Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 188277 is a single-acting industrial component featuring a 63 mm piston diameter, a 25 mm stroke, and elastic cushioning rings or pads at both ends. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar, this piston rod assembly delivers a theoretical advancing force of 1798 N at 6 bar with a 50 N spring resetting force in the retracted position. Built for any mounting position with a G1/8 pneumatic connection, the unit accommodates proximity sensors and is rated for ambient temperatures between -20 °C and 80 °C. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
The Festo 186312 is a standard L-shaped industrial component featuring a 6.2 mm nominal width and a push-pull structural design with an integrated sealing ring on the screwed plug for any mounting position. It operates with compressed air per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C, supporting lubricated operation and accommodating an extensive range of approved tubing types including PAN, PEN, and PUN variants with a 23.2 mm insertion depth. Operating pressure spans from -0.95 bar to 6 bar across the entire temperature range, and extends up to 14 bar in temperature-dependent conditions, governed by a nominal tightening torque of 15.5 Nm with a ±20% tolerance and classified under CRC 1 for low corrosion stress. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo 188135 is a single-acting industrial component featuring a 20 mm piston diameter and a 10 mm stroke, operating via pushing mode with elastic cushioning rings at both ends. It operates within a pressure range of 1.5 bar to 10 bar (0.15 MPa to 1 MPa) using compressed air conforming to ISO 8573-1:2010 [7:4:4], supporting oil lubrication and functioning across an ambient temperature range of -20 °C to 80 °C. The unit includes provisions for position sensing via proximity sensor, an M5 pneumatic connection, and optional mounting via through-hole or accessories. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 187332 is a pilot-controlled piston control valve featuring a 3-way proportional pressure control valve closed design with soft sealing and electrical actuation. This component operates within a DC operating voltage range of 18 V to 30 V, a nominal operating voltage of 24 VDC, and includes short-circuit and reverse polarity protection for all electrical connections. It provides an inlet pressure range of 11 bar to 12 bar, a pressure regulation range of 0 bar to 10 bar, an 11 mm nominal width pressurization, and a 12 mm exhaust nominal width with a maximum pressure hysteresis of 0.05 bar. Safety instructions dictate that if the power supply cable breaks, the outlet pressure will drop to 0 bar, and the unit supports any mounting position with an off switching time of 1000 ms and an on switching time of 230 ms. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 188276 is a single-acting industrial component featuring a 63 mm piston diameter and a 10 mm stroke, operating via a pushing mode with a spring resetting force of 50 N in the retracted position. Built to ISO 6431 hole pattern and VDMA 24562 standards with elastic cushioning rings at both ends, this unit delivers a theoretical advancing force of 1798 N at 6 bar across an operating pressure range of 1 bar to 10 bar (14.5 psi to 145 psi). Designed for any mounting position using a through-hole or accessories, it includes G1/8 pneumatic connections, position sensing for proximity sensors, and a moving mass of 155 g within a total product weight of 642 g. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 186311 is a standard-size industrial component featuring an L-shaped design with a nominal width of 5.3 mm and a push-pull structural design utilizing a sealing ring on the screwed plug. Operating on compressed air according to ISO 8573-1:2010 [7:-:-] with an ambient temperature range of -10 °C to 80 °C, this component accommodates a nominal tightening torque of 15.5 Nm with a ±20% tolerance and is compatible with an extensive range of approved Festo tubing types including PUN, PAN, and PEN. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 188134 is a single-acting industrial component with a 20 mm piston diameter and a 5 mm stroke, featuring a pushing mode of operation and elastic cushioning rings or pads at both ends. Designed with a structural piston and piston rod supporting position sensing via proximity sensors, it operates within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar or 21.75 psi to 145 psi) using compressed air according to ISO 8573-1:2010 [7:4:4]. This 120 g unit delivers a theoretical advancing force of 170 N at 6 bar with a 26 g moving mass, a spring resetting force of 10 N in the retracted position, and accommodates through-hole or accessory mounting in any position. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 187331 is a pilot-controlled piston control valve featuring a 3-way proportional pressure control valve closed design with soft sealing and an electrical actuation type. This component provides a pressure regulation range of 0 bar to 6 bar at an inlet pressure of 7 bar to 8 bar, operating on a nominal DC voltage of 24 V within a voltage range of 18 V to 30 V. Integrated short-circuit and reverse polarity protection apply to all electrical connections, and the unit includes a safety function where a power supply cable break causes outlet pressure to drop to 0 bar. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 188275 is a double-acting industrial component featuring a 50 mm piston diameter, a 25 mm stroke, and structural piston and piston rod design adhering to ISO 6431, hole pattern, and VDMA 24562 norms. Operating within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar / 8.7 psi to 145 psi), this unit utilizes compressed air per ISO 8573-1:2010 [7:4:4] with possible oil lubrication, delivering a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar. It incorporates elastic cushioning rings at both ends, accommodates any mounting position across an ambient temperature range of -20 °C to 80 °C, and weighs 481 g with a 143 g moving mass. Submit the exact part number, quantity, and application requirements for a formal price quote.
View product details →
Festo
The Festo 186310 is a standard, L-shaped industrial component featuring a nominal width of 5.2 mm and a push-pull structural design with a 20.2 mm tubing insertion depth. This part utilizes a sealing ring on the screwed plug, supports any mounting position, and operates with compressed air as per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C. It is compatible with PAN-, PAN-MF-, PAN-R-, PAN-V0-, PEN-, PFAN-, PLN-, PTFEN-, PUN-, PUN-CM-, PUN-DUO-, PUN-H-, PUN-H-DUO-, PUN-S-, PUN-S-DUO-, and PUN-V0- tubing types, accommodating lubricated operation with a nominal tightening torque of 9 Nm ±20%. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 188133 is a single-acting industrial component featuring a 20 mm piston diameter, a 25 mm stroke, and elastic cushioning rings or pads at both ends. Operating on compressed air within a pressure range of 1.5 bar to 10 bar, this unit delivers a theoretical advancing force of 170 N at 6 bar with a 10 N spring resetting force in the retracted position. It is constructed for any mounting position using a through-hole or optional accessories via an M5 pneumatic connection, and operates within an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 187330 is an electrically actuated, pilot-controlled piston control valve featuring a 3-way proportional pressure control function with a closed design and soft sealing principle. It operates on a nominal DC voltage of 24 V within a voltage range of 18 V to 30 V, incorporating short-circuit and reverse polarity protection for all electrical connections. The unit delivers a pressure regulation range of 0 bar to 6 bar (0 MPa to 0.6 MPa) at inlet pressures between 7 bar and 8 bar, while maintaining a maximum pressure hysteresis of 0.05 bar (0.005 MPa), an 11 mm pressurization nominal width, and a 12 mm exhaust nominal width. Safety features dictate that a power supply cable break causes the outlet pressure to drop to 0 bar, and the valve can be mounted in any position with an on switching time of 230 ms and an off switching time of 660 ms. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 188274 is a double-acting industrial component featuring a 50 mm piston diameter, a 20 mm stroke, and a structural design comprising a piston and piston rod built to ISO 6431, hole pattern, and VDMA 24562 norms. This unit operates within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar, 8.7 psi to 145 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] and incorporates elastic cushioning rings or pads at both ends. It delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, supports any mounting position, and features an ambient temperature range of -20 °C to 80 °C with a total product weight of 447 g. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component features a standard L-shape design with a nominal width of 4.3 mm and an 18.2 mm tubing insertion depth utilizing a push-pull structural design. It operates with compressed air as per ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure of -0.95 bar to 14 bar and an ambient temperature range of -10 °C to 80 °C. The unit includes a sealing ring on the screwed plug, offers a nominal tightening torque of 15.5 Nm with a ±20% tolerance, and maintains a corrosion resistance class of 1 with VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 188132 is a single-acting industrial component featuring a 20 mm piston diameter and a 10 mm stroke, operating via a pushing mode with a spring resetting force of 10 N in the retracted position. Operating within a pressure range of 1.5 bar to 10 bar (0.15 MPa to 1 MPa) utilizing compressed air, this unit incorporates elastic cushioning rings at both ends, an M5 pneumatic connection, and supports any mounting position. The assembly provides a theoretical advancing force of 170 N at 6 bar, a moving mass of 21 g, a total product weight of 81 g, and is constructed with RoHS-compliant materials for an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 187329 is a pilot-controlled piston control valve featuring an electrical actuation type with a 3-way proportional pressure control valve closed function and soft sealing principle. It operates on a 24 V DC nominal operating voltage within a DC operating voltage range of 18 V to 30 V, utilizing an inlet pressure of 3 bar to 4 bar to achieve a pressure regulation range of 0 bar to 2 bar. Integrated short-circuit and reverse polarity protection apply to all electrical connections, and the unit includes a safety mechanism where a power supply cable break causes the outlet pressure to drop to 0 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 186308 is an L-shaped industrial component featuring a 4.1 mm nominal width and a push-pull structural design with an 18.2 mm tubing insertion depth and a sealing ring on the screwed plug. This standard component operates with compressed air as per ISO 8573-1:2010 [7:-:-] across a temperature-dependent operating pressure of -0.95 bar to 14 bar and an ambient temperature range of -10 °C to 80 °C in any mounting position. It accommodates multiple approved tubing types including PAN, PEN, PFAN, PLN, and PUN series, achieves a nominal tightening torque of 9 Nm with a ±20% tolerance, and offers a corrosion resistance class of 1 alongside VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 188273 is a double-acting industrial component featuring a 50 mm piston diameter and a 15 mm stroke, built on ISO 6431 and VDMA 24562 hole pattern norms with a piston and piston rod structural design. Operating within a pressure range of 0.06 MPa to 1 MPa and ambient temperatures from -20 °C to 80 °C, this unit delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar using compressed air per ISO 8573-1:2010 [7:4:4]. It incorporates elastic cushioning rings at both ends, a 411 g total product weight, and CRC 1 low corrosion stress resistance without position sensing. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
The Festo 188131 is a single-acting industrial component featuring a 20 mm piston diameter and a 5 mm stroke, operating via pushing mode with elastic cushioning rings at both ends. It operates within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar or 21.75 psi to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4], delivering a theoretical advancing force of 180 N at 6 bar with a 5 N spring resetting force in the retracted position. Featuring an M5 pneumatic connection, a product weight of 52 g, and through-hole or accessory mounting options, this RoHS-compliant unit functions across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
This standard Festo industrial component, part number 186307, features an L-shaped design with a 4.2 mm nominal width and an 18.2 mm tubing insertion depth utilizing the push-pull structural design principle. It operates with compressed air according to ISO 8573-1:2010 [7:-:-], supporting lubricated operation across an ambient temperature range of -10 °C to 80 °C and an operating pressure of -0.095 MPa to 0.6 MPa. The part incorporates a sealing ring on the screwed plug, offers a corrosion resistance class of 1, maintains a nominal tightening torque of 5.4 Nm with a ±20% tolerance, and is approved for PAN, PEN, PFAN, PLN, PTFEN, and PUN tubing types. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →