Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 1310185 is a double-acting industrial component featuring a structural lever design with two gripper jaws and a size 40 bracket function. It operates within a pressure range of 4 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], achieving a repetition accuracy of 0.04 mm, a maximum opening angle of 40 degrees, and an operating frequency up to 3 Hz. Position sensing is accomplished via a proximity switch, while gripping force backup occurs during closing alongside a maximum interchangeability and rotational symmetry of 0.2 mm. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo industrial component 130803 is a standard T-shaped pneumatic fitting featuring a 4.8 mm nominal width, 17 mm tubing insertion depth, and connection for 6 mm outside diameter pneumatic tubing across 1 supply line and 2 outlets. Operating via a push-pull principle in any mounting position, it handles compressed air per ISO 8573-1:2010 [7:-:-] or liquid water at pressures from -0.095 MPa to 1.4 MPa depending on temperature, and supports lubricated operation. Each pack size contains 100 units weighing 11 g each, rated for ambient temperatures between -10 °C and 80 °C, low corrosion stress (CRC 1), VDMA24364-B1/B2-L LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit part number 130803, desired quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1310184 is a double-acting industrial pneumatic gripper featuring a size 40 lever structural design with two gripper jaws and a bracket gripper function. This component operates on compressed air as per ISO 8573-1:2010 [7:4:4] within an operating pressure range of 2 bar to 8 bar, delivering a repetition accuracy of 0.04 mm, a max. interchangeability and rotational symmetry of 0.2 mm, and a max. opening angle of 40 degrees. Position sensing is accomplished via a proximity switch, supporting a max. operating frequency of 3 Hz alongside a min. opening time of 63 ms and min. closing time of 96 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 130802 is a T-shaped industrial component featuring a standard size, a 2.8 mm nominal width, and a 14.9 mm tubing insertion depth utilizing the push-pull principle. It accommodates one supply line and two outlets for 4 mm outside diameter pneumatic tubing, operating with compressed air or liquid water across an ambient temperature range of -10 °C to 80 °C. This pack of 100 parts supports lubricated operation, exhibits a CRC 1 corrosion resistance rating, and meets ISO 14644-1 Class 4 cleanroom standards. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 1310183 is a size 32 double-acting pneumatic gripper featuring a 2-jaw lever structural design with a bracket gripper function and gripping force backup during closing. Operating within a pressure range of 4 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], this component achieves a repetition accuracy of 0.04 mm, a maximum opening angle of 40 degrees, and position sensing via proximity switch. It supports any mounting position, a maximum operating frequency of 3 Hz, a minimum opening time of 88 ms at 6 bar, and a minimum closing time of 55 ms at 6 bar, alongside a corrosion resistance class of 1 and LABS conformity to VDMA24364-B2-L. Please submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
This standard Festo industrial component, part number 130801, features a T-shape design with one supply line and two outlets utilizing the push-pull principle for a nominal width of 10 mm and a tubing insertion depth of 23.4 mm. The unit operates with compressed air or liquid water across an ambient temperature range of -10 °C to 80 °C, supporting variable operating pressures up to 1.4 MPa depending on temperature. Each pack contains 20 units with a product weight of 48 g each, featuring a coated screwed plug seal and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1310182 is a double-acting industrial component featuring a lever structural design with two bracket-style gripper jaws in size 32. It operates at a pressure range of 2 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], achieving a pneumatic gripper repetition accuracy of 0.04 mm with a maximum operating frequency of 3 Hz. Position sensing is accomplished via proximity switch, while operating media with oil lubrication is possible and required for further use. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 130800 is a standard-size T-shaped industrial component featuring a nominal width of 8.3 mm, a 20.2 mm tubing insertion depth, and a push-pull structural design with two outlets and one supply line. It utilizes a coated seal on the screwed plug, operates within ambient temperatures from -10 °C to 80 °C, and supports compressed air as per ISO 8573-1:2010 [7:-:-] or liquid water at pressures up to 0.6 MPa at 50 °C. Each pack contains 20 units with a product weight of 42 g each, featuring a low corrosion stress rating (CRC 1) and ISO Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1310181 is a double-acting industrial component featuring two lever-style gripper jaws in a size 25 bracket function with a maximum opening angle of 40 degrees. This pneumatic gripper operates at pressures between 4 bar and 8 bar using compressed air meeting ISO 8573-1:2010 [7:4:4] standards, delivering a repetition accuracy of 0.04 mm, a maximum operating frequency of 3 Hz, and a gripping force backup during closing. Position sensing is achieved via a proximity switch, while the structural design supports any mounting position, a maximum interchangeability and rotational symmetry of 0.2 mm, and a corrosion resistance class of 1 with VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
The Festo 130799 is a standard T-shaped industrial component featuring a nominal width of 6.7 mm and a tubing insertion depth of 18.1 mm with two outlets and one supply line utilizing the push-pull principle. Operating with compressed air as per ISO 8573-1:2010 [7:-:-] or liquid water, it supports an operating pressure of -0.095 MPa to 0.6 MPa across the full temperature range of -10 °C to 80 °C and features a coated screwed plug seal with any mounting position. This pack size of 50 units has a product weight of 35 g each, a corrosion resistance class of 1, and meets ISO 14644-1 cleanroom suitability class 4. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo size 25 industrial component (part number 1310180) is a double-acting lever-type pneumatic gripper featuring two bracket jaws with a maximum opening angle of 40 degrees, a repetition accuracy of 0.04 mm, and a maximum operating frequency of 3 Hz. It operates within a pressure range of 2 bar to 8 bar using compressed air conforming to ISO 8573-1:2010 [7:4:4], achieves a minimum opening time of 64 ms and closing time of 80 ms at 6 bar, and utilizes proximity switches for position sensing. This unit has a VDMA24364-B2-L LABS conformity rating, a corrosion resistance class of 1, and meets Li-ion battery production suitability requirements by excluding metals with greater than 5% copper mass while supporting oil-lubricated operation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 130798 is a T-shaped industrial component featuring a nominal width of 8 mm, a standard size, and a tubing insertion depth of 20.2 mm based on the push-pull principle. It incorporates a coated screwed plug seal, accommodates any mounting position, and contains one supply line alongside two outlets with a product weight of 31 g. Operating parameters include an operating pressure of -0.095 MPa to 0.6 MPa across the entire temperature range, temperature-dependent operating pressure up to 1.4 MPa, an ambient temperature range of -10 °C to 80 °C, and compatibility with compressed air and liquid water. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 1310179 is a double-acting industrial component featuring a lever structural design with two bracket gripper jaws operating within a 4 bar to 8 bar compressed air range as per ISO 8573-1:2010 [7:4:4]. This pneumatic gripper delivers a repetition accuracy of 0.04 mm, a maximum opening angle of 40 degrees, and a gripping force backup during closing, while supporting position sensing via a proximity switch and an operating frequency up to 4 Hz. Built with a size 16 specification, 0.2 mm maximum interchangeability, 0.2 mm rotational symmetry, a corrosion resistance class of 1, and VDMA24364-B2-L LABS conformity, it achieves a minimum opening time of 62 ms and minimum closing time of 36 ms at 6 bar in any mounting position with oil lubrication operation possible. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 130797 is a standard T-shaped industrial component featuring a 6.7 mm nominal width, an 18.1 mm tubing insertion depth, and one supply line with two outlets based on a push-pull structural design. This part operates with compressed air according to ISO 8573-1:2010 [7:-:-] or liquid water across an ambient temperature range of -10 °C to 80 °C, utilizing a coated seal on the screwed plug and supporting any mounting position. With a product weight of 25 g, a CRC rating of 1, and ISO 14644-1 Class 4 cleanroom suitability, it accommodates operating pressures from -0.095 MPa to 0.6 MPa across its entire temperature range. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 130796 is a standard T-shaped industrial component featuring a 4.3 mm nominal width, 17 mm tubing insertion depth, one supply line, and two outlets utilizing a push-pull structural design with a coated screwed plug seal. This unit operates within a temperature range of -10 °C to 80 °C, supporting compressed air and liquid water media with operating pressures ranging from -0.095 MPa to 1.4 MPa depending on temperature. Built with corrosion resistance class 1 and ISO 14644-1 Class 4 cleanroom suitability, each pack contains 100 units weighing 22 g each with an unspecified mounting position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
This Festo industrial component (part number 1310178) is a double-acting pneumatic gripper featuring a size 16 bracket function, a lever structural design, and two gripper jaws with a maximum opening angle of 40 degrees. It operates within a pressure range of 2 bar to 8 bar using compressed air as per ISO 8573-1:2010 [7:4:4], achieving a repetition accuracy of 0.04 mm, a maximum operating frequency of 4 Hz, and minimum opening and closing times of 44 ms and 52 ms at 6 bar, respectively. Position sensing is accomplished via proximity switch, and the unit accommodates any mounting position while meeting CRC 1 corrosion resistance and VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 130795 is a standard T-shaped industrial component featuring a nominal width of 6 mm, two outlets, one supply line, and an 18.1 mm tubing insertion depth utilizing a push-pull structural design with a coated screwed plug seal. Weighing 19 g, it operates within an ambient temperature range of -10 °C to 80 °C, supporting compressed air per ISO 8573-1:2010 [7:-:-] or liquid, ice-free water with lubricated operation possible. Operating pressures span -0.095 MPa to 0.6 MPa across the entire temperature range, and -0.095 MPa to 1.4 MPa depending on temperature, alongside a maximum water operating pressure of 0.6 MPa at 50 °C. This unit features a CRC of 1, VDMA24364-B1/B2-L LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, any mounting position, and is supplied in a pack size of 50. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 1310177 is a double-acting industrial component featuring a lever structural design with two gripper jaws in a bracket configuration and a size 10 profile. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a 2 bar to 8 bar pressure range, this pneumatic gripper achieves a repetition accuracy of 0.04 mm, a max interchangeability and rotational symmetry of 0.2 mm, a max opening angle of 40 degrees, and an operating frequency up to 4 Hz. It includes position sensing for a Hall sensor, offers an installation in any mounting position, and is rated for a minimum opening time of 10 ms and closing time of 22 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 130794 is a standard T-shaped industrial component featuring a nominal width of 4.2 mm, a tubing insertion depth of 17 mm, and a push-pull structural design with a coated screwed plug seal. This unit accommodates one supply line and two outlets, operating with compressed air or liquid water across an ambient temperature range of -10 °C to 80 °C and supporting lubricated operation. It weighs 14 g, exhibits a corrosion resistance class of 1, and conforms to VDMA24364-B1/B2-L LABS requirements with ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1310167 is a double-acting radial pneumatic gripper featuring two positively driven gripper jaws with a size 40 specification and a maximum opening angle of 180 degrees. Operating within a pressure range of 4 bar to 8 bar using compressed air per ISO 8573-1:2010 [7:4:4], it achieves a repetition accuracy of 0.1 mm, a maximum operating frequency of 2 Hz, and includes a gripping force backup during closing. Position sensing is accomplished via proximity switch, while the structural design supports any mounting position with a corrosion resistance class of CRC 1 and LABS conformity to VDMA24364-B2-L. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →