Global industrial sourcing · Houston, Texas info@mropartsrfq.com

Industrial sourcing catalog

Search by Manufacturer Part Number

Browse verified product records and request commercial availability, lead time and technical documentation.

135,700 results
Festo 535861

Festo

535861

Parallel gripper HGPT-20-A

The Festo part number 535861 is a double-acting parallel industrial component featuring two gripper fingers with a size of 20 and a 4 mm stroke per gripper jaw. Utilizing an inclined plane and guided motion sequence design structure, it operates at a working pressure of 3 to 8 bar with a sealing air pressure of 0 to 0.5 bar, delivering a total opening force of 150 N and closing force of 140 N at 6 bar. This unit includes position detection for proximity sensors and achieves a repetition accuracy of <= 0.04 mm with a maximum replacement accuracy of <= 0.2 mm. Submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 533778

Festo

533778

Motor controller SEC-AC-305-PB-P01

This Festo industrial component operates on a single-phase nominal operating voltage of 230 V at 50 to 60 Hz with a nominal controller power of 1,000 VA and a nominal current of 5 A. It features an integrated mains filter, an integrated bus terminating resistor, a 100 Ohm braking resistance with a 1.3 kVA pulse power, and electrically isolated digital logic outputs that are freely configurable to a given extent with a maximum current of 100 mA. Additional specifications include a 20 kOhm setpoint input impedance, a 340 V max intermediate circuit voltage DC, 24 V nominal DC voltage logic power supply, and an RS232 configuration interface operating from 9600 to 57600 Bits/s. Submit the exact part number, quantity, and application requirements for a formal quote.

View product details →
Festo 534187

Festo

534187

Filter regulator LFR-M7-D-7-O-5M-MICRO-H-B

The Festo part number 534187 is a micro-sized Series D filter regulator without a pressure gauge, featuring a rotary knob with lock and a semi-automatic condensate drain. It operates with a working pressure of 1 to 10 bar, a pressure regulation range of 0.5 to 7 bar, and delivers a standard nominal flow rate of 280 l/min using compressed air or inert gases. Designed for a vertical assembly position within plus or minus 5 degrees, this component incorporates secondary exhaust functionality, an M5-ready pressure gauge connection, and a 5 µm filtration grade. Submit the exact part number, quantity, and application requirements to receive an RFQ quote.

View product details →
Festo 535860

Festo

535860

Parallel gripper HGPT-16-A-G2

The Festo part number 535860 is a double-acting parallel industrial component featuring two gripper fingers with a size of 16 and a stroke of 3 mm per jaw. Utilizing an inclined plane and guided motion sequence design structure, it operates at a working pressure of 5 to 8 bar on dried compressed air, delivering a minimum opening time of 41 ms and a minimum closing time of 21 ms at 6 bar. This unit achieves a maximum replacement accuracy of 0.2 mm or less, a gripping repetition accuracy of 0.03 mm or less, and includes position detection for a proximity sensor with any assembly position. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 534186

Festo

534186

Filter regulator LFR-M7-D-7-O-5M-MICRO-B

The Festo 534186 is a micro-sized Series D filter regulator featuring a 5 µm filtration grade, a manual rotary condensate drain with a maximum 3 cm3 volume, and an M5-ready pressure gauge connection. Operating within a working pressure range of 1 to 10 bar and a regulation range of 0.5 to 7 bar, this unit delivers a standard nominal flow rate of 280 l/min with secondary exhaust and a maximum pressure hysteresis of 0.3 bar. Designed for vertical installation within +/- 5° using compressed air or inert gases, it operates in ambient and medium temperatures from -10 to 60 °C while maintaining an output air purity class of ISO 8573-1:2010 [6:8:4] and a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →
Festo 535859

Festo

535859

Parallel gripper HGPT-16-A-G1

The Festo part number 535859 is a double-acting parallel industrial component featuring two gripper fingers with a size of 16 and a stroke of 3 mm per gripper jaw. Operating on dried compressed air, lubricated or unlubricated, at a working pressure of 5 to 8 bar, this unit utilizes an inclined plane and guided motion sequence design with gripper force back-up during opening. It achieves a repetition accuracy of <= 0.03 mm, a max replacement accuracy of <= 0.2 mm, and supports position detection for a proximity sensor in any assembly position. Submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 533754

Festo

533754

Motor unit MTR-DCI-62

The Festo 533754 is an industrial component driven by a 48 V DC nominal voltage, delivering a nominal motor power of 316.8 W and a nominal rotary speed of 3,400 1/min through a planetary gear unit. Equipped with a PWM-MOSFET power output stage, an optical incremental encoder rotor position sensor, and an RS232 configuring interface operating at 9600 Baud, the unit provides comprehensive protective functions including I²t monitoring, temperature monitoring with over-temperature shutdown, current and voltage failure detection, drag error monitoring, and software end-position detection. It features an IP54 protection class, insulation protection class F, a maximum speed of 3,400 1/min, a nominal motor current of 6.19 A, a peak current of 20 A, and operates within a permissible voltage fluctuation of -10% to +5% while carrying a CE symbol according to the EU-EMV guideline. Submit the exact part number, quantity, and application requirements for an RFQ quote.

View product details →
Festo 535858

Festo

535858

Parallel gripper HGPT-16-A

The Festo part number 535858 is a double-acting parallel industrial component featuring two gripper fingers and a size 16 design structure utilizing an inclined plane with a guided motion sequence. It operates at a working pressure of 3 to 8 bar, delivering a total opening force of 84 N and a total closing force of 72 N at 6 bar with a stroke of 3 mm per gripper jaw. This component provides a repetition accuracy of 0.03 mm or less, a maximum replacement accuracy of 0.2 mm or less, and includes provisions for position detection via proximity sensor. Submit the exact part number, quantity, and application requirements for an RFQ quote.

View product details →
Festo 533748

Festo

533748

Motor unit MTR-DCI-52

The Festo part number 533748 is an industrial component featuring a 24 V DC nominal voltage, 122.4 W nominal motor power, and a planetary gear unit driven by a PWM-MOSFET power output stage controller operating mode. Operating at a nominal and maximum speed of 3,000 1/min with an insulation protection class F, it incorporates an incremental optical encoder rotor position sensor and an RS232 configuring interface operating at 9600 Baud. Integrated protective functions include I²t, temperature, current, voltage failure, drag error, and software end-position detection, supported by an IP54 protection class and CRC 0 corrosion resistance classification. Submit the exact part number, quantity, and application requirements to receive a quote.

View product details →
Festo 535857

Festo

535857

Parallel gripper HGPL-40-80-A

The Festo 535857 is a double-acting parallel industrial component featuring two gripper fingers, a size 40 designation, and an 80 mm stroke per gripper jaw. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a 3 to 8 bar working pressure range, it delivers a total opening force of 1,038 N and a closing force of 1,216 N at 6 bar. This twin piston, rack and pinion design incorporates position detection for proximity sensors and achieves a repetition accuracy of less than 0.03 mm alongside a maximum replacement accuracy under 0.2 mm. Submit part number 535857, quantity, and application requirements to request a quote.

View product details →
Festo 534183

Festo

534183

Filter LF-M7-D-5M-MICRO-H-B

The Festo 534183 is a micro-sized industrial component featuring a D series design structure with a sintered filter and centrifugal separator for compressed air and inert gases. Weighing 44 g with M7 pneumatic connections, this unit operates at 1 to 10 bar with a standard nominal flow rate of 280 l/min and a 5 µm filtration grade. It includes a semi-automatic condensate drain with a maximum condensate volume of 3 cm3 and supports vertical installation within ±5°. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 533742

Festo

533742

Motor unit MTR-DCI-42

The Festo part number 533742 is an industrial component powered by a 24 V DC nominal voltage with a 48 W nominal motor power, 2 A nominal motor current, and a 3.8 A peak current, operating at a nominal and maximum rotary speed of 3,000 1/min through a planetary gear unit with an optical incremental encoder rotor position sensor and a PWM-MOSFET power output stage controller operating mode. Featuring Class F insulation protection, an IP54 protection class, and a CRC of 0, this unit integrates an RS232 configuring interface operating at 9600 Baud alongside protective functions including I²t, temperature, current, voltage failure, drag error, and software end-position detection, with a silicon absolute temperature sensor providing over-temperature shutdown. It operates within a permissible voltage fluctuation of +/- 10 %, a storage temperature range of -25 to 60 °C, and 0 to 95 % non-condensing relative air humidity, carrying a CE symbol in accordance with the EU-EMV guideline. Submit the exact part number, quantity, and application requirements for an RFQ quote.

View product details →
Festo 535856

Festo

535856

Parallel gripper HGPL-40-40-A

The Festo 535856 is a double-acting parallel industrial component featuring two gripper fingers, a size 40 designation, and a 40 mm stroke per gripper jaw. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a 3 to 8 bar working pressure range, this twin piston unit delivers a total opening force of 1,038 N and a total closing force of 1,216 N at 6 bar. It incorporates position detection for a proximity sensor, a maximum replacement accuracy under 0.2 mm, and a repetition accuracy under 0.03 mm. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 534182

Festo

534182

Filter LF-M7-D-5M-MICRO-B

The Festo 534182 is a micro-sized Series D industrial component featuring a sintered filter with a centrifugal separator and a 5 µm filtration grade for compressed air and inert gases. It operates at a working pressure of 0 to 10 bar, a standard nominal flow rate of 280 l/min, and supports a maximum condensate volume of 3 cm3 via a manual rotary condensate drain. Constructed with a PE filter material and a CRC 2 moderate corrosion resistance classification, the unit weighs 44 g and accommodates M7 pneumatic connections with a vertical +/- 5° assembly position. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 533736

Festo

533736

Motor unit MTR-DCI-32

The Festo 533736 is an industrial component driven by a 24 V DC nominal voltage with a nominal motor power of 17.5 W, a nominal motor current of 0.73 A, and a peak current of 2.1 A, operating at a nominal rotary speed of 3,250 1/min up to a maximum speed of 3,300 1/min. This unit features a planetary gear unit, an optical incremental encoder for rotor position sensing, and a PWM-MOSFET power output stage controller operating mode with an RS232 configuring interface operating at 9600 Baud. Comprehensive protective functions include I²t monitoring, temperature monitoring via a silicon absolute temperature sensor with over-temperature shutdown, current monitoring, voltage failure detection with a permissible voltage fluctuation of +/- 10 %, drag error monitoring, and software end-position detection within an IP54 protection class and insulation protection class F enclosure. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →
Festo 535855

Festo

535855

Parallel gripper HGPL-25-80-A

The Festo 535855 is a double-acting parallel industrial component featuring two gripper fingers, a size 25 design structure with twin pistons, guides, piston slides, a T-shape, and rack and pinion mechanisms providing an 80 mm stroke per jaw. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] at a working pressure of 3 to 8 bar, it delivers a total opening force of 412 N and a closing force of 512 N at 6 bar. This unit achieves a repetition accuracy of under 0.03 mm, replacement accuracy below 0.2 mm, and rotationally symmetrical precision within 0.2 mm, with integrated position detection for proximity sensors. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 533710

Festo

533710

Coupling EAMC-42-50-14-20

The Festo 533710 is an industrial component featuring a holder diameter 1 of 14 mm, a holder diameter 2 of 20 mm, and a size 42 construction with a product weight of 138 g and materials conforming to RoHS. It supports any assembly position, a maximum speed of 6,000 1/min, a mass moment of inertia of 34.8 kgmm2, and a transferable torque of 17 Nm while operating within an ambient and storage temperature range of -25 to 60 °C and a relative air humidity of 0 to 95 %. Submit the exact part number, quantity, and application requirements to request a quote for this item.

View product details →
Festo 535854

Festo

535854

Parallel gripper HGPL-25-40-A

The Festo part number 535854 is a double-acting parallel industrial component featuring two gripper fingers with a size 25 specification and a stroke of 40 mm per jaw. Its structural design incorporates a twin piston, guide, piston slide, T-shaped configuration, and rack and pinion mechanism, operating at a working pressure range of 3 to 8 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4]. This unit delivers a total force of 412 N for opening and 512 N for closing at 6 bar, with position detection enabled for a proximity sensor. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 534180

Festo

534180

Pressure regulator LR-M7-D-7-MICRO-B

The Festo 534180 is a micro-sized D series directly-controlled diaphragm regulator featuring an integrated pressure gauge, a rotary knob with lock, and M7 pneumatic connections for port 2. Operating within a working pressure range of 1 to 10 bar and a regulation range of 0.5 to 7 bar, this component delivers a standard nominal flow rate of 300 l/min with secondary exhaust and a maximum pressure hysteresis of 0.3 bar. Designed for compressed air and inert gases meeting ISO 8573-1:2010 [7:4:4] standards, it accommodates any assembly position, line installation or optional accessory mounting, and a moderate corrosion resistance classification CRC of 2 across ambient and medium temperatures of -10 to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this 90 g industrial component.

View product details →
Festo 535853

Festo

535853

Parallel gripper HGPL-14-80-A

The Festo part number 535853 is a double-acting parallel industrial component featuring two gripper fingers with an 80 mm stroke per jaw and a size 14 design structure incorporating twin pistons, a guide, a piston slide, a T-shape, and rack and pinion mechanics. It operates on compressed air compliant with ISO 8573-1:2010 [7:4:4] at a working pressure of 3 to 8 bar, delivering total forces at 6 bar of 126 N for opening and 158 N for closing. The unit achieves a maximum replacement accuracy and angular gripper jaw backlash of less than 0.2 mm and 0.2 degrees respectively, a gripper jaw backlash Sz under 0.05 mm, and a repetition accuracy under 0.03 mm for any assembly position. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →