Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8192279 is an electromechanical linear axis featuring a ball screw structural design with a size 80, a 500 mm working stroke, and a 16 mm screw diameter with a 10 mm/U spindle pitch. This component includes a recirculating ball bearing guide, supports stepper or servo motors in any mounting position, and achieves a maximum speed of 0.8 m/s, a maximum acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm with 100% duty cycle. It provides a ball screw reversing backlash of ±0.02 mm, incremental linear potentiometer measurement, position sensing for inductive sensors, VDMA24364-C1-L LABS conformity, and suitability for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8210276 is an oval, bell-shaped industrial component featuring a 20x60 mm vacuum cup size, a 5 cm³ suction cup volume, and a nominal width of 6 mm. This black part provides a 5 mm suction cup height compensation, a minimum workpiece radius of 12.5 mm, an internal thread G3/8 vacuum connection, and a product weight of 21 g. Operating within a pressure range of -95 kPa to 0 kPa and an ambient temperature range of -20 °C to 80 °C, it delivers a holding force of 81 N and a vertical lateral force of 103 N at the nominal operating pressure of -60 kPa. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8198529 is a 5/2-way bistable industrial component featuring a piloted, piston gate valve design with an electrical actuation type and a detenting manual override. This ISO 5599-1 compliant unit provides a standardized nominal flow rate of 1800 l/min through an 8 mm nominal width, a 42 mm width, and a sub-base size 1 pneumatic working port with an internal pilot air supply. Operating within a pressure range of 0.3 MPa to 1 MPa (3 bar to 10 bar), the device utilizes a soft sealing principle, positive overlap lap, adjustable exhaust air function via individual sub-base, and offers IP65 and NEMA 4 degrees of protection in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8202623 is a double-acting pneumatic parallel gripper featuring two jaws, a size 40 rating, a complete stroke of 40 mm, and a stroke of 20 mm per gripper jaw. This component utilizes a heavy-duty guide, a gear rack/pinion structural design, and elastic cushioning rings or pads at both ends without a fixed metal stop, operating within a pressure range of 0.2 MPa to 0.8 MPa. Position sensing is achieved via proximity switch, delivering a repetition accuracy of 0.03 mm, a maximum jaw angular play of 0.2 degrees, and a maximum jaw backlash of 0.05 mm. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 8192278 is an electromechanical linear axis featuring a size 80 structural design with a ball screw, a 400 mm working stroke, and a 10 mm/U spindle pitch. Engineered with a recirculating ball bearing guide, a 16 mm screw diameter, and a ball screw reversing backlash of ±0.02 mm, this unit supports stepper or servo motors up to a max rotational speed of 5000 rpm and a max speed of 0.8 m/s. It delivers a repetition accuracy of ±0.01 mm, a 100% duty cycle, and VDMA24364-C1-L LABS conformity while being suitable for the production of Li-ion batteries with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8210275 is a round protective bellows 1.5-fold industrial component featuring a 60 mm suction cup diameter, 8 mm nominal width, and 14.5 mm height compensation with an internal thread G3/8 vacuum connection positioned at the top. This black unit operates within a pressure range of -95 kPa to 0 kPa using atmospheric air based on ISO 8573-1:2010 [7:-:-], delivering a holding force of 140 N and a lateral force of 126 N at a nominal operating pressure of -60 kPa. Weighing 44 g with a volume of 28 cm³, the component functions across an ambient temperature range of -20 °C to 80 °C, exhibits a CRC 2 moderate corrosion stress rating, and conforms to VDMA24364-A1/A2-L LABS (PWIS) standards for any mounting position with a minimum workpiece radius of 40 mm. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8198528 is a 42 mm wide electrical actuated industrial component featuring a 5/2-way monostable valve function and a piston gate valve structural design. Operating at a pressure range of 0.3 MPa to 1 MPa (3 bar to 10 bar), this piloted unit delivers a standardized nominal flow rate of 1800 l/min according to ISO 8778 through an ISO 5599-1 size 1 sub-base pneumatic working port. It incorporates an IP65 and NEMA 4 degree of protection, internal pilot air supply, pneumatic spring reset, soft sealing principle, and a detenting manual override. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8202622 is a double-acting pneumatic parallel gripper featuring a size 40 designation, a complete stroke of 80 mm, and a stroke of 40 mm per gripper jaw across its two jaws. This component incorporates a heavy-duty guide, gear rack and pinion structural design, and elastic cushioning rings or pads at both ends without a fixed metal stop, operating within a pressure range of 2 bar to 8 bar (29 psi to 116 psi). Position sensing is accomplished via proximity switch, delivering a repetition accuracy of 0.03 mm, a maximum jaw angular play of 0.2 degrees, and a maximum jaw backlash of 0.05 mm. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8210274 is a round bell-shaped industrial component featuring a 60 mm suction cup diameter, a 6 mm nominal width, and 10.6 mm of height compensation for handling workpieces with a minimum radius of 27.5 mm. Operating within a pressure range of -95 kPa to 0 kPa with a nominal operating pressure of -60 kPa, this 24 g black unit delivers a holding force of 143 N and a lateral force of 216 N. It offers moderate corrosion stress resistance, VDMA24364-A1/A2-L LABS conformity, an ambient temperature range of -20 °C to 80 °C, and mounts via an internal thread G3/8 vacuum connection in any position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8192277 is an electromechanical linear axis featuring a ball screw structural design with a size 80, a 300 mm working stroke, and a 10 mm/U spindle pitch. It accommodates either a stepper or servo motor, achieves a maximum speed of 0.8 m/s with a repetition accuracy of ±0.01 mm, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8198527 is a 5/2-way monostable industrial component featuring a piloted piston gate valve design with an electrical actuation type and internal pilot air supply port. This unit provides a standardized nominal flow rate of 1800 l/min according to ISO 8778 across a 42 mm width, operating within a pressure range of 0.3 MPa to 1 MPa (3 bar to 10 bar) and utilizing ISO 5599-1 size 1 sub-base pneumatic working ports with an IP65 and NEMA 4 degree of protection. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8202579 is a pilot-controlled diaphragm regulator featuring a 3-way proportional pressure control valve with a soft sealing principle and a 5 mm nominal width pressurization alongside a 2.5 mm exhaust nominal width. This electrical component provides a pressure regulation range of 0.01 MPa to 1 MPa (0.1 bar to 10 bar), supports a digital setpoint input with a value range of 0 bit to 1000 bit, and includes short-circuit and reverse polarity protection for all electrical connections. Equipped with a mechanical spring reset method, an LED indicator 3-digit display, and an inlet pressure range of 6 bar to 11 bar, the unit maintains outlet pressure in uncontrolled form if the supply cable breaks according to its safety instructions. Submit your exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 8210273 is a round, flat industrial component featuring a 60 mm suction cup diameter, 8 mm nominal width, and 15 cm³ suction cup volume with an internal thread G3/8 vacuum connection. Designed with 6 mm of suction cup height compensation and any mounting position, it operates within a -95 kPa to 0 kPa pressure range to deliver a holding force of 120 N and a lateral force of 99 N at a nominal operating pressure of -60 kPa. This black component weighs 36 g, features a moderate corrosion resistance class of CRC 2, and functions across an ambient temperature range of -20 °C to 80 °C using atmospheric air based on ISO 8573-1:2010 [7:-:-]. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8197587 is an industrial component with a nominal length of 96 mm, a size of 67, and equal holder diameters of 32 mm for both holder 1 and holder 2. This RoHS-compliant unit weighs 1636 g, features a mass moment of inertia of 886 kgmm², supports a transferable torque of 145 Nm, and operates at a maximum rotational speed of 4500 rpm in any mounting position. It conforms to VDMA24364-B2-L LABS (PWIS) requirements, functioning within an ambient and storage temperature range of -25 °C to 60 °C and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8210178 is an industrial component weighing 12 g with dimensions of 24 mm by 143 mm by 6 mm. This RoHS compliant part features any mounting position, a corrosion resistance class of 2 for moderate corrosion stress, and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a formal price quotation.
View product details →
Festo
The Festo 8192276 is an electromechanical linear axis with a ball screw structural design, featuring an 80 size, a 200 mm working stroke, a 16 mm screw diameter, and a 10 mm/U spindle pitch. Engineered with a recirculating ball bearing guide, this unit delivers a maximum speed of 0.8 m/s, a maximum acceleration of 15 m/s², a repetition accuracy of ±0.01 mm, and a ball screw reversing backlash of ±0.02 mm for stepper or servo motor configurations with position sensing for inductive sensors. It operates at a 100% duty cycle in any mounting position and complies with VDMA24364-C1-L LABS conformity with suitability for the production of Li-ion batteries with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8202578 is a pilot-controlled diaphragm regulator featuring a 3-way proportional pressure control valve with a 5 mm nominal width pressurization and a 2.5 mm exhaust nominal width. This electrical component incorporates a soft sealing principle, digital setpoint input, mechanical spring reset, and a 3-digit LED indicator display, operating within a pressure regulation range of 0.006 MPa to 0.6 MPa (0.06 bar to 6 bar) with an inlet pressure of 6 bar to 8 bar. It provides short-circuit and reverse polarity protection for all electrical connections, while its safety protocol maintains outlet pressure in an uncontrolled form if the supply cable breaks. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 50 industrial component features a size 50 specification and supports any mounting position. It is rated for a corrosion resistance class (CRC) of 4 for particularly high corrosion stress and complies with VDMA24364-B2-L LABS (PWIS) standards within an ambient temperature range of -25 °C to 60 °C, alongside RoHS-compliant materials. Submit your exact part number, quantity, and application requirements to receive a quote for this part.
View product details →
Festo
The Festo industrial component, part number 8210061, features a transferable torque of 17 Nm and a maximum rotational speed of 6000 rpm, utilizing an actuator interface code of X48 and a motor input interface code of 87A. Weighing 808 g with RoHS-compliant materials, this unit supports any mounting position and provides an IP40 degree of protection, with VDMA24364 Zone III LABS conformity. It operates within an ambient temperature range of -10 °C to 60 °C, a storage temperature range of -25 °C to 60 °C, and a relative air humidity of 0 to 95%. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8192275 is an electromechanical linear axis featuring a ball screw structural design with a size 80, a 100 mm working stroke, and a 16 mm screw diameter with a 10 mm/U spindle pitch. This component includes a recirculating ball bearing guide, accommodates stepper or servo motors, and delivers a max speed of 0.8 m/s, a max acceleration of 15 m/s², and a repetition accuracy of ±0.01 mm with 100% duty cycle. It provides a ball screw reversing backlash of ±0.02 mm, incremental linear potentiometer measurement, position sensing for inductive sensors, and suitability for Li-ion battery production with reduced Cu/Zn/Ni values. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →