Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
153368
Push-in T-connector QSMT-4-3
The Festo 153368 is a mini T-shaped industrial component featuring a push-pull structural design with 1 supply line and 2 outlets configured for 4 mm and 3 mm outside diameter pneumatic tubing. This unit operates within a temperature range of -10 °C to 80 °C, supporting compressed air media per ISO 8573-1:2010 [7:-:-] with an operating pressure of -0.095 MPa to 0.6 MPa across the entire temperature range and up to 1.4 MPa under temperature-dependent conditions. Weighing 3.5 g with a low corrosion stress rating (CRC 1) and VDMA24364-B1/B2-L LABS conformity, the component allows lubricated operation and can be mounted in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
153022
Push-in fitting QSF-1/8-4-B
The Festo part number 153022 is a standard straight industrial component featuring a 3 mm nominal width, a 14.9 mm tubing insertion depth, and an external hexagon SW14 type of mounting with a nominal tightening torque of 7 Nm at a ±20% tolerance. Operating via the push-pull principle with a coated seal on the screwed plug, this 13 g component functions with compressed air as per ISO 8573-1:2010 [7:-:-] or liquid, ice-free water across an ambient temperature range of -10 °C to 80 °C and supports lubricated operation. It achieves a corrosion resistance class of 1 with VDMA24364-B1/B2-L LABS conformity and can be installed in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
151694
Proportional directional control valve MPYE-5-1/4-010-B
The Festo 151694 is a 5/3-way closed piston gate valve featuring an 8 mm nominal width and direct electrical actuation with a magnetic spring reset. Operating at pressures from 0 to 1 MPa (0 to 10 bar), this component delivers a normal nominal flow rate of 1400 l/min, a cut-off frequency of 80 Hz, and a maximum hysteresis of 0.4% within a 17 V to 30 V DC operating voltage range. It incorporates reverse polarity protection for all electrical connections, 0 to 10 V setpoint/actual values, and a safety function that approaches the blocked mid-position if the power supply cable breaks. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this industrial component.
View product details →
Festo
153216
Multiple distributor QSLV2-3/8-8
The Festo 153216 is a standard industrial component featuring a 4.3 mm nominal width, 18.1 mm tubing insertion depth, and a push-pull structural design with two outlets and one supply line. It operates with compressed air or liquid water across an ambient temperature range of -10 °C to 80 °C and supports a nominal tightening torque of 15.5 Nm with a ±20% tolerance. This part weighs 54 g, achieves a corrosion resistance class of 1, and utilizes a coated screwed plug seal. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
153021
Push-in fitting QS-1/2-12-I
The Festo 153021 is a standard straight industrial component featuring an 8.4 mm nominal width, a 23.3 mm tubing insertion depth, and an R1/2 external thread for pneumatic connection 1 alongside a 12 mm outside diameter pneumatic tubing connection 2. It utilizes a push-pull structural design with a coated screwed plug seal, internal hexagon AF 8 mounting, and operates across an ambient temperature range of -10 °C to 80 °C with compressed air or liquid water. This unit weighs 45 g, has a CRC rating of 1, and supports operating pressures from -0.095 MPa to 0.6 MPa for water or up to 1.4 MPa depending on temperature. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
153367
Push-in T-connector QSMT-6
The Festo 153367 is a mini T-shaped industrial component featuring a push-pull structural design with a 3.4 mm nominal width, 11.9 mm tubing insertion depth, and one supply line to two outlets for 6 mm outside diameter pneumatic tubing. This part operates with compressed air conforming to ISO 8573-1:2010 [7:-:-] across a temperature-dependent pressure range of -0.95 bar to 14 bar and an ambient temperature range of -10 °C to 80 °C, supporting lubricated operation and featuring a blue releasing ring with a total product weight of 5.3 g. It offers a low corrosion stress rating of CRC 1 and VDMA24364-B1/B2-L LABS conformity while supporting any mounting position. Submit the exact part number, quantity, and application requirements to request a formal quote for this pack size of 10.
View product details →
Festo
151693
Proportional directional control valve MPYE-5-1/8-HF-010-B
The Festo 151693 is a 5/3-way closed piston gate valve featuring a 6 mm nominal width, hard sealing principle, and direct electrical actuation with reverse polarity protection across all electrical connections. It operates within a 0 bar to 10 bar pressure range, delivers a normal nominal flow rate of 700 l/min, and incorporates a magnetic spring reset method alongside a safety position that approaches the blocked mid-position upon a power supply cable break. Additional operational parameters include a 0 V to 10 V setpoint/actual voltage range, 95 Hz cut-off frequency, 0.4% maximum hysteresis, and any mounting position compatibility. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Danfoss Power Solutions
157B6110
Danfoss Power Solutions 157B6110 — Industrial Component
This Danfoss Power Solutions industrial component, designated by part number 157B6110, is available for procurement. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
153215
Multiple distributor QSLV2-1/4-8
The Festo 153215 is a standard industrial component featuring one supply line and two outlets with a nominal width of 4.3 mm and an 18.1 mm tubing insertion depth. Utilizing a push-pull structural design and a coated screwed plug seal, this part weighs 47 g and accommodates compressed air or liquid water within an ambient temperature range of -10 °C to 80 °C. It operates at pressures from -0.095 MPa to 0.6 MPa across its full temperature range, or up to 1.4 MPa under temperature-dependent conditions, using a nominal tightening torque of 9 Nm with a ±20% tolerance. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this pack size of 1.
View product details →
Festo
153020
Push-in fitting QS-3/8-12-I
The Festo 153020 is a straight industrial component featuring a push-pull structural design with an 8.4 mm nominal width and a 23.3 mm tubing insertion depth, configured with an R3/8 external thread and a connection for 12 mm outside diameter pneumatic tubing. This standard-sized unit utilizes a coated screwed plug with an internal hexagon AF 8 mounting type, allowing installation in any mounting position while operating across a temperature range of -10 °C to 80 °C with a product weight of 31 g. It supports compressed air per ISO 8573-1:2010 [7:-:-] and liquid water up to 0.6 MPa at 50 °C, featuring operating pressures from -0.095 MPa to 1.4 MPa depending on temperature and accommodating lubricated operation with a CRC 1 corrosion resistance rating. Submit the exact part number, quantity, and application requirements to receive a formal quotation for a pack size of 10.
View product details →
Gewiss
GW16129TN
ONE INTERNATIONAL PLATE - IN TECHNOPOLYMER - 2+2+2+2 MODULES VERTICAL - TONER BLACK - CHORUSMART | Gewiss
The Gewiss GW16129TN is a vertical 2+2+2+2 module support frame from the ONE International family, manufactured in glossy toner black technopolymer. This component complies with EN 60669-1, features an Electrocod of 0110 with a commodity code of 85389099, and undergoes a glow wire test at 650 °C alongside a ball thermo-pressure test at 70 °C. Designed for round or square boxes, it is compatible with support codes GW16821, GW16822, and GW16823. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
153366
Push-in T-connector QSMT-4
The Festo 153366 is a mini T-shaped industrial component featuring a push-pull structural design with a nominal width of 2.4 mm and an 11.6 mm tubing insertion depth. This pack of 10 units connects one supply line to two outlets for 4 mm outside diameter pneumatic tubing, operating with compressed air according to ISO 8573-1:2010 [7:-:-] across a temperature-dependent pressure range of -0.095 MPa to 1.4 MPa. The unit weighs 3.3 g, incorporates a blue releasing ring, and maintains a corrosion resistance class of 1 under an ambient temperature range of -10 °C to 80 °C in any mounting position. Submit part number 153366 with your required quantity and application details to receive a quote.
View product details →
Festo
151692
Proportional directional control valve MPYE-5-1/8-LF-010-B
The Festo 151692 is an electrical 5/3-way closed piston gate valve featuring a 4 mm nominal width, direct control, and a hard sealing principle mountable in any position. Operating across a pressure range of 0 bar to 10 bar (0 MPa to 1 MPa), it delivers a normal nominal flow rate of 350 l/min, a cut-off frequency of 95 Hz, and a maximum hysteresis of 0.4% with 0 to 10 V setpoint and actual values. This unit operates on a DC voltage range of 17 V to 30 V with 5% residual ripple, includes reverse polarity protection for all electrical connections, utilizes a magnetic spring reset, and defaults to a blocked mid-position if the power supply cable breaks. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
153019
Push-in fitting QS-3/8-10-I
The Festo 153019 is a straight industrial component featuring a push-pull structural design with a standard size, a nominal width of 6.3 mm, and a tubing insertion depth of 20.7 mm. It connects an R3/8 external thread to a 10 mm outside diameter pneumatic tubing, utilizing a coated screwed plug with an internal hexagon AF 6 mounting type and supporting any mounting position at a weight of 26 g. This part operates with compressed air according to ISO 8573-1:2010 [7:-:-] or liquid, ice-free water, offering an operating pressure of -0.095 MPa to 0.6 MPa across the entire temperature range and -0.095 MPa to 1.4 MPa depending on the temperature, within an ambient temperature range of -10 °C to 80 °C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
153214
Multiple distributor QSLV2-1/8-8
The Festo part number 153214 is a standard industrial component featuring a 4.2 mm nominal width, 18.1 mm tubing insertion depth, push-pull structural design, and 2 outlets connected to 1 supply line with a coated seal on the screwed plug. Weighing 44 g with a low corrosion stress rating (CRC 1) and VDMA24364-B1/B2-L LABS conformity, it supports any mounting position, lubricated operation, and a nominal tightening torque of 7 Nm with a ±20% tolerance. Operating parameters include an ambient temperature range of -10 °C to 80 °C and an operating pressure of -0.095 MPa to 1.4 MPa for temperature-dependent conditions, or up to 0.6 MPa for water media between 0 °C and 50 °C, utilizing compressed air as per ISO 8573-1:2010 [7:-:-] or ice-free liquid water. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
153365
Push-in T-connector QSMT-3
The Festo 153365 is a mini T-shaped industrial component featuring a 1.6 mm nominal width, one supply line, and two outlets designed for 3 mm outside diameter pneumatic tubing via the push-pull principle with a blue releasing ring. This part operates with compressed air according to ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C, supporting pressures from -0.095 MPa to 0.6 MPa universally and up to 1.4 MPa depending on temperature. Supplied in a pack size of 10 with a product weight of 1.7 g each, the unit offers any mounting position, lubricated operation capability, and a low corrosion stress classification of CRC 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
153018
Push-in fitting QS-1/4-10-I
The Festo 153018 is a straight industrial component featuring a push-pull structural design with a 6.3 mm nominal width and a 20.7 mm tubing insertion depth. It connects an external thread R1/4 to pneumatic tubing with a 10 mm outside diameter using an internal hexagon AF 6 mounting type and a coated screwed plug seal. This part operates with compressed air or liquid water within an ambient temperature range of -10 °C to 80 °C and supports lubricated operation across various pressure ranges up to 1.4 MPa. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
153213
Multiple distributor QSLV2-1/4-6
The Festo 153213 is a standard industrial component featuring a structural push-pull design with 1 supply line and 2 outlets, a 3.2 mm nominal width, and a 17 mm tubing insertion depth. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] or liquid, ice-free water across an ambient temperature range of -10 °C to 80 °C, utilizing a coated seal on the screwed plug with a nominal tightening torque of 9 Nm (±20%). Weighing 34 g with a corrosion resistance class of 1 and VDMA24364-B1/B2-L LABS conformity, this part supports lubricated operation and allows mounting in any position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
151691
Plug socket with cable KMEB-1-230AC-5
The Festo 151691 is a 230 g industrial component featuring an any mounting position and an IP65 degree of protection as per IEC 60529. This assembly includes an angled 90° socket connection designed to EN 175301-803 form C with 3 pins, mounting via an M2.5 central screw onto an air solenoid valve, and a 5 m standard cable with a 5.2 mm diameter and 3 x 0.5 mm² wire ends featuring wire ferrules. Operating at a nominal AC voltage of 230 V with 4 kV surge resistance, it incorporates a protective earth connection and an open-end secondary electrical connection. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
153364
Push-in T-fitting QSMTL-1/8-6
The Festo part number 153364 is a mini L-shaped industrial component featuring an additional push-in connector, lengthwise design, 1 supply line, and 2 outlets with a 3.3 mm nominal width and 11.5 mm tubing insertion depth. Utilizing a push-pull structural design and a coating on the screwed plug, this unit operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C and supports lubricated operation. It weighs 8.5 g, has a CRC rating of 1 for low corrosion stress, features VDMA24364-B1/B2-L LABS conformity, and requires a nominal tightening torque of 7 Nm with a ±20% tolerance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →