Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8114770
Pressure sensor SPAN-B-V1R-R18M-PN-L1+2.5S
The Festo 8114770 industrial component utilizes a piezoresistive pressure sensor to measure relative pressure across a range of 0 to -0.1 MPa (0 to -1 bar, 0 to -14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It operates within a medium and ambient temperature range of 0 °C to 50 °C using compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases, featuring switchable PNP/NPN switching outputs with window and threshold value comparator functions. Certified with the RCM compliance mark and c UL us - Listed (OL), this RoHS compliant unit adheres to EU and UK directives for EMC and RoHS. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8113033
Push-in L-fitting NPQE-LH-R18-Q6-P10
The Festo 8113033 is an L-shaped industrial component featuring a 4 mm nominal width, a standard size, and a push-pull structural design with a blue releasing ring. This pneumatic fitting connects an R1/8 external thread to 6 mm outside diameter pneumatic tubing via a hollow bolt with an external hex, utilizing a coating seal on the screwed plug. It operates across an entire temperature range from -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, or -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4], while supporting lubricated operation, an ambient temperature range of -5 °C to 60 °C, and any mounting position. The 11.89 g component complies with RoHS standards, has a CRC of 1 for low corrosion stress, conforms to VDMA24364 Zone III for LABS (PWIS), and meets ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118846
Guided drive DFM-20-40-P-A-GF-F1A
The Festo part number 8118846 is a double-acting industrial guide drive unit featuring a 20 mm piston diameter, a 40 mm stroke, and a yoke drive mode with an xs distance of the center of gravity of the payload to the yoke plate of 50 mm. This component incorporates a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, operating at pressures from 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s with compressed air as per ISO 8573-1:2010 [7:4:4]. It is rated for an ambient temperature range of -20 °C to 80 °C, features a corrosion resistance class of CRC 0, meets VDMA24364-B1/B2-L LABS conformity with reduced Cu/Zn/Ni values suitable for Li-ion battery production, and achieves ISO Class 6 cleanroom suitability according to ISO 14644-1. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116822
Parallel gripper DHPC-20-A-B-2
The Festo part number 8116822 is a double-acting pneumatic parallel gripper featuring two jaws with a size of 20 and a 5 mm stroke per jaw. It utilizes a ball guide with a positively driven lever motion sequence, achieving a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, and zero backlash or angular play. Designed for operation between 0.1 MPa and 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi) with a maximum frequency of 3 Hz and a minimum opening time of 62 ms at 6 bar, this component supports position sensing via proximity switch and can be mounted in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8113032
Push-in L-fitting NPQE-LH-R18-Q4-P10
The Festo part number 8113032 is a standard-sized, L-shaped industrial component featuring a 3 mm nominal width and a push-pull structural design with a blue releasing ring. This pneumatic fitting connects an R1/8 external thread to a 4 mm outside diameter tubing, utilizes a coated screwed plug seal, and mounts via a hollow bolt with an external hex in any position. It operates within a pressure range of -0.95 bar to 8 bar (-13.775 psi to 116 psi) and a temperature range of -5 °C to 60 °C using compressed air meeting ISO 8573-1:2010 [7:4:4], while supporting lubricated operation and achieving ISO Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote on this pack size of 10.
View product details →
Festo
8114769
Pressure sensor SPAN-B-B2R-R18M-PN-L1+2.5S
The Festo part number 8114769 is an industrial piezoresistive pressure sensor engineered to measure relative pressure within a range of -0.1 to 0.1 MPa (-1 to 1 bar, -14.5 to 14.5 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4] or inert gases. Featuring an operating and ambient temperature range of 0 °C to 50 °C, this component provides a measurement accuracy of 1.5 %FS, a repetition accuracy of 0.3 %FS, and supports a maximum overload pressure of 5 bar with switchable PNP/NPN switching outputs configured for window or threshold value comparators. It carries RCM compliance, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking for UK EMC and RoHS instructions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118845
Guided drive DFM-20-30-P-A-GF-F1A
The Festo part number 8118845 is a double-acting industrial guide drive unit featuring a 20 mm piston diameter, a 30 mm stroke, and a yoke operating mode with a 50 mm distance from the payload centre of gravity to the yoke plate. Designed with a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, this component operates on compressed air within a 0.2 MPa to 1 MPa pressure range and supports a maximum speed of 0.8 m/s across any mounting position. It meets ISO 14644-1 Cleanroom Class 6 standards, VDMA24364-B1/B2-L LABS conformity, and includes reduced Cu/Zn/Ni values suitable for Li-ion battery production under specific material restrictions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116821
Parallel gripper DHPC-20-A-B-1
Engineered with a parallel, double-acting pneumatic actuator system featuring two lever-driven gripper jaws and a precision ball guide, this Festo industrial component operates at pressures ranging from 1 to 8 bar (14.5 to 116 psi) with a maximum frequency of 3 Hz and a minimum 62 ms opening time at 6 bar. The unit provides a 5 mm stroke per gripper jaw, a repetition accuracy of 0.02 mm, zero angular play and backlash, and accommodates position sensing via proximity switch in any mounting position. Certain copper, zinc, and nickel materials are excluded from its structural design. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Filtration Group
77725583
Filtration Group 77725583 — Filter Element
The Filtration Group 77725583 industrial component, also designated as manufacturer model FILTERELEMENT 852 275 PS 10 / 77725583 | 322799, features a Glasfaser filter element material with a 10 µm filtration rating. This filter element operates with a permissible differential pressure of 20 bar. Request a quote by submitting the exact part number, quantity, and application requirements today.
View product details →
Festo
8113031
Push-in L-fitting NPQE-LH-M5-Q6-P10
The Festo part number 8113031 is a standard-size, L-shaped industrial component featuring a 1.8 mm nominal width and a sealing edge on the screwed plug. Operating via the push-pull principle, this unit accommodates an operating pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4] with lubricated operation possible. It incorporates an M5 external thread pneumatic connection 1 and an external diameter 6 mm pneumatic tubing connection 2, mounted using a hollow bolt with an external hex at a nominal tightening torque of 0.8 Nm with a ±5% tolerance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8114768
Pressure sensor SPAN-B-B11R-R18M-PN-L1+2.5S
The Festo part number 8114768 is an industrial component utilizing a piezoresistive pressure sensor to measure relative pressure across a range of -0.1 to 1 MPa (-1 to 10 bar, -14.5 to 145 psi). This device operates with compressed air conforming to ISO 8573-1:2010 [7:4:4] or inert gases within a medium and ambient temperature range of 0 °C to 50 °C, featuring a 1.5 %FS accuracy and switchable PNP/NPN switching outputs with window or threshold value comparator functions. It carries RCM compliance, c UL us - Listed (OL) certification, CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8118844
Guided drive DFM-20-25-P-A-GF-F1A
The Festo 8118844 is a double-acting industrial guide drive unit featuring a 20 mm piston diameter, a 25 mm stroke, and a yoke operating mode with an xs payload centre of gravity distance of 50 mm. This component integrates a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s using compressed air as per ISO 8573-1:2010 [7:4:4]. Designed with a CRC of 0, VDMA24364-B1/B2-L LABS conformity, ISO 14644-1 class 6 cleanroom suitability, and reduced Cu/Zn/Ni values for Li-ion battery production, the unit functions in ambient temperatures from -20 °C to 80 °C with optional oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116820
Parallel gripper DHPC-20-A-B
The Festo 8116820 is a size 20 pneumatic parallel gripper featuring two jaws driven by a double-acting actuator system with a ball guide. It provides a 5 mm stroke per gripper jaw, a repetition accuracy of 0.02 mm, and a maximum operating frequency of 3 Hz within an operating pressure range of 14.5 psi to 116 psi. Position sensing is accomplished via proximity switch, and the structural design incorporates a positively driven motion sequence with connection direction underneath. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8113030
Push-in L-fitting NPQE-LH-M5-Q4-P10
The Festo 8113030 is a standard L-shaped industrial component featuring an M5 external thread for pneumatic connection 1 and a push-pull design for 4 mm outside diameter pneumatic tubing at connection 2. Operating across a pressure range of -0.095 MPa to 0.8 MPa with compressed air conforming to ISO 8573-1:2010 [7:4:4], this 6.66 g unit includes a sealing ring on the screwed plug and a hollow bolt with an external hex for mounting with a nominal tightening torque of 0.8 Nm. It achieves a CRC rating of 1, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability while functioning at ambient temperatures from -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8114767
Pressure sensor SPAN-B-V1R-G18M-PN-L1+2.5S
The Festo part number 8114767 is an industrial component utilizing a piezoresistive pressure sensor to measure relative pressure across a range of 0 to -0.1 MPa (0 to -1 bar, 0 to -14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It features a switchable PNP/NPN switching output with window and threshold value comparator functions, operating with compressed air meeting ISO 8573-1:2010 [7:4:4] or inert gases within a medium and ambient temperature range of 0 °C to 50 °C. Compliance is demonstrated through RCM, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
8118843
Guided drive DFM-20-20-P-A-GF-F1A
The Festo 8118843 is a double-acting industrial guide drive unit featuring a 20 mm piston diameter and a 20 mm stroke, operating via a yoke mode with a plain-bearing guide. It supports an operating pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar), a maximum speed of 0.8 m/s, and incorporates elastic cushioning rings or pads at both ends. Designed for any mounting position with ISO 8573-1:2010 [7:4:4] compressed air, it includes position sensing via proximity switch and operates within an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8113029
Push-in L-fitting, long NPQE-LL-R12-Q12-P5
The Festo 8113029 is a standard-sized, L-shape long industrial component featuring an external hexagon SW21 mounting and a push-pull structural design for a 12 mm pneumatic tubing outside diameter and an R1/2 external thread. This part operates within a pressure range of -0.095 MPa to 0.8 MPa utilizing compressed air conforming to ISO 8573-1:2010 [7:4:4], with lubricated operation possible across an ambient temperature of -5 °C to 60 °C. Delivered in a pack size of 5 with a blue releasing ring, the unit weighs 82.54 g, carries a CRC rating of 1, and meets VDMA24364 Zone III LABS conformity along with ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116819
Parallel gripper DHPC-20-A-S-2
The Festo part number 8116819 is a size 20 pneumatic industrial component featuring a double-acting parallel gripper function with two gripper jaws and a ball guide. It delivers a stroke of 5 mm per gripper jaw with a repetition accuracy of 0.02 mm, operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar) and a maximum operating frequency of 3 Hz. Position sensing is achieved via proximity switch, and the unit supports any mounting position with a lateral connection direction and flat mounting type. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8114766
Pressure sensor SPAN-B-B2R-G18M-PN-L1+2.5S
The Festo 8114766 industrial component is a piezoresistive pressure sensor designed to measure relative pressure within a range of -0.1 to 0.1 MPa (-1 to 1 bar, -14.5 to 14.5 psi) with an accuracy of 1.5 %FS and a repetition accuracy of 0.3 %FS. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases at temperatures from 0 °C to 50 °C, featuring a max overload pressure of 5 bar and a switchable PNP/NPN switching output with window or threshold value comparator functions. The device carries RCM compliance, c UL us - Listed (OL), CE marking per EU EMC and RoHS directives, and UKCA marking to UK instructions for EMC and RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118837
Guided drive DFM-16-100-P-A-KF-F1A
The Festo part number 8118837 is a double-acting industrial component featuring a 16 mm piston diameter, a 100 mm stroke, and a yoke drive unit operating mode with a payload center of gravity distance xs of 50 mm. Equipped with elastic cushioning rings or pads at both ends, recirculating ball bearing guides, and position sensing via proximity switch, this guide unit operates at pressures from 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s using compressed air as per ISO 8573-1:2010 [7:4:4]. It meets ISO 14644-1 cleanroom class 6 standards and VDMA24364-B1/B2-L LABS conformity with reduced copper, zinc, and nickel values suitable for Li-ion battery production, while excluding most metals containing these elements as a main constituent outside of specific exceptions. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →