guide with a lever structural design, lateral connection direction, and positively driven motion sequence operating at pressures from 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi). Position sensing is achieved via proximity switch, supporting a maximum operating frequency of 3 Hz with a minimum opening time of 131 ms and closing time of 38 ms at 6 bar. Submit your exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
8118887
Guided drive DFM-32-100-P-A-GF-F1A
The Festo 8118887 is a double-acting industrial drive unit featuring a 32 mm piston diameter, a 100 mm stroke, and a yoke drive mode operating at pressures from 0.15 MPa to 1 MPa (1.5 bar to 10 bar). Equipped with a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, this component supports a max speed of 0.8 m/s and any mounting position using compressed air as per ISO 8573-1:2010 [7:4:4]. Designed with a 50 mm distance of the centre of gravity of the payload to the yoke plate xs, the assembly meets VDMA24364-B1/B2-L LABS conformity, ISO 14644-1 cleanroom Class 6 suitability, and features reduced Cu/Zn/Ni values (F1a) for Li-ion battery production across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Filtration Group
77686488
Filtration Group 77686488 — Filter Element
The Filtration Group part number 77686488 is an industrial component featuring the manufacturer model Filterelement 852370DRG60 852370DRG60 R160T60B HY 18246. This filter element is constructed from Edelstahl-Drahtgewebe with a filtration rating of 60 µm and supports a permissible differential pressure of 20 bar. Request a quote for this component by submitting your exact part number, quantity, and application requirements.
View product details →
Festo
8121127
Coupling EAMD-42-48-19-16X25
Engineered by Festo, part number 8121127 is an industrial component with a size 42 designation, featuring a 19 mm diameter for holder 1 and a 16 mm diameter for holder 2 over a nominal length of 48 mm. This RoHS-compliant unit supports any mounting position, a maximum rotational speed of 6000 rpm, a transferable torque of 17 Nm, and a mass moment of inertia of 45 kgmm², while operating within ambient and storage temperatures of -25 °C to 60 °C and 0 to 95% relative air humidity. Complying with VDMA24364-B2-L LABS conformity, the 212 g assembly is rated for specified storage conditions. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8128136
Angle gripper DHWC-25-A
The Festo size 25 pneumatic gripper features a double-acting mode of operation with two jaws and a bracket gripper function utilizing positively driven motion sequences and lateral connection directions. This component operates at pressures between 0.1 MPa and 0.8 MPa (1 bar to 8 bar) with compressed air according to ISO 8573-1:2010 [7:4:4], achieving a 0.1 mm repetition accuracy, a maximum opening angle of 30 degrees, and a maximum operating frequency of 2 Hz. Position sensing is accomplished via proximity switch, while the structural design supports any mounting position with a corrosion resistance class of CRC 0. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116854
Parallel gripper DHPC-25-A-B-2
The Festo 8116854 is a size 25 double-acting pneumatic parallel gripper featuring two jaws driven by a lever mechanism with a ball guide, offering a stroke of 7 mm per jaw and an operating pressure range of 1 bar to 8 bar (14.5 psi to 116 psi). This component delivers a repetition accuracy of 0.02 mm, a maximum interchangeability and rotational symmetry of 0.2 mm, zero gripper jaw angular play, and zero backlash, with position sensing achieved via a proximity switch. It supports any mounting position, a maximum operating frequency of 3 Hz, a minimum opening time of 79 ms at 6 bar, and excludes specific metals by mass with defined exceptions. Submit the exact part number, quantity, and application requirements to request a quote for this industrial component.
View product details →
Festo
8118886
Guided drive DFM-32-80-P-A-GF-F1A
The Festo part number 8118886 is a double-acting industrial drive unit featuring a yoke structural design, a 32 mm piston diameter, and an 80 mm stroke. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] within an operating pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) and supports a maximum speed of 0.8 m/s. Equipped with a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, this component functions in any mounting position across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8121126
Coupling EAMD-42-48-16-16X25
The Festo industrial component, part number 8121126, features a size 42 construction with a nominal length of 48 mm, a 16 mm diameter for holder 1, and a 16 mm diameter for holder 2. This RoHS-compliant unit supports any mounting position, a maximum rotational speed of 6000 rpm, a transferable torque of 17 Nm, and a mass moment of inertia of 45 kgmm², with a total product weight of 217 g. Operating within an ambient and storage temperature range of -25 °C to 60 °C and 0 to 95% relative air humidity, it meets VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8128107
Radial gripper DHRC-32-A
The Festo 8128107 is a double-acting pneumatic radial gripper featuring two gripper jaws size 32 with a positively driven motion sequence and lateral connection direction. It operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi) utilizing compressed air according to ISO 8573-1:2010 [7:4:4], achieving a maximum operating frequency of 2 Hz with a repetition accuracy of 0.1 mm. Position sensing is enabled via proximity switch, supporting any mounting position with a maximum opening angle of 180 degrees, a maximum interchangeability and rotational symmetry of 0.2 mm, and minimum opening and closing times of 117 ms and 129 ms respectively at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116853
Parallel gripper DHPC-25-A-B-1
The Festo size 25 pneumatic parallel gripper utilizes a double-acting actuator system with two lever-type jaws delivering a 7 mm stroke per jaw. Engineered with a precision ball guide ensuring zero gripper jaw angular play and zero backlash, this component achieves a repetition accuracy of 0.02 mm across an operating pressure range of 14.5 psi to 116 psi. Position sensing is accomplished via proximity switch, supporting a maximum operating frequency of 3 Hz and a minimum opening time of 79 ms at 6 bar. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8121043
Robot kit suction gripper OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3-RA1
The Festo part number 8121043 is an industrial component featuring a 0.95 mm Laval nozzle nominal width and high vacuum ejector characteristics, achieving a maximum vacuum of 92 %. This unit includes integrated functions such as an electric ejector pulse, flow control valve, pressure transmitter, electric on-off valve, filter, and open muffler, along with a piezoresistive pressure sensor for threshold value comparison and fixed hysteresis switching. Operating within a pressure range of 0.2 MPa to 0.7 MPa (2 bar to 7 bar) on compressed air as per ISO 8573-1:2010 [7:4:4], the 300 g device operates on 24 V DC (1.0 W) with a DC operating voltage range of 21.6 V to 26.4 V and delivers a 0 - 10 V analog output. The delivery scope comprises an adapter plate, distance piece, Velcro roll, USB stick with URCap, vacuum generator, suction cup with connection, two connecting cables, five blanking plugs, and six socket head screws. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8118885
Guided drive DFM-32-50-P-A-GF-F1A
The Festo 8118885 is a double-acting industrial drive unit featuring a 32 mm piston diameter, a 50 mm stroke, and a yoke drive mode with a 50 mm center of gravity distance from the payload to the yoke plate. This component utilizes a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via a proximity switch for operation across a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) at speeds up to 0.8 m/s. Constructed with a CRC of 0 and VDMA24364-B1/B2-L LABS conformity, it operates on ISO 8573-1:2010 [7:4:4] compressed air within an ambient temperature range of -20 °C to 80 °C and meets ISO 14644-1 Class 6 cleanroom suitability and F1a Li-ion battery production standards with restricted copper, zinc, and nickel content. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
8128105
Angle gripper DHWC-32-A
Engineered with a size 32 double-acting pneumatic actuator system, this Festo industrial component features two gripper jaws with a bracket function and a max. opening angle of 30 degrees. It operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi) utilizing compressed air as per ISO 8573-1:2010 [7:4:4], achieving a pneumatic gripper repetition accuracy of 0.1 mm and a maximum operating frequency of 2 Hz. The structural design includes a lateral connection direction and positively driven motion sequence, featuring position sensing via proximity switch and a corrosion resistance class (CRC) of 0. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116852
Parallel gripper DHPC-25-A-B
The Festo 8116852 is a double-acting pneumatic parallel gripper featuring two gripper jaws with a 25 size, 7 mm stroke per jaw, and a ball guide structural design leveraging a positively driven motion sequence. This component operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, or 14.5 psi to 116 psi) and achieves a repetition accuracy of 0.02 mm with a maximum operating frequency of 3 Hz and a minimum opening time of 79 ms at 6 bar. Position sensing is accomplished via proximity switch, supporting any mounting position while excluding specific metal constituents by mass as outlined in the manufacturer variants. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
8120907
Filter regulator PCRP-44-G14-12-C-R1-M-T18
The Festo industrial component, part number 8120907, is a Series P filter regulator in size 44 featuring a regulating screw with locknut, manual rotating condensate drain, and a structural design without a pressure gauge set up for G1/4. This unit operates within a pressure range of 1 bar to 20 bar, regulates pressure from 0.5 bar to 12 bar, achieves a max standard flow rate of 2400 l/min with a normal nominal flow rate of 1600 l/min, and incorporates primary pressure compensation and secondary exhausting. Constructed with housing and bowls conforming to NACE MR0175/ISO 15156 standards, the device provides 5 µm filtration for compressed air per ISO 8573-1:2010 [-:4:-] or inert gases, permits vertical ±5° mounting, and includes ATEX certification for Zones 1, 2, 21, and 22. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118884
Guided drive DFM-32-40-P-A-GF-F1A
The Festo 8118884 is a double-acting industrial drive unit featuring a 32 mm piston diameter and a 40 mm stroke, operating within a pressure range of 0.15 MPa to 1 MPa. Constructed with a plain-bearing guide in a yoke structural design, this component utilizes elastic cushioning rings or pads at both ends and achieves a maximum speed of 0.8 m/s with compressed air conforming to ISO 8573-1:2010 [7:4:4]. The assembly accommodates any mounting position, supports position sensing via proximity switch, and meets ISO 14644-1 cleanroom Class 6 standards while excluding specific copper, zinc, and nickel constituents by mass. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8127664
Sensor bracket DASP-F10-125-A
The Festo size 125 industrial component features an anodized wrought aluminum alloy housing designed for tie rods with a piston diameter of Ø125 and mounts in any position. Equipped with high-alloy stainless steel screws requiring a tightening torque of 0.6 Nm to 1 Nm, the 26.5 g part delivers CRC 3 high corrosion stress resistance, VDMA24364-B2-L LABS conformity, and RoHS compliant materials. Request a quote by submitting the exact part number 8127664, quantity, and application requirements.
View product details →