Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 1565761 is an industrial component featuring dimensions of 71 mm x 110 mm x 38.25 mm and a capacity for a maximum of 8 valve positions in any mounting position. It operates on a nominal DC voltage of 24 V, supporting an operating voltage range of 18 V to 30 V for electronics and sensors, and 21.6 V to 26.4 V for load voltage with reverse polarity protection. Equipped with I-Port and IO-Link communication protocols, this unit includes load supply undervoltage diagnostics, ATEX and UKEX Zone 2 explosion protection for gas, and a corrosion resistance class of 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 157237 is a single-acting industrial component featuring a 50 mm piston diameter, a 15 mm stroke, and a pulling mode of operation with an internal M8 piston rod thread. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 0.8 bar to 10 bar, this unit achieves a theoretical force of 999 N at 6 bar advancing. It incorporates elastic cushioning rings at both ends, position sensing via proximity switch, and a corrosion resistance class of CRC 2 for moderate environmental stress. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156983 is a single-acting industrial component featuring a 16 mm piston diameter, a 15 mm stroke, and an M8 external piston rod thread at one end. Designed for compressed air operation within a pressure range of 1.3 bar to 10 bar, this unit delivers a theoretical advancing force of 111 N at 6 bar and utilizes elastic cushioning rings at both ends. It operates within an ambient temperature range of -20 °C to 80 °C, provides position sensing via proximity switch, and features a moderate corrosion resistance class rating of CRC 2. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156814 is a double-acting industrial component featuring a 50 mm piston diameter, a 50 mm stroke, and a square piston rod at one end that provides protection against torsion. Operating within a pressure range of 0.1 MPa to 1 MPa (1 bar to 10 bar / 14.5 psi to 145 psi), this unit utilizes compressed air per ISO 8573-1:2010 [7:4:4] and incorporates elastic cushioning rings at both ends with an impact energy capacity of 0.64 J. It delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, functions across an ambient temperature range of -20 °C to 80 °C in any mounting position, and supports position sensing via proximity sensors. Submit your exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 156576 is a double-acting industrial component featuring an 80 mm piston diameter, an 80 mm stroke, and a piston rod end with an internal M10 thread. Designed with a structural layout of a piston and piston rod operating on compressed air conforming to ISO 8573-1:2010 [7:4:4], it delivers a theoretical force of 3016 N advancing and 2827 N retracting at 6 bar across an operating pressure range of 0.06 MPa to 1 MPa. This unit incorporates elastic cushioning rings at both ends, position sensing via a proximity switch, an ambient temperature range of -20 °C to 80 °C, and a corrosion resistance class rating of 2. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 157236 is a single-acting pulling industrial component featuring a 50 mm piston diameter, a 10 mm stroke, and an internal M8 piston rod thread at one end. Operating on compressed air compliant with ISO 8573-1:2010 [7:4:4] within a pressure range of 0.8 bar to 10 bar, this unit incorporates elastic cushioning rings at both ends and allows position sensing via proximity switch. It delivers a theoretical force of 999 N at 6 bar advancing, handles an ambient temperature range of -20 °C to 80 °C, and rates at corrosion resistance class 2 with VDMA24364-B1/B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1569829 is an industrial component featuring a nominal DC voltage of 565 V, four pole pairs, a standstill torque of 0.99 Nm, and a nominal torque of 0.68 Nm with an S1 rating class according to EN 60034-1. Constructed with insulation protection class F and an IP65 protection class, this unit includes a PTC resistor for temperature monitoring, a featherkey shaft design complying with DIN 6885 A 3 x 3 x 14, and a star inside winding switch type. It conforms to IEC 60034, carries RCM and c UL us authorizations, and meets EU-EMV and low voltage guidelines with RoHS-compliant materials and a CRC 2 moderate corrosion stress classification. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 156813 is a double-acting industrial component featuring a 50 mm piston diameter, a 40 mm stroke, and a square piston rod providing anti-torsion guidance. Operating at pressures from 1 to 10 bar (14.5 to 145 psi), this piston and piston rod assembly delivers a theoretical advancing force of 1178 N and a retracting force of 1057 N at 6 bar using compressed air per ISO 8573-1:2010 [7:4:4]. It incorporates elastic cushioning rings at both ends, position sensing for proximity sensors, and a moderate corrosion resistance class (CRC 2) across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
The Festo 156575 is a double-acting industrial component featuring an 80 mm piston diameter and a 60 mm stroke with a piston rod at one end. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] across a pressure range of 0.06 MPa to 1 MPa, this unit utilizes elastic cushioning rings at both ends and provides position sensing via proximity switch. It delivers a theoretical advancing force of 3016 N and retracting force of 2827 N at 6 bar while accommodating an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 157235 is a single-acting industrial component featuring a 40 mm piston diameter, a 25 mm stroke, and an internal M6 piston rod thread for pulling operation. It operates within a pressure range of 0.8 bar to 10 bar (11.6 psi to 145 psi) using compressed air conforming to ISO 8573-1:2010 [7:4:4], with oil lubrication permitted. Designed with elastic cushioning rings at both ends, a moderate corrosion resistance class of CRC 2, and position sensing via proximity switch, this unit functions in any mounting position across ambient temperatures from -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1569828 is an industrial component featuring a standstill torque of 0.99 Nm, a nominal torque of 0.68 Nm, and a nominal operating voltage of 565 V DC with 4 pole pairs. Built with insulation protection class F, an IP65 rating, and a DIN 6885 A 3 x 3 x 14 featherkey shaft design, it operates within an ambient temperature range of -10 to 40 °C and conforms to IEC 60034 standards. It includes PTC resistor temperature monitoring, features a plug electrical connector system, and carries RCM Mark and c UL us Recognized authorizations in accordance with EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 156574 is a double-acting industrial component featuring an 80 mm piston diameter, a 50 mm stroke, and an internal M10 piston rod thread at one end. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 0.06 MPa to 1 MPa (0.6 bar to 10 bar / 8.7 psi to 145 psi), it incorporates elastic cushioning rings at both ends and allows for position sensing via proximity switch. This unit delivers a theoretical force of 3016 N advancing and 2827 N retracting at 6 bar, functioning across an ambient temperature range of -20 °C to 80 °C with moderate corrosion stress resistance (CRC 2). Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156812 is a double-acting industrial component featuring a 50 mm piston diameter, a 30 mm stroke, and a square piston rod at one end providing protection against torsion. Designed with elastic cushioning rings at both ends and integrated position sensing for a proximity sensor, this unit operates within a pressure range of 1 bar to 10 bar and an ambient temperature range of -20 °C to 80 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It delivers a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, exhibits a CRC rating of 2 for moderate corrosion stress, and permits operation with oil lubrication. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo industrial component, part number 1569827, features a nominal operating voltage of 565 V DC, a standstill torque of 0.99 Nm, and a nominal torque of 0.68 Nm with 4 pole pairs and an internal star winding switch. Built with an IP65 protection class, insulation class F, and CRC 2 moderate corrosion resistance, it operates within an ambient temperature range of -10 to 40 °C and conforms to IEC 60034 and EN 60034-1 S1 rating standards. This unit includes a PTC resistor for temperature monitoring, a DIN 6885 A 3 x 3 x 14 featherkey shaft design, a plug electrical connector system, and holds c UL us recognized, RCM, and RoHS-compliant certifications alongside CE conformity to EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 157234 is a single-acting industrial component featuring a pulling mode of operation, a 40 mm piston diameter, and a 20 mm stroke with an M6 internal thread on the piston rod end. This model operates within a pressure range of 0.8 bar to 10 bar utilizing compressed air conforming to ISO 8573-1:2010 [7:4:4], supporting oil-lubricated operation and offering a moderate corrosion resistance class of CRC 2. Position sensing is achieved via a proximity switch alongside elastic cushioning rings at both ends designed to absorb 0.52 J of impact energy. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156573 is a double-acting industrial component featuring an 80 mm piston diameter, a 40 mm stroke, and an internal M10 piston rod thread at one end. Operating on compressed air within a pressure range of 0.6 bar to 10 bar, this unit incorporates elastic cushioning rings at both ends to absorb 0.75 J of impact energy and utilizes proximity switches for position sensing. It delivers a theoretical advancing force of 3016 N and a retracting force of 2827 N at 6 bar while functioning across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 1569826 is an industrial component featuring a nominal operating voltage of 565 V DC, a standstill torque of 0.99 Nm, a nominal torque of 0.68 Nm, and a peak torque of 3.8 Nm. Built with 4 pole pairs, a star inside winding switch, and an IP65 protection class, this unit operates within an ambient temperature range of -10 to 40 °C and conforms to IEC 60034 standards with insulation class F and rating class S1. It holds RCM Mark and c UL us - Recognized (OL) authorizations while complying with EU-EMV and low voltage guidelines under RoHS material notes. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 156811 is a double-acting industrial component featuring a 50 mm piston diameter, a 25 mm stroke, and a square piston rod for torsion protection and guidance. Operating within a pressure range of 1 bar to 10 bar (14.5 psi to 145 psi) and an ambient temperature range of -20 °C to 80 °C, this unit utilizes compressed air per ISO 8573-1:2010 [7:4:4] with elastic cushioning rings at both ends and provisions for position sensing via proximity sensor. It achieves a theoretical force of 1178 N advancing and 1057 N retracting at 6 bar, exhibits a CRC rating of 2 for moderate corrosion stress, and requires oil lubrication for continued operation once initiated. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 157233 is a single-acting industrial component featuring a 40 mm piston diameter and a 15 mm stroke with a pulling mode of operation. This unit includes a piston rod with an internal M6 thread, elastic cushioning rings at both ends, and provisions for position sensing via proximity switch across an operating pressure range of 0.8 bar to 10 bar. Designed with a moderate corrosion resistance class of 2 and an ambient temperature range of -20 °C to 80 °C, it operates using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Submit your required quantity and application requirements for an immediate quote on this exact part number.
View product details →
Festo
The Festo 1569825 industrial component operates at a nominal DC voltage of 565 V with a star inside winding switch, 4 pole pairs, a standstill torque of 0.99 Nm, a nominal torque of 0.68 Nm, and a peak torque of 3.8 Nm. Built with insulation protection class F, PTC resistor temperature monitoring, and an IP65 protection class, this unit conforms to IEC 60034, achieves rating class S1 according to EN 60034-1, and features a plug electrical connector system. It functions within an ambient temperature range of -10 to 40 °C, a storage temperature range of -20 to 60 °C, and 0 to 90% relative air humidity while offering moderate corrosion stress resistance (CRC 2) and RoHS-conforming materials. The assembly carries RCM Mark and c UL us Recognized (OL) authorizations alongside CE compliance according to EU-EMV and low voltage guidelines. Submit the exact part number, quantity, and application requirements for a quote.
View product details →