Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.

Festo
1210305
Selector plate VABF-C8-12-P6-G18-Z
The Festo 1210305 industrial component features a wrought aluminum alloy plate construction with a corrosion resistance class (CRC) of 0 for environments with no corrosion stress. This RoHS compliant part adheres to VDMA24364-B1/B2-L LABS (PWIS) conformity standards and requires a maximum tightening torque of 0.6 Nm both generally and for valve mounting. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
12635
Hollow bolt VT-1/4-AJ-P
The Festo Hollow bolt VT-1/4-AJ-P, designated by part number 12635, features chromated steel hollow bolt material and complies with RoHS material regulations. This industrial component conforms to LABS (PWIS) VDMA24364-B1/B2-L standards as documented in the official Festo EN-US data sheet. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
GGB
SBC WITH GAR-MAX
GGB SBC WITH GAR-MAX — Fiber-Reinforced Composite Bearings
The GGB SBC with GAR-MAX belongs to the Fiber-Reinforced Composite Bearings product family and provides very good dry operation alongside fair lubricated and greased operation. This RoHS compliant component features machinability status requiring consultation with an Applications Engineer, while standard sizes are not-applicable. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
1210126
Parallel kit EAMM-U-60-D32-55A-91
This Festo industrial component, part number 1210126, features a size 60 frame with a 1:1 gear ratio, a transferable torque of 3 Nm, and a maximum rotational speed of 6000 rpm. The unit weighs 1050 g, incorporates an actuator interface code of D32B with a motor-in interface code of 55A, and is built with a mass moment of inertia of 26.7 kgmm² alongside a no-load driving torque of 0.07 Nm. It operates within an ambient temperature range of -10 °C to 60 °C, supports storage temperatures from -25 °C to 60 °C at 0 to 95% relative air humidity, meets IP40 and VDMA24364 Zone III LABS conformity, and complies with RoHS material standards in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
12634
Hollow bolt VT-1/8-AJK-P
The Festo hollow bolt VT-1/8-AJK-P features a chromated steel construction and adheres to VDMA24364-B1/B2-L LABS (PWIS) conformity standards. This component complies with RoHS material regulations as outlined in the official Festo data sheet. Submit your required quantity and application details for an RFQ on part number 12634.
View product details →
Festo
1210037
Semi-rotary actuator DFPB-10-090-S6-F03
The Festo 1210037 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F03 flange hole pattern, and a 90-degree swivel angle without cushioning. Operating at pressures up to 8 bar with a nominal working pressure of 5.6 bar, this unit conforms to VDI/VDE 3845 (NAMUR) for valve connection and supports any assembly position using compressed air in accordance with ISO 8573-1:2010 [7:4:4]. It is rated for SIL 3 Low Demand mode and carries ATEX certifications for gas (II 2G c T4 X) and dust (II 2D c 125°C X) within an ambient temperature range of -20°C to +80°C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
12633
Hollow bolt VT-1/8-AJ-P
The Festo Hollow bolt VT-1/8-AJ-P is an industrial component featuring chromated steel hollow bolt material and RoHS compliant material construction. This part meets VDMA24364-B1/B2-L LABS (PWIS) conformity standards per the official Festo data sheet. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
GGB
MULTIFIL
GGB MULTIFIL — Fiber-Reinforced Composite Bearings
The GGB MULTIFIL is a fiber-reinforced composite bearing manufactured by GGB with very good performance ratings for dry, lubricated, and greased operation. This RoHS-compliant component features machinability status available through consultation with an applications engineer, while standard sizes are not specified. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
12618
Air solenoid valve MFH-5-1/4-S-NPT
The Festo 12618 is an electrical 5/2-way monostable industrial component featuring a plate seat structural design and a nominal width of 7 mm. This piloted valve operates across a pressure range of 0 bar to 8 bar, delivers a normal nominal flow rate of 1000 l/min through 1/4 NPT pneumatic working ports, and utilizes an IP65 degree of protection with an adjustable exhaust air function. Operating voltage is supplied via a solenoid coil ordered separately, and the unit includes a detenting manual override, mechanical spring reset, and external pilot air supply. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
1210036
Semi-rotary actuator DFPB-10-090-S5-F03
The Festo 1210036 is a single-acting rack and pinion industrial component featuring an actuator size of 10, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and a maximum working pressure of <= 8 bar, this unit operates with compressed air according to ISO 8573-1:2010 [7:4:4] in any assembly position. Certified for hazardous environments with ATEX category Gas II 2G and Dust II 2D ratings within an ambient temperature range of -20°C to +80°C, it includes a NAMUR-standard valve connection and supports up to SIL 3 Low Demand mode. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
1210035
Semi-rotary actuator DFPB-10-090-S4-F03
The Festo 1210035 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle without cushioning or position detection. Built with a valve connection based on VDI/VDE 3845 (NAMUR), it operates at a nominal working pressure of 5.6 bar and a maximum working pressure of 8 bar using compressed air in accordance with ISO 8573-1:2010 [7:4:4], while supporting lubricated operation if subsequently required. This unit offers ATEX certification for Gas (II 2G c T4 X) and Dust (II 2D c 125°C X) with an explosion-proof ambient temperature range of -20°C to +80°C and achieves Safety Integrity Level (SIL) up to SIL 3 in Low Demand mode in any assembly position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
GGB
MLG
GGB MLG — Fiber-Reinforced Composite Bearings
The GGB MLG part number designates a fiber-reinforced composite bearing from official GGB product records featuring very good dry operation performance and good lubricated operation, alongside poor greased operation and RoHS compliance. This component exhibits a coefficient of friction ranging from 0.05 to 0.30*, with machinability subject to consultation with an applications engineer and standard sizes available. Please submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
12617
Air solenoid valve MFH-5-1/8-S-NPT
The Festo 12617 is an electrical, 5/2-way monostable industrial component featuring a plate seat structural design and a 26 mm width. This piloted valve operates across a pressure range of 0 MPa to 1 MPa (0 bar to 10 bar) with a normal nominal flow rate of 500 l/min and incorporates an external pilot air supply port alongside an adjustable exhaust air function. Certified as c UL us - recognized (OL) with an IP65 degree of protection, it utilizes soft sealing and requires a solenoid coil ordered separately for its operating voltage. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
1210034
Semi-rotary actuator DFPB-10-090-S3-F03
The Festo 1210034 is a single-acting rack and pinion industrial component featuring a size 10 actuator, an F03 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a nominal working pressure of 5.6 bar and maximum working pressures up to 8 bar, this unit accommodates compressed air media meeting ISO8573-1:2010 [7:4:4] standards and supports lubricated operation. It includes a VDI/VDE 3845 NAMUR-compliant valve connection, features ATEX category II 2G and II 2D gas and dust explosion protection for ambient temperatures between -20°C and 80°C, and provides Safety Integrity Level up to SIL 3 in Low Demand mode without position detection. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Gewiss
GW16204XE
LUX PLATE - IN METAL - 4 MODULES - SOFT COPPER - INNER FRAME MATT SOFT COPPER - CHORUSMART | Gewiss
The Gewiss GW16204XE is a soft copper opaque metal LUX component featuring four modules and an Electrocod of 0110. This EN 60669-1 compliant part accommodates support codes GW16804 and GW16804N, with a glow wire test rating of 650 °C and thermo-pressure ball testing at 70 °C under HS code 85389099. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
GGB
HSG
GGB HSG — Fiber-Reinforced Composite Bearings
The GGB HSG belongs to the Fiber-Reinforced Composite Bearings product family, featuring very good dry operation alongside fair lubricated and greased operation capabilities. This RoHS compliant component is available in standard sizes, with machining subject to consultation with an Applications Engineer. Submit the exact part number, quantity, and application requirements to request a formal quote for this GGB product.
View product details →
Festo
12612
Suction cup VAS-8-M5-S
The Festo part number 12612 is an industrial component featuring a round, standard suction cup with an 8 mm diameter, a 5.5 mm effective suction diameter, and a 2 mm nominal size. Constructed with a TPE-U(PU) transparent suction cup of 60 +/- 5 Shore hardness and a brass screw-in stud, this assembly utilizes an M5 mounting thread, M5 suction cup mounting, and a PK-3 side vacuum connection. It operates with atmospheric air based on ISO 8573-1:2010 [7:-:-] within an ambient temperature range of -20 to 60 °C, delivering a breakaway force and retention force of 1.6 N at 70% vacuum and nominal operating pressure. The materials conform to RoHS. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
1209006
Centering ring EAML-80-6-80
This Festo industrial component, part number 1209006, features a holder 1 diameter of 38 mm and a holder 2 diameter of 80 mm with actuator interface code M80 and coupling housing interface code 80A. Weighing 23 g and compliant with RoHS materials standards, it conforms to VDMA24364-B2-L LABS (PWIS) requirements and can be installed in any mounting position. The part operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
GGB
HPMB
GGB HPMB — Fiber-Reinforced Composite Bearings
The GGB HPMB is a fiber-reinforced composite bearing featuring very good dry operation capability alongside fair lubricated operation, while greased operation is not recommended. This RoHS-compliant component includes applicable machinability and possesses static and dynamic unit bearing properties along with normal surface expansion and hardness ratings. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
12611
Indicating insert MCL
The Festo part number 12611 is an industrial component manufactured with a reinforced PA6 housing and a product weight of 13 g. This device features a Type A plug electrical connection as per DIN EN 175301-803, operating on a nominal voltage of 24 V DC or 24 V AC within a mains frequency range of 0 Hz to 60 Hz and permissible voltage fluctuations of +/-15%. It achieves an IP65 degree of protection according to IEC 60529, operates in ambient temperatures from -20 °C to 60 °C, and conforms to VDMA24364-B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →