Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8113122
Push-in bulkhead connector NPQE-H-Q4-E-P10
The Festo part number 8113122 is a standard bulkhead industrial component featuring a 2.5 mm nominal width and a push-pull structural design for 4 mm outside diameter pneumatic tubing on both connections. Built with a nickel-plated brass housing, a blue POM releasing ring, and a weight of 9.74 g, this component operates within a pressure range of -0.95 bar to 8 bar and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers any mounting position, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 corrosion resistance in a pack size of 10. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116370
Air Solenoid valve VSNC-FT-B52-H-G14-F19
The Festo 8116370 is a 32 mm wide 5/2-way bistable industrial component featuring a piloted, plate seat structural design with soft sealing and a negative overlap lap. This electrically actuated valve delivers a normal nominal flow rate of 1000 l/min across an operating pressure range of 0.15 MPa to 0.8 MPa (1.5 bar to 8 bar) utilizing internal pilot air supply and a NAMUR connection pattern conforming to VDI/VDE 3845. Equipped with an adjustable exhaust air function, non-detenting manual override, and 100% duty cycle, the unit operates with a 20 ms changeover time in any mounting position via a separately ordered solenoid coil. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8111597
Angle seat valve VZXA-B-TS6-50-M2-B1T-5.6-K-75-20-PM
The Festo part number 8111597 is a 2/2 externally controlled industrial component featuring a poppet valve design with a pneumatic piston actuator and a mechanical spring reset method. Designed for non-reversible, under-valve-seat flow of gaseous and liquid media including vapor, water, inert gas, and mineral oil up to 600 mm²/s, it operates at a medium pressure of 0 bar to 5.6 bar and an operating pressure of 5 bar to 7 bar through G1/8 internal thread pneumatic connections and G2 threaded sleeve cable connections. This unit accommodates a medium temperature range of -10 °C to 180 °C, an ambient temperature range of 0 °C to 60 °C, a Kv flow rate of 38.8 m³/h, and supports in-line installation in any mounting position for weather-protected exterior locations class C1 based on IEC 60654-1. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
8113121
Push-in bulkhead connector NPQE-H-Q3-E-P10
The Festo part number 8113121 is a standard-sized bulkhead industrial component featuring a 2.2 mm nominal width and a push-pull structural design for 3 mm outside diameter pneumatic tubing on both connections. Constructed with a nickel-plated brass housing, a blue POM releasing ring, and an operating pressure range of -0.95 bar to 8 bar, this component supports compressed air media per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -5 °C to 60 °C. Each pack contains 10 units with a product weight of 6.1 g each, complying with RoHS materials and achieving ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8117063
Proximity switch SDBF-FCS-1L-NU-K-9-N-LE
The Festo 8117063 is an industrial component featuring a block design and a magneto-resistive measuring principle to monitor position within an ambient temperature range of -4 °F to 176 °F. It operates on a DC voltage range of 6 V to 24 V, providing an NPN N.O. contact switching output with a maximum output current of 500 mA, a maximum DC switching capacity of 12 W, and a 4 µs on time. Equipped with short-circuit protection, reverse polarity protection, and RoHS-compliant materials, this part utilizes a longitudinal gray PVC cable with 3 open-ended wires. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
8116369
Air Solenoid valve VSNC-FTC-M52-MH-G14-F19
The Festo 8116369 is a 32 mm wide industrial component featuring a switchable 5/2- or 3/2-way valve function with an electrical actuation type and a piloted control system utilizing an internal pilot air supply port. Built with a plate seat structural design, soft sealing principle, and negative overlap lap, this unit delivers a normal nominal flow rate of 800 l/min alongside an adjustable exhaust air function and a mechanical spring reset method. It operates within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar), conforms to the VDI/VDE 3845 NAMUR standard with a NAMUR connection pattern, and requires an operating voltage via a separately ordered solenoid coil. Please submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8111596
Angle seat valve VZXA-B-TS6-40-M2-B1T-9.3-K-75-20-PM
The Festo part number 8111596 is an externally controlled 2/2 poppet valve with a piston actuator and a mechanical spring reset method, utilizing in-line installation with any mounting position. This pneumatic component operates with medium pressure from 0 MPa to 0.93 MPa and an operating pressure of 0.5 MPa to 0.7 MPa, handling media such as vapor, mineral oil, water, inert gas, and neutral liquids up to a viscosity of 600 mm²/s within a medium temperature range of -10 °C to 180 °C. Featuring a flow rate Kv of 32.9 m³/h and a non-reversible flow direction under the valve seat, it includes a G1 1/2 threaded sleeve cable connection and a G1/8 internal thread pneumatic connection for weather-protected exterior locations. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8113120
Push-in connector NPQE-D-Q16-E-P5
The Festo part number 8113120 is an industrial component featuring a straight design with a standard size and a nominal width of 13 mm, supplied in a pack size of 5. Utilizing a push-pull structural design with a blue releasing ring, this component connects pneumatic tubing with an outside diameter of 16 mm at connection 1 and connection 2. Constructed with a PBT housing and a POM releasing ring, it operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar / -13.775 psi to 116 psi) using compressed air according to ISO 8573-1:2010 [7:4:4] and supports lubricated operation across an ambient temperature range of -5 °C to 60 °C. Additional verified attributes include a product weight of 22.4 g, any mounting position, corrosion resistance class 1, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and RoHS compliance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8117062
Proximity switch SDBF-FCS-1L-PU-K-9-N-LE
The Festo 8117062 is a block-design industrial component utilizing a magneto-resistive measuring principle to measure position within an ambient temperature range of -4 °F to 176 °F. Featuring a RoHS-compliant build, this unit includes a PNP switching output with an N.O. contact, a 4 µs on time, a max output current of 500 mA, a max DC switching capacity of 12 W, a 1 V voltage drop, and a DC operating voltage range of 6 V to 24 V with integrated short-circuit and reverse polarity protection. Electrical connection is achieved via a 3-pin open-end PVC cable with a longitudinal orientation and gray sheath. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8116173
Motion App GAMM-A33
The Festo Motion App GAMM-A33 is an industrial component featuring a response sensitivity of 10 mm and a typical positioning accuracy of ±1.5 mm. Its maximum overshoot in relation to the setpoint position is specified at ±2.5 mm. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8113119
Push-in connector NPQE-D-Q14-E-P5
This Festo industrial component, part number 8113119, is a straight-design fitting featuring a standard size with a 13 mm nominal width and a push-pull structural design for 14 mm outside diameter pneumatic tubing on both connections. Built with a PBT housing, a blue POM releasing ring, and a weight of 19.88 g, it operates within a pressure range of -0.95 bar to 8 bar and temperatures from -5 °C to 60 °C using compressed air conforming to ISO 8573-1:2010 [7:4:4]. The part offers RoHS compliance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance, with any mounting position and lubricated operation supported. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8111595
Angle seat valve VZXA-B-TS6-32-M2-B1T-13.5-K-75-20-PM
The Festo 8111595 is an externally controlled industrial component featuring a 2/2 poppet valve design with a piston actuator and mechanical spring reset. It enables non-reversible, under-valve-seat flow for gaseous and liquid media including vapor, water, neutral liquids, mineral oil, hydraulic fluid based on mineral oil, inert gas, and filtered compressed air with a 200 µm filter mesh. Operating within a medium pressure range of 0 bar to 13.5 bar and temperatures from -10 °C to 180 °C, this unit provides a Kv flow rate of 24.4 m³/h and supports in-line installation in any mounting position for weather-protected exterior locations. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Filtration Group
77822547
Filtration Group 77822547 — Filter Element
The Filtration Group part number 77822547 is an industrial component featuring the manufacturer model designation FILTERELEMENT 852 087 SMX 3 / 77822547 | 362368. This filter element is constructed from Glasfaser material with a filtration rating of 3 µm and supports a permissible differential pressure of 20 bar. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
8115892
Connecting cable NEBV-Q7G2-PD-0.1-N-LE2
The Festo part number 8115892 is an industrial component featuring a square field device side socket with a straight cable outlet, connection pattern Q7, and 2 occupied pins out of 2 total pins. The control side utilizes a twin cable with 2 open-ended wires, operating within a DC voltage range of 0 V to 30 V and a current rating of 0.3 A at 40° C. This 0.5 g unit includes 20 contact durability cycles, a surge resistance of 1.2 kV, no reverse polarity protection, and is supplied without a label holder via inserted mounting. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8113118
Push-in connector NPQE-D-Q14-Q12-P5
The Festo part number 8113118 is a straight industrial component featuring a push-pull structural design with a nominal width of 10 mm and a standard size, supplied in a pack size of 5. This component accommodates pneumatic connection 1 for 14 mm outside diameter tubing and pneumatic connection 2 for 12 mm outside diameter tubing, utilizing a PBT housing and a blue POM releasing ring. It operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar | -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] across ambient temperatures from -5 °C to 60 °C, supporting lubricated operation and meeting VDMA24364 Zone III LABS conformity with a class 4 ISO 14644-1 cleanroom rating. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8117060
Seal-SET DADG-SK-C7-4"
The Festo 8117060 Seal-SET DADG-SK-C7-4" is a size 4" industrial component adhering to VDMA24364 Zone III LABS (PWIS) conformity and featuring RoHS compliant materials. This assembly operates within an ambient temperature range of 23 °F to 165 °F as documented in the official Festo EN-US data sheet. Request a formal quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
8111594
Angle seat valve VZXA-B-TS6-32-M2-B1T-4.4-K-46-17-PM
This Festo 8111594 industrial component is an externally controlled 2/2 poppet valve featuring a piston actuator and a non-reversible flow direction under the valve seat for gaseous and liquid media. The unit accommodates a medium pressure range of 0 MPa to 0.44 MPa, an operating pressure of 0.5 MPa to 0.7 MPa, and a maximum viscosity of 600 mm²/s across medium temperatures from -10 °C to 180 °C. Configured for in-line installation in any mounting position, it utilizes a G1 1/4 threaded sleeve cable connection per DIN ISO 228 and a G1/8 internal thread pneumatic connection. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8115760
Coupling EAMC-30-32-8-12
Engineered with a nominal length of 32 mm and a size 30 designation, this Festo industrial component features a holder diameter of 8 mm on one end and 12 mm on the other, supporting any mounting position. The assembly accommodates a maximum rotational speed of 8,000 rpm, a transferable torque of 12.5 Nm, and a mass moment of inertia of 5.87 kgmm² at a product weight of 48 g. Operating and storage temperatures range from -25 °C to 60 °C within a 0 to 95% relative air humidity range, while meeting VDMA24364-B2-L LABS conformity and RoHS material requirements. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8117059
Seal-SET DADG-SK-C7-3 1/4"
The Festo seal-SET DADG-SK-C7-3 1/4" is an industrial component featuring a size of 3 1/4" and VDMA24364 Zone III LABS conformity. This RoHS compliant assembly operates within an ambient temperature range of 23 °F to 165 °F. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8113117
Push-in connector NPQE-D-Q14-Q10-P5
This Festo industrial component, part number 8113117, features a straight design with a standard size, a 9.3 mm nominal width, and a push-pull structural design configured for 14 mm to 10 mm pneumatic tubing outside diameters. The PBT housing and POM releasing ring support an operating pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) for compressed air media according to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Delivered in a pack size of five with a product weight of 18.22 g each, the unit offers any mounting position, Class 4 cleanroom suitability per ISO 14644-1, and VDMA24364 Zone III LABS conformity with RoHS compliance. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →