Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8124418
Ball screw axis ELGT-BS-90-50-20P
The Festo 8124418 is an electromechanical linear axis featuring a ball screw with a size 90 profile, a 50 mm working stroke, a 15 mm screw diameter, and a 20 mm/U spindle pitch. Engineered with a recirculating ball bearing guide and compatible with stepper or servo motors, this unit achieves a maximum speed of 1 m/s, a max acceleration of 15 m/s², a max rotational speed of 3000 rpm, and a repetition accuracy of ±0.02 mm with 0 mm stroke reserve and 150 µm reversing backlash. Built for a 100% duty cycle in any mounting position, the assembly complies with VDMA24364 Zone III LABS conformity, meets ISO 14644-1 Class 6 cleanroom standards, and has reduced Cu/Zn/Ni variants making it suitable for Li-ion battery production. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8133475
Angle gripper DHWC-32-A-S-NO
The Festo part number 8133475 is a single-acting pneumatic industrial component featuring a bracket gripper function with two jaws and an open mode of operation. Driven by a pneumatic actuator system supporting an operating pressure range of 0.15 MPa to 0.8 MPa (1.5 bar to 8 bar or 21.75 psi to 116 psi), this size 32 device delivers a repetition accuracy of 0.1 mm, a maximum opening angle of 30 degrees, and a gripping force backup on opening. It achieves a maximum operating frequency of 2 Hz with a minimum opening time of 43 ms and a minimum closing time of 16 ms at 6 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. Submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8141529
Solenoid valve VUVG-B14-T32C-MZT-F-1T1L-F1A
The Festo part number 8141529 is a 14 mm electrical industrial component featuring a 2x3/2 closed, monostable piston gate valve design with a soft sealing principle and positive overlap. Operating at 24V DC within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar), this piloted unit delivers a normal nominal flow rate of 440 l/min through a flange pneumatic working port and features an external pilot air supply port, adjustable exhaust air function, and reversible flow direction. Equipped with a mechanical spring reset, detenting and non-detenting manual override, LED signal status display, and an IP40 degree of protection, the assembly supports any mounting position and carries c UL us recognition. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8142914
Compact cylinder ADN-S-50-40-A-P-A-F1A
The Festo 8142914 is a double-acting industrial component featuring a 50 mm piston diameter, a 40 mm stroke, and an external thread piston rod at one end. This piston and piston rod assembly operates on compressed air per ISO 8573-1:2010 [7:4:4] across an operating pressure range of 0.04 MPa to 1 MPa (0.4 bar to 10 bar, 5.8 psi to 145 psi) with elastic cushioning rings at both ends. It delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, with position sensing via proximity switch and suitability for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for an RFQ.
View product details →
Festo
8124417
Ball screw axis ELGT-BS-90-900-10P
The Festo 8124417 is an electromechanical linear axis featuring a ball screw with a 900 mm working stroke, a size 90 profile, and an integrated recirculating ball bearing guide. This component supports a 100% duty cycle, a maximum speed of 0.5 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.02 mm, with compatibility for both stepper and servo motors. It is constructed to meet VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 6 cleanroom suitability, and reduced Cu/Zn/Ni F1a specifications for Li-ion battery production facilities. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8141528
Solenoid valve VUVG-B14-T32H-AZT-F-1T1L-F1A
The Festo 8141528 is a 14 mm electrical industrial component featuring a 2x3/2 open/closed monostable piston gate valve design with a soft sealing principle and positive overlap. Operating at 24V DC with an operating pressure range of 1.5 bar to 10 bar and a normal nominal flow rate of 490 l/min, this piloted valve incorporates a pneumatic spring reset, external pilot air supply, adjustable exhaust air function, and both detenting and non-detenting manual overrides. It is c UL us recognized (OL) with an IP40 degree of protection, an LED signal status display, and supports any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
8142913
Compact cylinder ADN-S-50-35-A-P-A-F1A
The Festo 8142913 is a double-acting industrial component featuring a 50 mm piston diameter and a 35 mm stroke, engineered with a piston rod at one end and an external thread on the rod end. It operates within a pressure range of 0.04 MPa to 1 MPa (0.4 bar to 10 bar / 5.8 psi to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4], delivering a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar. This unit incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and supports any mounting position while meeting ISO 14644-1 Class 5 cleanroom standards and VDMA24364-B2-L LABS conformity with reduced Cu/Zn/Ni values for Li-ion battery production facilities. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8124416
Ball screw axis ELGT-BS-90-800-10P
The Festo electromechanical linear axis, part number 8124416, features a size 90 structural design with an 800 mm working stroke and a recirculating ball bearing guide. This unit incorporates a 16 mm diameter ball screw with a 10 mm/U spindle pitch, delivering a reversing backlash of 150 µm, a repetition accuracy of ±0.02 mm, and a maximum speed of 0.5 m/s at a 100% duty cycle. Operating with either a stepper or servo motor up to 3000 rpm and 15 m/s² maximum acceleration, it complies with VDMA24364 Zone III LABS conformity for ISO Class 6 cleanrooms and reduced Cu/Zn/Ni battery production. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
8141527
Solenoid valve VUVG-B14-T32U-AZT-F-1T1L-F1A
The Festo 8141527 is a 2x3/2 open monostable industrial component featuring a 14 mm valve size, a piston gate valve structural design with a soft sealing principle, and a normal nominal flow rate of 490 l/min normalized to DIN 1343. Operating on 24V DC with an operating pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar), this electrically actuated, piloted valve utilizes a pneumatic spring reset method, an external pilot air supply port, and features adjustable exhaust air function, detenting and non-detenting manual override, positive overlap lap, an LED signal status display, and IP40 degree of protection in any mounting position. Certified as c UL us - recognized (OL), it accommodates a pilot pressure of 0.15 MPa to 0.8 MPa via a flange pneumatic working port. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
8142912
Compact cylinder ADN-S-50-30-A-P-A-F1A
The Festo 8142912 is a double-acting industrial component featuring a 50 mm piston diameter and a 30 mm stroke, operating via compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of 0.04 MPa to 1 MPa (0.4 bar to 10 bar, 5.8 psi to 145 psi). This unit incorporates elastic cushioning rings at both ends, a piston rod end with an external thread, position sensing via proximity switch, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a) alongside ISO 14644-1 Class 5 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Filtration Group
77694656
Filtration Group 77694656 — Industrial Component
The Filtration Group part number 77694656 is an industrial component featuring a filtration rating of 25 µm and a permissible differential pressure of 20 bar. This manufacturer model, also designated as Filterelement 852690MIC25 852690MIC25 RMR690L20B HY 15519 RL-130-L-20-B, operates according to these specified technical parameters. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8124415
Ball screw axis ELGT-BS-90-750-10P
The Festo 8124415 is an electromechanical linear axis featuring a ball screw with a 16 mm screw diameter, 10 mm/U spindle pitch, and a 750 mm working stroke driven by a stepper or servo motor. This size 90 component incorporates a recirculating ball bearing guide supporting any mounting position, delivering a maximum speed of 0.5 m/s, a maximum acceleration of 15 m/s², a 150 µm reversing backlash, and a repetition accuracy of ±0.02 mm at a 100% duty cycle. Constructed in compliance with VDMA24364 Zone III LABS conformity, the unit achieves ISO 14644-1 Class 6 cleanroom suitability and features restricted metal variants to remain suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Parker
GTP M3020
Parker GTP M3020 — push in fitting 22 L (M30x2), 19,1mm GSP hose of Parker
The Parker GTP M3020 is a push in fitting designed for 22 L (M30x2) connections and 19,1mm GSP hose of Parker. This industrial component is identified by GTIN 4050571347604. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
8142911
Compact cylinder ADN-S-50-25-A-P-A-F1A
The Festo 8142911 industrial component is a double-acting piston and piston rod assembly featuring a 50 mm piston diameter, a 25 mm stroke, and an external thread at the piston rod end. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a pressure range of 0.04 MPa to 1 MPa, this unit delivers theoretical forces of 1057 N retracting and 1178 N advancing at 6 bar. It incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a) and ISO 14644-1 Class 5 cleanroom environments. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8141523
Solenoid valve VUVG-B10-P53U-ZT-F-1T1L-F1A
The Festo part number 8141523 is a 10 mm electrical 5/3-way pressurized industrial component featuring a piston gate valve structural design with soft sealing and an indeterminate overlap lap. This piloted unit operates on 24V DC with an operating pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar), delivering a normal nominal flow rate of 200 l/min through a flange pneumatic working port and external pilot air supply. It includes a mechanical spring reset method, adjustable exhaust air function, reversible flow direction, LED signal status display, and both detenting and non-detenting manual override options in any mounting position. Certified as c UL us - recognized (OL) with an IP40 degree of protection, this component is ready for integration. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8124414
Ball screw axis ELGT-BS-90-700-10P
The Festo 8124414 is an electromechanical linear axis featuring an integrated ball screw with a 16 mm screw diameter, a 10 mm/U spindle pitch, and a 700 mm working stroke. Built with a recirculating ball bearing guide and a size 90 structural design, this unit supports a maximum speed of 0.5 m/s, a maximum rotational speed of 3000 rpm, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.02 mm with 0 mm stroke reserve and 150 µm reversing backlash. It operates at a 100% duty cycle in any mounting position, meets VDMA24364 Zone III LABS conformity, achieves ISO 14644-1 Class 6 cleanroom suitability, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) while excluding specific metals by mass. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8142910
Compact cylinder ADN-S-50-20-A-P-A-F1A
The Festo 8142910 is a double-acting industrial component featuring a 50 mm piston diameter and a 20 mm stroke with a piston rod at one end. It operates within a pressure range of 0.04 MPa to 1 MPa (0.4 bar to 10 bar / 5.8 psi to 145 psi) using compressed air according to ISO 8573-1:2010 [7:4:4] and includes elastic cushioning rings at both ends for 1 J impact energy. This unit provides position sensing via proximity switch, achieves cleanroom suitability Class 5 per ISO 14644-1, and is suitable for lithium-ion battery manufacturing with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8141522
Solenoid valve VUVG-B10-P53E-ZT-F-1T1L-F1A
The Festo 8141522 is an electrical 5/3 exhausted piston gate valve featuring a 10 mm valve size, a nominal flow rate of 200 l/min, and an operating voltage of 24V DC. Operating at pressures from -0.9 bar to 10 bar, this piloted component includes a soft sealing principle, mechanical spring reset, adjustable exhaust air function, and a signal status display LED. It utilizes a flange pneumatic working port, external pilot air supply port, and offers detenting or non-detenting manual override with any mounting position and c UL us recognition. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
8124413
Ball screw axis ELGT-BS-90-650-10P
This Festo electromechanical linear axis features a size 90 structural design with a ball screw, 650 mm working stroke, 16 mm screw diameter, and 10 mm/U spindle pitch. It accommodates a stepper motor or servo motor with a maximum rotational speed of 3000 rpm, achieving a maximum speed of 0.5 m/s, maximum acceleration of 15 m/s², and repetition accuracy of ±0.02 mm. The unit includes a recirculating ball bearing guide, 0 mm stroke reserve, 150 �m reversing backlash, 100% duty cycle, and operates in any mounting position while meeting ISO 14644-1 Class 6 cleanroom and VDMA24364 Zone III LABS conformity with reduced Cu/Zn/Ni suitability for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8142909
Compact cylinder ADN-S-50-15-A-P-A-F1A
The Festo 8142909 is a double-acting industrial component featuring a 50 mm piston diameter, a 15 mm stroke, and an external thread piston rod at one end with piston rod structural design. Operating on compressed air as per ISO 8573-1:2010 [7:4:4] within a 0.4 bar to 10 bar range, it delivers theoretical forces of 1057 N retracting and 1178 N advancing at 6 bar. This unit includes elastic cushioning rings at both ends, accommodates any mounting position, provides position sensing via proximity switch, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values (F1a) and ISO Class 5 cleanroom compliance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →