Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 195001 is a Size Maxi Series D industrial component featuring a filter regulator without a pressure gauge and a proportional standard mist lubricator designed for line installation with G3/4 pneumatic connection ports. This assembly operates with compressed air within a medium and ambient temperature range of -10 to 60 °C, providing a standard nominal flow rate of 5,000 l/min across an inlet pressure of 1.5 to 12 bar and a pressure control range of 0.5 to 7 bar. Equipped with a 40 µm filtration grade, fully automatic condensate drain, 43 cm3 max condensate volume, metal bowl guard, and a rotary knob actuator lock with an integrated lock, the unit weighs 2,600 g and is prepared for a G1/4" pressure gauge in a vertical +/- 5° assembly position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 194757 is a Midi size D series filter regulator with a pressure gauge and a structural design featuring a fully automatic condensate drain, a metal bowl guard, and a 40 µm filtration grade. This component operates within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar) and a regulation range of 0.5 bar to 12 bar, delivering a normal nominal flow rate of 3400 l/min for compressed air as per ISO 8573-1:2010 [7:9:-] or inert gases. It incorporates a rotary knob with an integrated lock for the actuator, supports vertical mounting within ±5°, and achieves a maximum condensate volume of 43 cm³ with moderate corrosion resistance (CRC 2). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 194407 is a double-acting industrial component featuring a 10 mm piston diameter, a 20 mm stroke, and a yoke drive unit operating mode with a recirculating ball bearing guide. This guide design structure incorporates flexible cushioning rings or plates at both ends, a 15 mm adjustable end-position range, and a through piston rod variant while operating on dried compressed air within a working pressure range of 1.5 to 10 bar. Certified for hazardous locations, it meets ATEX category II 2G for gas with c T4 protection and ATEX category II 2D for dust with c 120°C protection across an explosion-proof ambient temperature range of -5°C to +60°C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 195000 is a Maxi size Series D filter regulator with pressure gauge and proportional standard mist lubricator, featuring a G3/4 pneumatic connection port for line installation. This industrial component operates with a working pressure of 2 to 12 bar, a pressure regulation range of 0.5 to 12 bar, and delivers a standard nominal flow rate of 5,000 l/min using compressed air according to ISO 8573-1:2010 [-:-:-]. Key physical and operational attributes include a 40 µm grade of filtration, fully automatic condensate drain with a 43 cm3 max condensate volume, metal bowl guard, rotary knob actuator lock with integrated lock, and a medium and ambient temperature range of -10 to 60 µ0C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo double-acting industrial component features a 6-inch stroke, a 1 5/8-inch piston diameter, and an oval piston providing torsion protection with a maximum piston rod rotation angle of +/- 0.6 degrees. Built with an aluminum cover and elastic cushioning rings or pads at both ends, the unit operates within a pressure range of 1 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] and achieves theoretical forces of 633 N retracting and 754 N advancing at 6 bar. The assembly carries a corrosion resistance class of 2 for moderate corrosion stress, a VDMA24364-B1/B2-L LABS conformity, a basic weight of 480 g at 0 mm stroke, and a 1/8 NPT pneumatic connection. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194756 is a Midi size D series filter regulator featuring a structural design with an integrated pressure gauge, rotary knob actuator lock, and a manual rotating condensate drain with a maximum condensate volume of 43 cm³. It operates within a pressure range of 1 bar to 16 bar and regulates pressure from 0.5 bar to 12 bar, delivering a normal nominal flow rate of 3400 l/min for compressed air as per ISO 8573-1:2010 [-:9:-] or inert gases. Built with a metal bowl guard and a corrosion resistance class of CRC 2, the unit maintains an output air quality class of ISO 8573-1:2010 [7:8:4] while supporting vertical mounting within ±5° and optional oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 194406 is a double-acting industrial guide component featuring a 10 mm piston diameter, a 10 mm stroke, and a yoke drive unit operating mode with a 0 mm centre of gravity distance from the working load to the yoke plate. This unit incorporates a recirculating ball bearing guide, flexible cushioning rings or plates at both ends, and position detection for proximity sensors, functioning across an operating pressure of 1.5 to 10 bar with a maximum speed of 0.8 m/s, an adjustable end-position range of 15 mm, and compatibility with dried compressed air that is lubricated or unlubricated in any assembly position. Certified with ATEX category II 2G for gas (c T4) and category II 2D for dust (c 120°C) within an explosion-proof ambient temperature range of -5°C to +60°C, the S2 variant includes a through piston rod. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 194999 is a Maxi size D series industrial component featuring a filter regulator without a pressure gauge, a proportional standard mist lubricator, and a fully automatic condensate drain with a maximum condensate volume of 43 cm3. Operating within a working pressure range of 2 to 12 bar and a pressure regulation range of 0.5 to 12 bar, this unit delivers a standard nominal flow rate of 3,600 l/min using compressed air according to ISO8573-1:2010 [-:-:-] at temperatures between -10 and 60 °C. The assembly includes a rotary knob actuator lock with an integrated lock, a 5 µm grade of filtration, a metal bowl guard, and G3/4 pneumatic connection ports designed for vertical installation within +/- 5°. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 194215 is a double-acting industrial component featuring a 1 5/8" piston diameter and a 5 in stroke, utilizing an oval piston for torsion protection and guide with a maximum piston rod rotation angle of +/- 0.6 deg. Operating within a pressure range of 1 bar to 10 bar on compressed air conforming to ISO 8573-1:2010 [7:4:4] with elastic cushioning rings at both ends, this unit provides a theoretical advancing force of 754 N and a retracting force of 633 N at 6 bar. Constructed with an aluminum cover, the assembly has a basic weight of 480 g with 1/8 NPT pneumatic connections, a corrosion resistance class of CRC 2, and functions within an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194405 is a double-acting industrial guide component featuring a 6 mm piston diameter, a 50 mm stroke, and a yoke drive unit operating mode with a zero center of gravity distance from the working load to the yoke plate. This unit utilizes a recirculating ball bearing guide, flexible cushioning rings or plates at both ends, and a through piston rod variant, operating within a working pressure range of 2 to 10 bar at speeds up to 0.5 m/s using dried compressed air. Certified for hazardous locations, it meets ATEX category II 2G and II 2D standards with ignition protection types c T4 and c 120°C for an ambient temperature range of -5°C to +60°C, and includes position detection capabilities for proximity sensors in any assembly position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194998 is a Series D Maxi industrial component featuring a filter regulator with pressure gauge and a proportional standard mist lubricator designed for compressed air operation. This unit includes a 5 µm filtration grade, fully automatic condensate drain with a max condensate volume of 43 cm3, metal bowl guard, and a rotary knob actuator lock with an integrated lock. Operating within an inlet pressure range of 1.5 to 12 bar and a pressure control range of 0.5 to 12 bar, it delivers a standard nominal flow rate of 3,600 l/min through G3/4 pneumatic connection ports. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194214 is a double-acting industrial component featuring a 1 5/8-inch piston diameter, a 4-inch stroke, and an oval piston providing an anti-torsion guide with a maximum rotation angle of +/- 0.6 degrees. Designed with an aluminum cover and elastic cushioning rings or pads at both ends, this unit operates within a pressure range of 1 bar to 10 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4]. It delivers a theoretical advancing force of 754 N and a retracting force of 633 N at 6 bar, while maintaining a basic weight of 480 g with a 1/8 NPT pneumatic connection. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 194404 is a double-acting industrial drive unit featuring a yoke design with a 6 mm piston diameter and a 40 mm stroke. This component incorporates a recirculating ball bearing guide, flexible cushioning rings at both ends, and an adjustable end-position range of 10 mm for operation at a working pressure of 2 to 10 bar and speeds up to 0.5 m/s. Certified with ATEX category II 2G for gas and II 2D for dust, the unit operates in ambient temperatures from -5°C to +60°C using dried compressed air. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 194754 is a Midi size Series D filter regulator with an integrated pressure gauge, featuring a rotary knob actuator lock and a metal bowl guard for a vertical assembly position within +/- 5°. It delivers a standard nominal flow rate of 2,400 l/min across a working pressure range of 2 to 12 bar and a pressure regulation range of 0.5 to 12 bar with a maximum pressure hysteresis of 0.2 bar. The unit incorporates a 5 µm filtration grade, a fully automatic condensate drain with a maximum condensate volume of 43 cm3, and operates with compressed air to ISO 8573-1:2010 [7:9:-] or inert gases at a medium temperature of 5 to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 194997 is a Maxi size D-series industrial component featuring a filter regulator without a pressure gauge, a proportional standard mist lubricator, and a fully automatic condensate drain with a 43 cm3 max condensate volume. Operating on compressed air within a medium and ambient temperature range of -10 to 60 °C, this unit delivers a standard nominal flow rate of 3,800 l/min, an inlet pressure of 2 to 12 bar, and a pressure control range of 0.5 to 12 bar. It includes a metal bowl guard, a rotary knob actuator lock with an integrated lock, a G1/4" prepared pressure gauge, and G3/4 pneumatic connection ports for vertical line installation at +/- 5°. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 194213 is a double-acting industrial component featuring a 1 5/8" piston diameter, a 3 in stroke, and an oval piston providing integrated protection against torsion with a maximum piston rod rotation angle of +/- 0.6 deg. Built with an aluminum cover and elastic cushioning rings or pads at both ends, this unit operates within a pressure range of 0.1 MPa to 1 MPa (1 bar to 10 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4], and delivers a theoretical force of 754 N advancing and 633 N retracting at 6 bar. It exhibits a CRC 2 moderate corrosion stress rating, a basic weight of 480 g with a moving mass of 120 g at 0 mm stroke, a 1/8 NPT pneumatic connection, and functions across an ambient temperature range of -20 °C to 80 °C. Request a quote today by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
Engineered by Festo with a 6 mm piston diameter, 30 mm stroke, and yoke drive operating mode, this double-acting industrial component features a recirculating ball bearing guide with a through piston rod (S2 variant) and flexible cushioning rings at both ends (P). It operates at working pressures between 2 and 10 bar using dried compressed air, achieves a maximum speed of 0.5 m/s, and includes position detection capabilities for proximity sensors in any assembly position. Certified under ATEX category II 2G for gas (c T4) and II 2D for dust (c 120°C) within an ambient temperature range of -5°C to +60°C, the unit maintains a 0 mm centre of gravity distance from the working load to the yoke plate alongside a 10 mm adjustable end-position range. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 194996 is a Maxi size D-series industrial component featuring a filter regulator with a pressure gauge and a proportional standard mist lubricator designed for compressed air operation. It incorporates a 40 µm filtration grade, a fully automatic condensate drain with a maximum condensate volume of 43 cm3, a metal bowl guard, and a rotary knob actuator lock with an integrated lock. Operating within a medium and ambient temperature range of -10 to 60 µC, this unit delivers a standard nominal flow rate of 3,800 l/min across an inlet pressure of 2 to 12 bar and a pressure control range of 0.5 to 12 bar. Weighing 2,600 g with G3/4 pneumatic connection ports, it is configured for vertical line installation within +/- 5°. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 194402 is a double-acting industrial drive unit featuring a 6 mm piston diameter, a 20 mm stroke, and a yoke design structure with a 0 mm centre of gravity distance from the working load to the yoke plate. Equipped with a recirculating ball bearing guide, flexible cushioning rings or plates at both ends, and an adjustable end-position range of 10 mm, this component operates within a working pressure of 2 to 10 bar and a maximum speed of 0.5 m/s using dried compressed air that is lubricated or unlubricated. Certified with ATEX category II 2G for gas and II 2D for dust, the unit operates in explosion-proof ambient temperatures from -5°C to +60°C and includes position detection for a proximity sensor alongside an S2 through piston rod variant for any assembly position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 194212 is a double-acting industrial component featuring a 2-inch stroke and a 1 5/8-inch piston diameter with an oval piston providing torsion protection and a maximum piston rod rotation angle of plus or minus 0.6 degrees. Operating within a pressure range of 1 bar to 10 bar utilizing compressed air in accordance with ISO 8573-1:2010 [7:4:4], this aluminum-covered unit delivers a theoretical retracting force of 633 N and advancing force of 754 N at 6 bar. It incorporates elastic cushioning rings at both ends, a 1/8 NPT pneumatic connection, a CRC rating of 2 for moderate corrosion stress, and functions across an ambient temperature range of -20 °C to 80 °C with optional oil lubrication. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →