Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
This Festo industrial component features a 12 mm piston diameter, a 30 mm stroke, and a yoke drive unit operating mode with a recirculating ball bearing guide. Designed for double-acting operation with compressed air according to ISO 8573-1:2010 [7:4:4] at operating pressures from 0.2 MPa to 1 MPa, the unit incorporates elastic cushioning rings at both ends and position sensing via proximity switch. It offers an ambient temperature range of -5 °C to 60 °C, a maximum speed of 0.8 m/s, and a distance of centre of gravity of payload to yoke plate xs of 25 mm, with specific exclusions for metals containing copper, zinc, or nickel by mass. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8113002 is a standard L-shape industrial component featuring a nominal width of 2.5 mm, an internal thread G1/8 pneumatic connection 1, and a pneumatic connection 2 for 4 mm outside diameter tubing. Constructed with a nickel-plated brass and PBT housing featuring an external hexagon SW14 mounting type, this push-pull design operates within a pressure range of -0.095 MPa to 0.8 MPa for compressed air media and accommodates any mounting position. Supplied in a pack size of 10 with a blue releasing ring, the 14.67 g unit meets ISO 14644-1 Class 4 cleanroom suitability and VDMA24364 Zone III LABS conformity with a CRC of 1. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo part number 8116795 is a pneumatic industrial component featuring a size 16 parallel gripper function with two gripper jaws and a single-acting, open mode of operation. This unit utilizes a ball guide with a stroke of 3 mm per gripper jaw, a repetition accuracy of 0.02 mm, and an operating pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, 36.25 psi to 116 psi). Supported by a max operating frequency of 3 Hz along with position sensing for a proximity sensor, the hardware achieves a minimum opening time of 29 ms and a closing time of 11 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo size 4 industrial component, part number 8114689, features a die-cast aluminum housing secured with steel screws and weighs 77 g. This RoHS compliant unit conforms to VDMA24364-B2-L LABS (PWIS) standards. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8113001 is a standard-sized L-shaped industrial component featuring a 2.5 mm nominal width, an M5 internal thread for pneumatic connection 1, and a connection for 4 mm outside diameter pneumatic tubing at connection 2. Operating via the push-pull principle, this part supports compressed air media as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.095 MPa to 0.8 MPa and ambient temperatures from -5 °C to 60 °C. Each pack contains 10 units with a product weight of 8.07 g each, utilizing an external hexagon SW10 mounting type with a nominal tightening torque of 0.8 Nm (±5% tolerance). Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8118633 is a double-acting industrial component featuring a 12 mm piston diameter, a 25 mm stroke, and a yoke drive unit operating mode with a recirculating ball bearing guide. It operates on compressed air as per ISO 8573-1:2010 [7:4:4] within an operating pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and achieves a maximum speed of 0.8 m/s with elastic cushioning rings or pads at both ends. This unit includes position sensing via proximity switch, features ISO 14644-1 Class 6 cleanroom suitability, and complies with VDMA24364-B1/B2-L LABS conformity for reduced copper, zinc, and nickel usage. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8116794 is a pneumatic parallel gripper featuring two gripper jaws with a size 16 specification and a stroke of 3 mm per jaw. This single-acting, open-mode component utilizes a ball guide and lever structural design with a positively driven motion sequence, operating within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar). It achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and supports position sensing via proximity sensors in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8114688 is a 32 mm wide industrial component featuring a switchable 5/2- or 3/2-way valve function with an electrical actuation type and a plate seat structural design. This piloted unit operates at a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar), delivers a normal nominal flow rate of 800 l/min, and utilizes a NAMUR connection pattern for the pneumatic working port conforming to the VDI/VDE 3845 standard. Featuring internal pilot air supply, a soft sealing principle, a mechanical spring reset method, adjustable exhaust air function, and a negative overlap lap, the device operates with an off switching time of 6 ms and requires a separately ordered solenoid coil for operating voltage. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8113000 is a straight industrial component featuring a 14 mm nominal width, an internal thread G1/2 pneumatic connection 1, and a pneumatic connection 2 for 16 mm outside diameter tubing. Built with a nickel-plated brass housing, an external hexagon SW24 mounting type, and a push-pull structural design, this standard-sized component operates across a pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Each pack contains 5 units, featuring a blue releasing ring, class 1 corrosion resistance, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8118632 is a double-acting industrial drive unit featuring a 12 mm piston diameter, a 20 mm stroke, and a yoke drive operating mode with a 25 mm distance of the center of gravity of the payload to the yoke plate. It incorporates elastic cushioning rings or pads at both ends, recirculating ball bearing guides, and position sensing via proximity switch for operation across an operating pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s. Constructed with ISO 8573-1:2010 [7:4:4] compressed air compatibility and oil lubrication capability, this component meets ISO 14644-1 Class 6 cleanroom standards and VDMA24364-B1/B2-L LABS conformity with reduced copper, zinc, and nickel values suitable for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116793 is a pneumatic industrial component featuring a size 16 parallel gripper function with two jaws and a single-acting, open mode of operation. This unit delivers a stroke of 3 mm per gripper jaw, a repetition accuracy of 0.02 mm, and an operating pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar). Built with a ball guide and a positively driven motion sequence utilizing a lever, it supports a maximum operating frequency of 3 Hz with minimum opening and closing times of 29 ms and 11 ms at 6 bar, respectively. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8114687 is a 5/2-way bistable industrial component featuring a 32 mm width and a plate seat structural design with a soft sealing principle. This piloted valve operates at a pressure range of 0.15 MPa to 0.8 MPa (1.5 bar to 8 bar) with a normal nominal flow rate of 1000 l/min, a non-reversible flow direction, and an internal pilot air supply port. It includes an adjustable exhaust air function, a negative overlap lap, and a 2 ms changeover time while supporting a 100% duty cycle in any mounting position via a NAMUR connection pattern conforming to standard VDI/VDE 3845. Operating voltage and coil characteristics depend on the solenoid coil, which is to be ordered separately and functions without a manual override. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo part number 8112999 is a standard straight-design industrial component featuring a G1/2 internal thread for pneumatic connection 1 and a connection for 12 mm outside diameter pneumatic tubing for pneumatic connection 2. Built with a nickel-plated brass housing, this unit operates with compressed air according to ISO 8573-1:2010 [7:4:4] across a pressure range of -0.95 bar to 8 bar and ambient temperatures from -5 °C to 60 °C. The assembly utilizes a push-pull structural design with an external hexagon SW24 mounting type, weighs 48.53 g, and is packaged in a pack size of 5. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8118631, features a 12 mm piston diameter with a 10 mm stroke and operates in a double-acting yoke drive mode utilizing compressed air as per ISO 8573-1:2010 [7:4:4]. The unit incorporates a recirculating ball bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s. Constructed with a 25 mm distance of the centre of gravity of the payload to the yoke plate xs, it achieves ISO 14644-1 Cleanroom Class 6 suitability and VDMA24364-B1/B2-L LABS conformity for battery production with reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8116792 is a pneumatic industrial component featuring a size 16 parallel gripper function with two jaws and a ball guide. It operates as a single-acting, open mode device with a stroke of 3 mm per gripper jaw, a repetition accuracy of 0.02 mm, and an operating pressure range of 0.25 MPa to 0.8 MPa. This unit supports position sensing via proximity switch, side mounting for gripper fingers, and achieves a maximum operating frequency of 3 Hz with a minimum opening time of 29 ms and closing time of 11 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8112998 is a standard straight industrial component featuring a 10 mm nominal width, an internal thread G3/8 pneumatic connection 1, and a pneumatic connection 2 for a 12 mm outside diameter pneumatic tubing utilizing a push-pull structural design with a blue releasing ring. Constructed with a nickel-plated brass housing, external hexagon SW21 mounting, and any mounting position, this component operates across a temperature range of -5 °C to 60 °C with an operating pressure of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar | -13.775 psi to 116 psi) for compressed air per ISO 8573-1:2010 [7:4:4]. This RoHS-compliant part comes in a pack size of 5, weighs 40.93 g, features VDMA24364 Zone III LABS conformity, Class 4 cleanroom suitability per ISO 14644-14, and CRC 1 low corrosion stress, while supporting lubricated operation. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8114686 is a 32 mm wide electrical 5/3-way closed piston gate valve featuring a soft sealing principle and internal pilot air supply port with a NAMUR pneumatic working port connection pattern. It operates within a pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), provides a normal nominal flow rate of 1250 l/min normalized to DIN 1343, and utilizes a mechanical spring reset method with an adjustable exhaust air function. This piloted component conforms to the VDI/VDE 3845 standard, incorporates a positive overlap lap, and requires a solenoid coil ordered separately for its operating voltage. Please submit your exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118630 is a double-acting industrial drive unit featuring a 12 mm piston diameter, a 100 mm stroke, and a yoke drive mode with elastic cushioning rings or pads at both ends. Designed with a plain-bearing guide and a yoke plate payload center of gravity distance xs of 25 mm, this component operates on compressed air according to ISO 8573-1:2010 [7:4:4] within a 0.2 MPa to 1 MPa pressure range and achieves a maximum speed of 0.8 m/s. It includes position sensing via proximity switch, allows any mounting position, meets VDMA24364-B1/B2-L LABS conformity with specific metal exclusions, and maintains ISO 14644-1 cleanroom Class 6 suitability alongside an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 8112997 is a straight-design industrial component featuring a push-pull structural design, an 8 mm nominal width, an internal thread G3/8 pneumatic connection 1, and a pneumatic connection 2 for a 10 mm outside diameter tubing. This standard-sized nickel-plated brass housing incorporates an external hexagon SW21 mounting type with a blue releasing ring, operates with compressed air within a -0.95 bar to 8 bar pressure range, and is packaged in a pack size of 5. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component (Part Number: 8116791) is a pneumatic parallel gripper featuring two jaws, a size 16 rating, and a stroke of 3 mm per gripper jaw. The single-acting, open-mode device utilizes a ball guide and lever structural design with a positively driven motion sequence, lateral connection direction, and gripping force backup on opening. Operating within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi), it achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and position sensing via proximity switch. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →