Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 194752 is a Midi-sized D-series filter regulator featuring a built-in pressure gauge, a 5 µm filtration grade, and a manual rotary condensate drain with a maximum 43 cm3 volume. Operating within a 1 to 16 bar working pressure and a 0.5 to 12 bar regulation range, this unit delivers a standard nominal flow rate of 2,400 l/min for compressed air to ISO 8573-1:2010 [-:9:-] or inert gases. The design incorporates a metal bowl guard, a rotary knob actuator lock with an integrated lock, and a vertical ± 5° assembly position with a CRC 2 moderate corrosion stress rating. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 194995 is a Maxi size Series D industrial component featuring a filter regulator without a pressure gauge, a proportional standard mist lubricator, and a fully automatic condensate drain with a maximum condensate volume of 43 cm3. Operating on compressed air in accordance with ISO8573-1:2010 [-:-:-], this unit provides a standard nominal flow rate of 4,500 l/min, a working pressure of 2 to 12 bar, and a pressure regulation range of 0.5 to 12 bar through G1/2 pneumatic connection ports. Constructed with a metal bowl guard, a rotary knob actuator lock with an integrated lock, and a filtration grade of 40 µm, the 2,600 g assembly is designed for vertical line installation within a medium and ambient temperature range of -10 to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194401 is a double-acting industrial guide component featuring a 6 mm piston diameter, a 10 mm stroke, and a yoke drive unit operating mode with zero centre of gravity distance from the working load to the yoke plate. Designed with flexible cushioning rings or plates at both ends, a recirculating ball bearing guide, and a through piston rod (S2 variant), it operates within a working pressure range of 2 to 10 bar at a maximum speed of 0.5 m/s using dried compressed air. Certified for hazardous locations under ATEX category II 2G for gas (c T4) and II 2D for dust (c 120°C) within an explosion-proof ambient temperature range of -5°C to +60°C, this unit supports any assembly position and includes position detection for a proximity sensor. Submit your required quantity, part number, and application parameters to request a formal quote.
View product details →
Festo
The Festo 194210 is a double-acting industrial component featuring a 1-inch stroke, a 1 5/8-inch piston diameter, and an oval piston providing torsion protection with a maximum piston rod rotation angle of plus or minus 0.6 degrees. Built with an aluminum cover and elastic cushioning rings or pads at both ends, this unit operates within a pressure range of 1 bar to 10 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4]. It delivers a theoretical force of 633 N retracting and 754 N advancing at 6 bar, with a basic weight of 480 g at 0 mm stroke and a 1/8 NPT pneumatic connection. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194994 is a Maxi size D-series industrial component featuring a filter regulator with a pressure gauge and a proportional standard mist lubricator designed for compressed air operating media. This unit provides a standard nominal flow rate of 4,500 l/min, a pressure control range of 0.5 to 7 bar, an inlet pressure of 1.5 to 12 bar, a maximum pressure hysteresis of 0.4 bar, and a 40 µm grade of filtration with a fully automatic condensate drain and a 43 cm3 maximum condensate volume. Constructed with G1/2 pneumatic connection ports, a metal bowl guard, and a rotary knob actuator lock with an integrated lock, the 2,600 g assembly operates at temperatures between -10 and 60 ¼irc}C in a vertical +/- 5° assembly position via line installation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 194400 is a double-acting industrial guide component featuring a 16 mm piston diameter, a 100 mm stroke, and a yoke drive unit operating mode with a zero millimetre centre of gravity distance from the working load to the yoke plate. This unit incorporates a recirculating ball bearing guide, flexible cushioning rings or plates at both ends with a 15 mm adjustable end-position range, and position detection for proximity sensors across an operating pressure of 1 to 10 bar and a maximum speed of 1 m/s in any assembly position. Certified with ATEX category II 2G for gas (c T4) and II 2D for dust (c 120°C) within an explosion-proof ambient temperature range of -5°C to +60°C, it operates using dried compressed air that may be lubricated or unlubricated. Submit your exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 194750 is a Midi size Series D filter regulator with a pressure gauge and a fully automatic condensate drain housed in a metal bowl guard. It features a rotary knob actuator lock with an integrated lock, a 40 µm grade of filtration, and a maximum condensate volume of 43 cm3. Operating within a working pressure of 2 to 12 bar and a pressure regulation range of 0.5 to 7 bar, this component delivers a standard nominal flow rate of 3,200 l/min for compressed air to ISO 8573-1:2010 [7:9:-] or inert gases. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194209 is a double-acting industrial component featuring a 1 5/8-inch piston diameter, a 0.5-inch stroke, and an oval piston providing integrated protection against torsion with a maximum piston rod rotation angle of +/- 0.6 degrees. Built with an aluminum cover and elastic cushioning rings or pads at both ends, this unit operates within a pressure range of 1 bar to 10 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4], delivering a theoretical advancing force of 754 N and a retracting force of 633 N at 6 bar. It has a basic weight of 480 g, a moving mass of 120 g at 0 mm stroke, 1/8 NPT pneumatic connections, a CRC rating of 2 for moderate corrosion stress, and functions across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 194993 is a Series D Maxi industrial component featuring a filter regulator without a pressure gauge, a proportional standard mist lubricator, and a fully automatic condensate drain with a 43 cm3 max condensate volume. Operating on compressed air with a standard nominal flow rate of 3,000 l/min, this unit incorporates a 5 µm filtration grade, a Rotary knob actuator lock with an integrated lock, a G1/4" prepared pressure gauge, and a pressure control range of 0.5 to 12 bar across a 1.5 to 12 bar inlet pressure 1. Designed with a metal bowl guard, G1/2 pneumatic connection ports, and a product weight of 2,880 g, it supports line installation in a vertical +/- 5° assembly position within a medium and ambient temperature range of -10 to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 194399 is a double-acting industrial drive unit featuring a 16 mm piston diameter, an 80 mm stroke, and a yoke design with a recirculating ball bearing guide. This component operates on a working pressure of 1 to 10 bar utilizing dried compressed air, either lubricated or unlubricated, with flexible cushioning rings or plates at both ends and provisions for position detection via proximity sensor. Certified with ATEX category II 2G for gas and II 2D for dust, it functions within an explosion-proof ambient temperature range of -5°C to +60°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 194992 is a Maxi-size D-series industrial component featuring a filter regulator with pressure gauge and a proportional standard mist lubricator designed for compressed air operation. It provides a 5 µm filtration grade, a fully automatic condensate drain with a 43 cm3 maximum condensate volume, a metal bowl guard, and a rotary knob actuator lock with an integrated lock. The unit operates within a medium and ambient temperature range of -10 to 60 µm, supporting an inlet pressure of 1.5 to 12 bar, a pressure control range of 0.5 to 12 bar, a maximum pressure hysteresis of 0.4 bar, and a standard nominal flow rate of 3,000 l/min. Configured with a G1/2 pneumatic connection port for vertical line installation within +/- 5°, this 2,950 g assembly includes a pressure gauge. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 194208 is a double-acting industrial component featuring a 1 5/8" piston diameter, an oval piston providing anti-torsion guidance with a maximum rotation angle of +/- 0.6 degrees, and elastic cushioning rings or pads at both ends. Constructed with a wrought aluminum alloy housing, aluminum cover, high-alloy steel piston rod, and FPM and TPE-U seals, this unit delivers a theoretical force of 633 N in both retracting and advancing directions at 6 bar. It operates within a pressure range of 1 bar to 10 bar and an ambient temperature range of -20 °C to 80 °C using compressed air per ISO 8573-1:2010 [7:4:4] via a 1/8 NPT pneumatic connection. Featuring a stroke length from 0.04 in to 13 in, VDMA24364-B1/B2-L LABS conformity, and a CRC 2 moderate corrosion resistance rating, it permits oil-lubricated operation which is required for further use. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 194398 is a double-acting industrial component featuring a yoke drive unit design structure with a 16 mm piston diameter, a 50 mm stroke, and a 15 mm adjustable end-position range. This guide incorporates a recirculating ball bearing guide, flexible cushioning rings or plates at both ends, and supports position detection via proximity sensors across an operating pressure range of 1 to 10 bar at a maximum speed of 1 m/s. Rated for hazardous environments with ATEX category II 2G gas and II 2D dust certifications for ambient temperatures between -5°C and +60°C, it operates using dried compressed air that may be lubricated or unlubricated in any assembly position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194748 is a Midi size Series D filter regulator featuring a manual rotary condensate drain, a 40 µm filtration grade, and a design structure without a pressure gauge while being prepared for G1/4. Operating within a working pressure range of 1 to 16 bar and a pressure regulation range of 0.5 to 7 bar, this component delivers a standard nominal flow rate of 3,200 l/min for compressed air to ISO 8573-1:2010 [-:9:-] and inert gases. It includes a rotary knob actuator lock with an integrated lock, a metal bowl guard, a maximum condensate volume of 43 cm3, and a moderate corrosion resistance classification CRC of 2. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 194991 is a Maxi size D-series industrial component featuring a filter regulator without a pressure gauge and a proportional standard mist lubricator designed for compressed air operation. This unit incorporates a fully automatic condensate drain with a maximum condensate volume of 43 cm3, a 40 µm grade of filtration, and a metal bowl guard for line installation at a vertical position within +/- 5°. Operating with an inlet pressure range of 2 to 12 bar and a pressure control range of 0.5 to 12 bar, it delivers a standard nominal flow rate of 3,300 l/min through G1/2 pneumatic connection ports and a G1/4" prepared pressure gauge. Additional specifications include a rotary knob actuator lock with an integrated lock, a maximum pressure hysteresis of 0.4 bar, a product weight of 2,600 g, and medium and ambient temperature ranges of -10 to 60 µC. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194207 is a double-acting industrial component featuring a 1 5/8" piston diameter and a stroke adjustable from 0.04 in to 13 in. Built with an oval piston providing torsion protection and an aluminum cover, this unit delivers a theoretical advancing force of 754 N and retracting force of 633 N at 6 bar operating pressure. It operates on compressed air meeting ISO 8573-1:2010 [7:4:4] standards within an ambient temperature range of 0 °C to 120 °C, utilizing elastic cushioning rings at both ends and a 1/8 NPT pneumatic connection. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194397 is a double-acting industrial drive unit featuring a 16 mm piston diameter, a 40 mm stroke, and a recirculating ball bearing guide with a yoke operating mode. This component operates on dried compressed air, lubricated or unlubricated, within a working pressure range of 1 to 10 bar, achieving a maximum speed of 1 m/s with flexible cushioning rings or plates at both ends and a 15 mm adjustable end-position range. Rated for hazardous locations under ATEX category II 2G for gas and II 2D for dust, it functions within an explosion-proof ambient temperature range of -5°C to +60°C and includes position detection for a proximity sensor in any assembly position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
Engineered by Festo, this double-acting industrial component features a 1 5/8" piston diameter and an adjustable stroke ranging from 0.04 in to 13 in with an oval piston providing torsion protection and a maximum piston rod rotation angle of +/- 0.6 deg. The unit operates on compressed air complying with ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar (0.1 MPa to 1 MPa), delivering a theoretical force of 633 N for both advancing and retracting strokes at 6 bar through a 1/8 NPT pneumatic connection. Built with a wrought aluminum alloy housing, aluminum cover, high-alloy steel piston rod, and FPM and TPE-U(PU) seals, the assembly incorporates elastic cushioning rings at both ends and achieves a moderate corrosion stress rating (CRC 2) with VDMA24364-B1/B2-L LABS conformity for ambient temperatures between -20 °C and 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194205 is a double-acting industrial component featuring a 1 5/8" piston diameter, an adjustable stroke ranging from 0.04 in to 13 in, and an oval piston providing torsion protection with a maximum piston rod rotation angle of +/- 0.6 deg. Built with a wrought aluminum alloy housing, aluminum cover, high-alloy steel piston rod, and FPM and TPE-U(PU) seals, it delivers a theoretical force of 633 N at 6 bar for both advancing and retracting strokes while operating within a pressure range of 1 bar to 10 bar. This unit incorporates elastic cushioning rings at both ends, features a 1/8 NPT pneumatic connection, achieves a CRC 2 moderate corrosion resistance rating, and functions with compressed air conforming to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 194745 is a Midi size Series D filter regulator with an integrated pressure gauge, rotary knob actuator lock, and metal bowl guard designed for vertical assembly within +/- 5°. This component provides a standard nominal flow rate of 3,100 l/min across a working pressure range of 2 to 12 bar, featuring a fully automatic condensate drain with a 43 cm3 max condensate volume and a 40 µm filtration grade. Operating with compressed air to ISO 8573-1:2010 [7:9:-] or inert gases, the unit achieves a pressure regulation range of 0.5 to 12 bar with a maximum pressure hysteresis of 0.2 bar and moderate corrosion stress resistance classified as CRC 2. Submit the exact part number, quantity, and application requirements to request a formal quote for this industrial component.
View product details →