Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 15717 is an industrial component featuring a diaphragm regulator design with secondary exhaust and a constant output pressure function for front panel installation in any assembly position. Constructed with a POM housing and NBR, TPE-A, and TPE-U(PU) seals, this unit handles a standard nominal flow rate of 150 l/min, a working pressure of 10 bar (145 psi), a maximum pressure hysteresis of 0.3 bar, and an 8 bar (120 psi) pilot pressure within an ambient temperature range of -10 to 60 °C while maintaining VDMA24364 zone III PWIS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156885 is a double-acting industrial component featuring a 40 mm piston diameter, a 10 mm stroke, and a piston rod at one end equipped with an anti-torsion guide rod and yoke. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar, it utilizes elastic cushioning rings at both ends to absorb 0.52 J of impact energy. This unit delivers a theoretical advancing force of 754 N and a retracting force of 686 N at 6 bar, with position sensing enabled via a proximity switch across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 1584949 is an industrial component featuring a nominal operating voltage of 565 V DC, a standstill torque of 38.77 Nm, and six pole pairs with a star inside winding switch configuration. Built for continuous S1 rating class operation according to EN 60034-1, it conforms to IEC 60034 standards, incorporates class F insulation protection, and utilizes a PTC resistor for temperature monitoring within an IP65 enclosure rated for ambient temperatures from -10 to 40 °C. The unit includes an electrical plug connector system, exhibits CRC 2 moderate corrosion resistance, complies with RoHS materials notes and VDMA24364-B2-L PWIS conformity, and carries RCM Mark, c UL us Recognized, CE, and UKCA authorizations. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 158849 is a double-acting industrial component featuring a 100 mm piston diameter, an M20x1,5 male piston rod thread, and an adjustable pneumatic cushioning (PPV) at both ends with a 30 mm cushioning length. Built in accordance with ISO 6431, this unit operates within a pressure range of 0.2 to 12 bar using dried compressed air and accommodates strokes from 1 to 2,000 mm in any assembly position. This variant includes a corrosion and acid resistant stainless steel piston rod, a piston rod nut, and an FCM wiper seal, achieving a corrosion resistance classification CRC 2 and Germanischer Lloyd authorization. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 157169 is a single-acting industrial component featuring a pulling action, a 16 mm piston diameter, and a 25 mm stroke driven by a square piston rod with a male thread end. Operating on compressed air per ISO8573-1:2010 [7:4:4] within a 1.3 to 10 bar working pressure and -20 to 80 °C ambient temperature range, this piston and piston rod assembly incorporates flexible cushioning rings at both ends and position detection for proximity sensors. It delivers a theoretical force of 81 N at 6 bar during the advance stroke, features a CRC 2 moderate corrosion resistance classification, and permits lubricated operation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156884 is a double-acting industrial component featuring a 40 mm piston diameter, a 5 mm stroke, and a piston rod at one end equipped with a guide rod and yoke for torsion protection. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar, this unit delivers a theoretical advancing force of 754 N and a retracting force of 686 N at 6 bar. It incorporates elastic cushioning rings at both ends, accommodates position sensing via proximity switch, and functions in ambient temperatures from -20 °C to 80 °C with a moderate corrosion resistance class of 2. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 1584948 industrial component features a standstill torque of 38.77 Nm, 6 pole pairs, and a star inside winding switch configuration with a nominal operating voltage of 565 V DC. Rated S1 according to EN 60034-1 with insulation protection class F and an IP65 protection class, this unit operates in ambient temperatures from -10 to 40 °C and includes PTC resistor temperature monitoring. It conforms to IEC 60034, carries RCM and c UL us authorizations, and complies with EU and UKCA directives for EMC, low voltage, and RoHS with a CRC 2 moderate corrosion resistance classification. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component features an 80 mm piston diameter and a double-acting mode of operation conforming to ISO 6431. The unit incorporates adjustable pneumatic cushioning at both ends (PPV), a male M20x1,5 piston rod thread, and position detection capabilities for proximity sensors across a stroke range of 1 to 2,000 mm. Operating within a pressure range of 0.3 to 12 bar and ambient temperatures from -20 to 80 °C, the S3 variant includes a corrosion- and acid-resistant stainless steel piston rod, a piston rod nut, and an FCM wiper seal. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 157168 is a single-acting industrial component featuring a pulling action, a 16 mm piston diameter, and a 20 mm stroke with a square piston rod for torque protection and guidance. Operating on compressed air per ISO8573-1:2010 [7:4:4] within a 1.3 to 10 bar working pressure and -20 to 80 °C ambient temperature range, this piston rod design includes flexible cushioning rings at both ends and position detection for proximity sensors. It delivers a theoretical force of 81 N on the advance stroke at 6 bar, a basic weight of 89 g for a 0 mm stroke, and a corrosion resistance classification of CRC 2. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 156883 is a double-acting industrial component featuring a 32 mm piston diameter, an 80 mm stroke, and a piston rod at one end with a guide rod and yoke for torsional protection. It operates on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 1 bar to 10 bar (0.1 MPa to 1 MPa), delivering theoretical forces of 483 N advancing and 415 N retracting at 6 bar. Constructed with elastic cushioning rings at both ends and a corrosion resistance class of 2, this unit functions across an ambient temperature range of -20 °C to 80 °C with position sensing via proximity switch. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1584947 industrial component operates at a nominal DC voltage of 565 V with a star inside winding switch, six pole pairs, and a standstill torque of 38.77 Nm. Built with insulation protection class F, a PTC resistor for temperature monitoring, and IP65 protection via a plug electrical connector system, it conforms to IEC 60034 and holds S1 rating class according to EN 60034-1. This RoHS-compliant unit functions within an ambient temperature range of -10 to 40 °C, a storage temperature range of -20 to 60 °C, and 0 to 90 percent relative air humidity while featuring CRC 2 moderate corrosion stress resistance and VDMA24364-B2-L PWIS conformity. It carries RCM Mark, c UL us Recognized, CE, and UKCA authorizations in accordance with applicable EU and UK guidelines for EMC, low voltage, and RoHS. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 158847 is a double-acting industrial component featuring a 63 mm piston diameter, an M16x1,5 piston rod thread, and an adjustable stroke length from 1 to 2,000 mm. Built with a male piston-rod end, PPV pneumatic cushioning at both ends, and an S3 variant configuration including a corrosion-resistant stainless steel piston rod and FCM wiper seal, this unit conforms to ISO 6431 standards. It operates within a 0.4 to 12 bar pressure range on dried compressed air, delivering a theoretical force of 1,761 N on the advance stroke and 1,601 N on the return stroke at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157167 is a single-acting industrial component featuring a 16 mm piston diameter, a 15 mm stroke, and a pulling action operating mode. This square piston rod design incorporates flexible cushioning rings or plates at both ends, accommodates proximity sensors for position detection, and operates within a working pressure range of 1.3 to 10 bar. It delivers a theoretical force of 81 N at 6 bar advance stroke across an ambient temperature range of -20 to 80 °C, utilizing compressed air in accordance with ISO8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1584946 is an industrial component featuring a standstill torque of 38.77 Nm, a nominal operating voltage of 565 V DC, and a winding switch type of star inside with 6 pole pairs. This unit conforms to IEC 60034, achieves insulation protection class F and IP65 protection, utilizes a PTC resistor for temperature monitoring, and operates under an S1 rating class according to EN 60034-1 within an ambient temperature range of -10 to 40 °C. Certified with RCM Mark and c UL us recognition, the device complies with EU and UKCA directives for EMC, low voltage, and RoHS alongside VDMA24364-B2-L PWIS conformity and a CRC 2 moderate corrosion stress rating. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo part number 157166 is a single-acting industrial component featuring a pulling action, a 16 mm piston diameter, and a 10 mm stroke with a square piston rod for torque protection and guidance. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a working pressure range of 1.3 to 10 bar, this unit delivers a theoretical force of 81 N at 6 bar on the advance stroke and incorporates flexible cushioning rings or plates at both ends. Designed with a single-ended piston rod, position detection capability for a proximity sensor, and a CRC 2 moderate corrosion resistance classification, it functions at ambient temperatures from -20 to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 158846 is a double-acting industrial component featuring a 50 mm piston diameter, an M16x1,5 piston rod thread with a male end, and a variable stroke ranging from 1 to 2,000 mm. Built with an ISO 6431 design structure containing a piston and piston rod, it operates on dried compressed air at pressures between 0.5 and 12 bar, delivering theoretical forces of 1,131 N on the advance stroke and 924 N on the return stroke at 6 bar. This unit includes adjustable pneumatic cushioning at both ends (PPV), position detection for proximity sensors, and S3 variants featuring a stainless steel corrosion and acid resistant piston rod, piston rod nut, and FCM wiper seal. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156882 is a double-acting industrial component featuring a 32 mm piston diameter, a 60 mm stroke, and a piston rod at one end equipped with an anti-torsion guide rod and yoke. Operating within a pressure range of 1 to 10 bar (0.1 MPa to 1 MPa), this unit utilizes compressed air conforming to ISO 8573-1:2010 [7:4:4] and accommodates oil lubrication for ongoing operation across ambient temperatures from -20 °C to 80 °C. It provides elastic cushioning rings at both ends, position sensing via proximity switch, a moderate corrosion resistance class (CRC 2), and generates theoretical forces of 483 N advancing and 415 N retracting at 6 bar. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 1584945 is an industrial component featuring a nominal operating voltage of 565 V DC, a star inside winding switch type, 6 pole pairs, and a featherkey shaft design conforming to DIN 6885 A 10 x 8 x 40. Rated IP65 with Class F insulation and an S1 rating class according to EN 60034-1, this part operates in ambient temperatures from -10 to 40 °C, withstands storage temperatures between -20 and 60 °C, and includes a PTC resistor for temperature monitoring. It conforms to IEC 60034, carries cULus recognized, RCM, CE, and UKCA marks, meets RoHS directives, and features a moderate corrosion resistance classification CRC of 2 with VDMA24364-B2-L PWIS conformity. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157165 is a single-acting industrial component featuring a pulling action, a 16 mm piston diameter, and a 5 mm stroke enabled by a square piston rod for torque protection and guiding. Operating within a 1.3 to 10 bar pressure range on compressed air conforming to ISO8573-1:2010 [7:4:4], this piston and piston-rod assembly incorporates flexible cushioning rings at both ends and accommodates proximity sensors for position detection. The unit delivers a theoretical force of 81 N on the advance stroke at 6 bar, features a CRC 2 moderate corrosion resistance classification, and functions across an ambient temperature range of -20 to 80 °C with lubricated operation subsequently required. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this Festo component.
View product details →
Festo
The Festo 158845 is a double-acting industrial component featuring a 40 mm piston diameter, an M12x1,25 male piston-rod thread, and a stroke length adjustable from 1 to 2,000 mm. Built with a piston and piston rod design conforming to ISO 6431, it operates between 0.6 and 12 bar using dried compressed air and incorporates adjustable pneumatic cushioning at both ends with a 21 mm cushioning length. This unit includes S3 variants with a corrosion- and acid-resistant stainless steel piston rod, a piston rod nut, and an FCM wiper seal, operating in ambient temperatures from -20 to 80 °C with Germanischer Lloyd authorization. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →