Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo industrial component, part number 534494, features a reinforced polyamide housing with steel screws and NBR seals, measuring 33 mm in width, 41 mm in height, 20 mm in length, and weighing 15 g. Designed for CAT.5 Ethernet cables with individual wire diameters of 0.89 to 0.99 mm (AWG 24-26, fine wire) and cable diameters between 4 mm and 5.4 mm, this unit provides IP65 and IP67 degrees of protection as per IEC 60529 alongside PELV protection against direct and indirect contact. It operates within an ambient temperature range of -5 °C to 60 °C, a storage temperature range of -20 °C to 70 °C, 0 to 90% non-condensing relative air humidity, and satisfies VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 533448 is a single-acting industrial component featuring a kinematic yoke system with a 0180 valve actuator size and a 90-degree swivel angle. Operating within a pressure range of 0.35 MPa to 0.84 MPa and supporting SIL 2 low demand mode, this unit incorporates F07 and F10 flange hole patterns alongside a VDI/VDE 3845 NAMUR standard valve connection. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo 535502 double-acting industrial component features a 50 mm piston diameter, a 71 mm complete stroke, a 50 mm clamping stroke, and a right-hand 90 deg +/- 2 deg swivel angle with an M10 piston rod thread. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a 2 bar to 10 bar pressure range, this unit utilizes elastic cushioning rings at both ends, accommodates any mounting position, and delivers effective clamping forces of 271 N at 2 bar and 508 N at 4 bar. Position sensing occurs via a proximity switch, while structural design incorporates a piston, piston rod, and cylinder barrel with variants for weld spatter protection and dust protection, an ambient temperature range of -10 °C to 80 °C, and CRC 2 moderate corrosion resistance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 533447 is a single-acting industrial component featuring a kinematic yoke system and a 0180 valve actuator size with a 90-degree swivel angle. Operating within a pressure range of 2.8 bar to 8.4 bar and supporting SIL 2 low demand mode, this unit incorporates F07 and F10 flange hole patterns alongside a VDI/VDE 3845 NAMUR standard valve connection. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 533321 is a T-shape industrial component featuring a standard size, a 0.315 in nominal width, and a push-pull structural design with a gray releasing ring. Operating within a pressure range of -0.095 MPa to 1 MPa and temperatures from 0 °C to 60 °C, this 2.06 oz part accommodates compressed air per ISO 8573-1:2010 [7:-:-] and allows lubricated operation. It is equipped with an external thread 1/2 NPT pneumatic connection 1, a connection 2 for 3/8" outside diameter pneumatic tubing, an external hexagon 7/8 mounting type, and a coated seal on the screwed plug. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 533446 is a single-acting industrial component featuring a kinematic yoke system with a 90-degree swivel angle and F07 or F10 flange hole patterns. This unit operates within a pressure range of 5.6 bar to 8.4 bar, utilizes an ISO 5211 standard valve connection that conforms to VDI/VDE 3845 (NAMUR), and provides functional safety up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 533320 is a standard T-shape industrial component featuring a push-pull structural design, a 0.394-inch nominal width, and an external hexagon 3/4 mounting type with a coated screwed plug seal. It operates within a temperature range of 0 °C to 60 °C (32 °F to 140 °F) and supports an operating pressure from -0.095 MPa to 1 MPa (-0.95 bar to 10 bar | -13.775 psi to 145 psi) using compressed air as per ISO 8573-1:2010 [7:-:-]. This RoHS-compliant part weighs 1.91 oz, features a 3/8 NPT external thread for pneumatic connection 1, fits a 1/2-inch outside diameter pneumatic tubing for connection 2, and includes a gray releasing ring with a CRC rating of 1 for low corrosion stress. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 533445 is a single-acting industrial component featuring a kinematic yoke system with a 90-degree swivel angle and F07 or F10 flange hole patterns. It operates within a pressure range of 0.42 MPa to 0.84 MPa using a 0.42 MPa connection pressure for spring force, and achieves a maximum swivel frequency of 1 Hz at 6 bar with no cushioning. This unit provides SIL 2 low demand mode safety integrity, an ISO 5211 standard valve connection, and a VDI/VDE 3845 NAMUR valve connection that closes to the right. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 533319 is a standard T-shaped industrial component featuring a push-pull structural design with a 0.315 in nominal width and a coated screwed plug seal. This unit operates within a temperature range of 0 °C to 60 °C (32 °F to 140 °F) and handles an operating pressure from -0.095 MPa to 1 MPa (-0.95 bar to 10 bar, -13.775 psi to 145 psi) using compressed air according to ISO 8573-1:2010 [7:-:-]. Designed with an external thread 3/8 NPT pneumatic connection 1 and a connection 2 for 3/8" outside diameter pneumatic tubing, it includes an 11/16 external hexagon mounting type and a gray releasing ring in a pack size of 5. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 534475 is an inductive round industrial component featuring an N/O contact switching element function and a PNP switching output operating on a 10 V to 30 V DC voltage range. Built to EN 60947-5-2 and VDI/VDE 3845 (NAMUR) norms, it includes pulsed short-circuit protection, reverse polarity protection for all electrical connections, a switching position indication, and an IP67 degree of protection for ambient temperatures from -20 °C to 70 °C. The unit accommodates approved cable diameters of 7 mm to 13 mm, a maximum output current of 100 mA, and a corrosion resistance class of CRC 2. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 533444 is a single-acting industrial component featuring a kinematic yoke system and a 0120 valve actuator size with a 90-degree swivel angle. Operating within a pressure range of 0.35 MPa to 0.84 MPa, it utilizes an ISO 5211 flange hole pattern of F07 or F10, a VDI/VDE 3845 NAMUR standard valve connection, and provides safety integrity level support up to SIL 2 low demand mode. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 533318, is a T-shaped T-fitting featuring a 3/8 NPT external thread for pneumatic connection 1 and a 5/16-inch outside diameter connection for pneumatic tubing 2. Built with a push-pull structural design, a nominal width of 0.236 inches, and a coating-sealed screwed plug, it operates within a pressure range of -13.775 psi to 145 psi and an ambient temperature range of 32 °F to 140 °F using compressed air per ISO 8573-1:2010 [7:-:-]. The unit weighs 1.07 oz, utilizes an 11/16 external hexagon for mounting, includes a gray releasing ring, and is sold in a pack size of 5. Please submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 534474 is a round industrial component based on EN 60947-5-1 and VDI/VDE 3845 (NAMUR) norms, featuring a mechanical/electrical measuring principle with a changeover switch function and switching position indication. This unit operates within a 4 V to 250 V AC and DC range, supports an intrinsic current consumption of 1 mA to 5000 A, and accommodates a maximum output current of 5000 mA alongside a minimum load current of 1 mA at 4 V/DC. Built with a 250 V insulation voltage, 2.5 kV surge resistance, contamination level 3, and corrosion resistance class 2 for moderate stress, it accepts approved cable diameters from 7 mm to 13 mm for mounting in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this hardware.
View product details →
Festo
The Festo part number 533317 is a standard T-shaped industrial component featuring a 3/8 NPT external thread for pneumatic connection 1 and a 1/4" outer diameter connection for pneumatic tubing 2, packaged in a quantity of 5. Utilizing a push-pull structural design with a coated screwed plug seal, this unit operates within a pressure range of -13.775 psi to 145 psi and handles compressed air conforming to ISO 8573-1:2010 [7:-:-] with lubricated operation capability. It weighs 1.5 oz, mounts via an external hexagon 11/16 in any mounting position, and functions across an ambient temperature range of 32 °F to 140 °F. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 533443 is a single-acting industrial component featuring a kinematic yoke system with a 90-degree swivel angle and F07 or F10 flange hole patterns. This unit operates at a nominal pressure of 0.56 MPa within an operating pressure range of 2.8 bar to 8.4 bar, providing safety integrity up to SIL 2 low demand mode. It includes an adjustable end-position range from -1 degree to 9 degrees at 0 degrees and closes to the right with no cushioning or position sensing. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 533316 is a T-shape industrial component featuring a standard size, a 0.315-inch nominal width, and a push-pull structural design with a gray releasing ring. It has a 1/4 NPT external thread for pneumatic connection 1 and accommodates a 3/8-inch outside diameter pneumatic tubing for connection 2, utilizing an 11/16 external hexagon for mounting. Operating within a temperature range of 0 °C to 60 °C (32 °F to 140 °F) and pressures from -0.095 MPa to 1 MPa, this RoHS-compliant part supports compressed air as per ISO 8573-1:2010 [7:-:-] with lubricated operation possible. Please submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This single-acting Festo industrial component features a 0090 size valve actuator with a kinematic yoke system and a 90-degree swivel angle that closes to the right. The unit operates within an operating pressure range of 5.6 bar to 8.4 bar, utilizes an ISO 5211 flange hole pattern of F07 or F10, and includes a VDI/VDE 3845 NAMUR standard valve connection with up to SIL 2 low demand mode safety integrity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 533315 is a T-shaped industrial component featuring a standard size, a 0.236 in nominal width, and a push-pull structural design with a gray releasing ring. Engineered with a 1/4 NPT external thread for pneumatic connection 1 and a 5/16" outside diameter tubing connection for pneumatic connection 2, this unit operates across a pressure range of -0.095 MPa to 1 MPa and an ambient temperature range of 0 °C to 60 °C. It is designed for compressed air media per ISO 8573-1:2010 [7:-:-] with lubricated operation capability, carrying a corrosion resistance class of 1 and a product weight of 0.931 oz. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 533441 is a single-acting industrial component featuring a 0090 size valve actuator, a kinematic yoke system structural design, and an F07 or F10 flange hole pattern. It operates with a nominal pressure of 0.56 MPa, an operating pressure range of 0.42 MPa to 0.84 MPa, and provides a 90-degree swivel angle with no cushioning and no position sensing. Safety integrity level reaches up to SIL 2 low demand mode, and the unit closes to the right with a spring force connection pressure of 0.42 MPa. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 533314 is a standard T-shape industrial component featuring a 0.177 in nominal width and a push-pull structural design with a coated screwed plug seal. This unit operates within a pressure range of -0.095 MPa to 1 MPa using compressed air according to ISO 8573-1:2010 [7:-:-], supporting lubricated operation across an ambient temperature range of 0 °C to 60 °C. It is equipped with a 1/4 NPT external thread for pneumatic connection 1, a 1/4" outer diameter connection for pneumatic tubing 2, an external hexagon 9/16 mounting type, and weighs 0.79 oz with a low corrosion resistance class of 1. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →