Global industrial sourcing · Houston, Texas info@mropartsrfq.com

Industrial sourcing catalog

Search by Manufacturer Part Number

Browse verified product records and request commercial availability, lead time and technical documentation.

235,740 results
Festo 549566

Festo

549566

Hinge cylinder DWA-63-125-Y

This Festo industrial component, part number 549566, is a double-acting piston cylinder featuring a 63 mm piston diameter, a 125 mm stroke, and an M16x1.5 piston rod thread with a rod clevis and swivel mounting on the bearing cap. It operates at pressures from 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] with possible oil lubrication, and incorporates adjustable pneumatic cushioning and integrated flow control at both ends. The unit is rated for an ambient temperature range of -10 °C to 60 °C, delivers a theoretical retracting force of 1682 N at 6 bar, and has no position sensing. Submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 550503

Festo

550503

Air preparation combination unit MSB6N-1/2:C3J3D7A1F3-WP

The Festo part number 550503 is a size 6 MS series industrial component featuring a structural design that integrates a branching module, soft-start valve, pressure switch, on/off valve, and filter regulator with a pressure gauge. Operating at 4.5 bar to 10 bar with a pressure regulation range of 4 bar to 9 bar, this unit delivers a normal nominal flow rate of 3000 l/min using compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases. It includes a 5 µm filtration grade, manual rotating condensate drain, plastic bowl guard, and a 24 V DC 2.5 W coil. Submit your exact part number, quantity, and application requirements to receive a formal quotation for this component.

View product details →
Festo 549707

Festo

549707

Hinge cylinder DWB-50-50-Y-AB

The Festo part number 549707 is a double-acting industrial component featuring a 50 mm piston diameter, a 50 mm stroke, and an external piston rod thread of M16x1.5 with an integrated rod clevis. This unit operates within a pressure range of 1 bar to 10 bar utilizing compressed air as per ISO 8573-1:2010 [7:4:4], and includes adjustable pneumatic cushioning at both ends alongside integrated flow control. Designed with a 19.5 mm wide rod clevis and swivel mounting on the bearing cap, it delivers a theoretical retracting force of 990 N at 6 bar across an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →
Festo 547339

Festo

547339

Air solenoid valve CPVSC1-M4H-D-T-Q3C

The Festo 547339 is an electrical 10 mm piston gate valve featuring a 2/2-way, closed, monostable function with a soft sealing principle and positive overlap lap. This component delivers a normalized nominal flow rate of 150 l/min at an operating pressure range of -0.9 bar to 7 bar using an external pilot air supply port operating from 0.3 MPa to 0.7 MPa. Rated to IP40 protection with c UL us recognition, the unit includes a pneumatic spring reset method, non-detenting manual override, and QS-3 pneumatic working ports for 5V DC operation in any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote.

View product details →

SMC

55-CXSL10-20

SMC 55-CXSL10-20 — Pneumatic Cylinder

The SMC 55-CXSL10-20 is a pneumatic cylinder manufactured by SMC. Please submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 549706

Festo

549706

Hinge cylinder DWA-50-150-Y-AB

The Festo 549706 is a double-acting industrial component featuring a 50 mm piston diameter and a 150 mm stroke, operating within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4]. This structural design incorporates a piston, a piston rod with an M16x1.5 external thread and rod clevis, a 16 mm wide swivel mounting on the bearing cap, and a cylinder barrel that supports any mounting position. Integrated flow control at both ends and adjustable pneumatic cushioning at both ends regulate velocity and absorb 0.7 J of impact energy across a 20 mm cushioning length, while position sensing is achieved via a proximity switch. Submit the exact part number, quantity, and application requirements to request a quote for this component.

View product details →
ARGO HYTOS 22499700

ARGO HYTOS

22499700

ARGO HYTOS 22499700 — Pressure Relief Valve

This ARGO HYTOS industrial component, part number 22499700, is manufactured to the precise specifications associated with the brand. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →
Festo 549565

Festo

549565

Hinge cylinder DWA-63-100-Y

The Festo part number 549565 is a double-acting industrial component featuring a 63 mm piston diameter and a 100 mm stroke with an M16x1.5 piston rod thread. This unit includes a piston rod with a rod clevis, swivel mounting on the bearing cap, integrated flow control at both ends, and adjustable pneumatic cushioning at both ends. It operates within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] and delivers a theoretical retracting force of 1682 N at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 550502

Festo

550502

Air preparation combination unit MSB6N-1/2:C3J2M1D7A1F3-WP

The Festo part number 550502 is a Size 6 industrial component from the MS series featuring a branching module, soft-start valve, pressure switch, on/off valve, filter regulator with a pressure gauge, and standard mist lubricator. It operates within a 4.5 bar to 10 bar pressure range, provides a regulation range of 4 bar to 9 bar, and delivers a normal nominal flow rate of 2300 l/min for compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases. The unit incorporates a 40 µm filtration grade, fully automatic condensate drain, rotary knob actuator lock with detent, plastic bowl guard, and a 24 V DC, 2.5 W coil. Submit the exact part number, quantity, and application requirements to receive a quote for this component.

View product details →
Festo 547338

Festo

547338

Air solenoid valve CPVSC1-M4H-J-T-M5

The Festo part number 547338 is a 5/2-way bistable industrial component featuring a 10 mm valve size, a piston gate valve structural design, and a soft sealing principle with positive overlap. This electrically actuated component delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports, operating at pressures ranging from -0.9 bar to 7 bar with a 5V DC operating voltage. Certified as c UL us recognized (OL) with an IP40 degree of protection, it utilizes an external pilot air supply port with pilot pressures between 3 bar and 7 bar, along with a non-detenting manual override and non-throttled exhaust air function. Submit the exact part number, quantity, and application requirements to request a quote for this component.

View product details →
Festo 549696

Festo

549696

Quarter turn actuator DAPS-2880-090-RS4-F16

The Festo 549696 is a single-acting industrial component featuring a size 2880 valve actuator with a kinematic yoke system, F16 flange hole pattern, and ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR). Operating at a nominal pressure of 0.56 MPa (5.6 bar) with an operating pressure range of 0.56 MPa to 0.84 MPa (5.6 bar to 8.4 bar) and a 0.56 MPa (5.6 bar) connection pressure for spring force, it delivers a 90-degree swivel angle, closes to the right, and achieves up to SIL 2 low demand mode safety integrity with ATEX CE marking. This un-cushioned unit operates in any mounting position with a maximum swivel frequency of 1 Hz at 6 bar, featuring a 49.5 mm shaft connection depth, a 0° end-position adjusting range of -5 degrees to 5 degrees, and a nominal swivel angle end-position adjusting range of 85 degrees to 95 degrees without position sensing. Submit the exact part number, quantity, and application requirements for a quote.

View product details →
Festo 549564

Festo

549564

Hinge cylinder DWA-63-75-Y

The Festo 549564 is a double-acting industrial component featuring a 63 mm piston diameter, a 75 mm stroke, and an M16x1.5 piston rod thread with an external rod clevis and swivel mounting on the bearing cap. Operating at pressures from 1 bar to 10 bar using compressed air per ISO 8573-1:2010 [7:4:4], it delivers a theoretical retracting force of 1682 N at 6 bar. This unit incorporates adjustable pneumatic cushioning at both ends with a 20 mm cushioning length, integrated flow control at both ends, and an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a formal quote.

View product details →
Festo 550501

Festo

550501

Air preparation combination unit MSB6N-1/2:C3J2D7A1F3-WP

The Festo 550501 is a Size 6 MS series industrial component featuring a structural design with a branching module, soft-start valve, pressure switch, on/off valve, and a filter regulator with a pressure gauge. It operates within a 4.5 bar to 10 bar operating pressure range, delivering a normal nominal flow rate of 3100 l/min utilizing compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases. This unit is equipped with a fully automatic condensate drain, a 40 µm filtration grade, a plastic bowl guard, and a rotary knob actuator lock with detent that can be closed with accessories. Submit the exact part number, quantity, and application requirements to request a quote.

View product details →

SMC

55-CXSJL32-75

SMC 55-CXSJL32-75 — Pneumatic Cylinder

The SMC 55-CXSJL32-75 is a pneumatic cylinder manufactured by SMC. This component corresponds directly to part number 55-CXSJL32-75. Submit your exact part number, quantity, and application requirements to request a quote for this item.

View product details →
AC-Motoren ACMAAS3A022001W00002

AC-Motoren

ACMAAS3A022001W00002

AC-Motoren ACMAAS3A022001W00002 — Asynchronous-Motor ACM 200 LA 2/PHE

The AC-Motoren Asynchronous-Motor ACM 200 LA 2/PHE is a regular 2-pole industrial component featuring frame size 200 and B5 mounting. It delivers a power output of 30 kW at 400/690 V and a speed of 2960 1/min under S1 duty type. This unit is built with insulation class F and protection class IP55. Submit the exact part number, quantity, and application requirements to receive a formal quote.

View product details →
Festo 547337

Festo

547337

Air solenoid valve CPVSC1-M4H-M-T-M5

The Festo part number 547337 is an electrical 5/2-way monostable industrial component featuring a 10 mm piston gate valve design with soft sealing and positive overlap. Operating at 5V DC within a pressure range of -0.09 MPa to 0.7 MPa, this piloted unit delivers a normal nominal flow rate of 170 l/min through M5 pneumatic working ports, utilizing an external pilot air supply port and a pneumatic spring reset method. It holds c UL us recognition, achieves an IP40 degree of protection, and includes a non-detenting manual override while supporting any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.

View product details →
Festo 549695

Festo

549695

Quarter turn actuator DAPS-2880-090-RS3-F16

The Festo part number 549695 is a single-acting industrial component featuring a size 2880 valve actuator, a kinematic yoke system structural design, and an F16 flange hole pattern. This unit operates with a swivel angle of 90 degrees, closes to the right, and includes an end-position adjusting range from -5 to 5 degrees at 0 degrees and 85 to 95 degrees at the nominal angle. Certified up to SIL 2 low demand mode with ATEX EU explosion protection directive conformity, it operates at pressures between 0.42 MPa and 0.84 MPa with a 49.5 mm shaft connection depth and ISO 5211 valve standard compliance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →
Festo 549563

Festo

549563

Hinge cylinder DWA-63-50-Y

The Festo 549563 is a double-acting industrial component featuring a 63 mm piston diameter, a 50 mm stroke, and an M16x1.5 piston rod thread with an external rod clevis. This unit operates within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] and includes adjustable pneumatic cushioning at both ends with integrated flow control. The structural design incorporates a cylinder barrel, piston, rod clevis, and a swivel mounting on the bearing cap enabling installation in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →
Festo 550500

Festo

550500

Air preparation combination unit MSB6N-1/2:C3J1M1D7A1F3-WP

The Festo part number 550500 is an industrial component of size 6 within the MS series, featuring a structural design that integrates a branching module, soft-start valve, pressure switch, on/off valve, filter regulator with a pressure gauge, and standard mist lubricator. It operates within an operating pressure range of 4.5 bar to 10 bar and a pressure regulation range of 4 bar to 9 bar, delivering a normal nominal flow rate of 2300 l/min for compressed air as per ISO 8573-1:2010 [7:4:4] or inert gases. Equipped with a manual rotating condensate drain, a plastic bowl guard, and a 24 V DC 2.5 W coil, this unit maintains constant output pressure with primary pressure compensation, secondary exhausting, and return flow characteristics. Submit the exact part number, quantity, and application requirements to receive a formal quote.

View product details →
Festo 547336

Festo

547336

Air solenoid valve CPVSC1-M4H-N-T-M5O

The Festo 547336 is an electrical 10 mm piston gate valve featuring a 3/2-way monostable open valve function with a soft sealing principle and positive overlap lap. It delivers a normal nominal flow rate of 170 l/min through an M5 pneumatic working port, operating at pressures from -0.9 bar to 7 bar with a 5V DC operating voltage and external pilot air supply port. This c UL us recognized component includes an IP40 degree of protection, pneumatic spring reset method, non-detenting manual override, and supports any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.

View product details →