Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8113221 is a straight industrial component featuring a 13 mm nominal width, a standard size, and a push-pull structural design with a 16 mm push-in sleeve for both pneumatic connection 1 and pneumatic connection 2. Fabricated with a PBT housing, a POM blue releasing ring, and weighing 4.42 g, this part operates with compressed air according to ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C. It offers any mounting position, Class 4 cleanroom suitability per ISO 14644-1, VDMA24364 Zone III LABS conformity, CRC 1 low corrosion stress resistance, and RoHS compliance while supporting lubricated operation. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component (Part Number 8116765) is a pneumatic parallel gripper featuring a size 10 designation, a 2 mm stroke per gripper jaw, and a single-acting closed mode of operation. Equipped with a ball guide and a lever structural design with lateral connection direction, it delivers a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and an operating pressure range of 0.35 MPa to 0.8 MPa (3.5 bar to 8 bar). The unit supports position sensing via proximity switch, features gripping force backup during closing, and excludes specific metals with copper, zinc, or nickel by mass as the main constituent. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8112960 is an L-shaped industrial component featuring a nominal width of 9.3 mm, an R1/2 external thread for pneumatic connection 1, and a connection for 10 mm outside diameter pneumatic tubing for connection 2. Featuring a push-pull structural design with a blue releasing ring and a coating seal on the screwed plug, this unit operates across a pressure range of -0.095 MPa to 0.8 MPa using compressed air conforming to ISO 8573-1:2010 [7:4:4]. Supplied in a pack size of five with a product weight of 41.85 g each, the assembly offers an external hexagon SW21 mounting type, an ambient temperature range of -5 °C to 60 °C, and class 4 cleanroom suitability according to ISO 14644-1. Submit the exact part number, quantity, and application requirements for a formal quotation.
View product details →
Festo
The Festo 8118323 is an electrical industrial component weighing 580 g that supports any mounting position and operates at a 100% duty cycle with class H insulation. Its coil characteristics accommodate 24 V AC at 50/60 Hz with 12.0 VA power or 24 V DC at 12.0 W, allowing permissible voltage fluctuations of -15% / +10%. Featuring an IP66 degree of protection, an M20x1.5 cable entry thread terminal box, and RoHS compliant materials, the unit includes EPL Db (KR) and EPL Gb (KR) explosion protection certifications for Zone 1 and Zone 21 with Ex e mb IIC T4 gas and Ex tD A21 IP66 T120°C dust ignition protection across an explosive ambient temperature range of -25°C to +40°C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8113220, features a straight design with a standard size and a 9 mm nominal width. The unit utilizes a push-pull structural design connecting a 16 mm push-in sleeve to a 12 mm push-in sleeve with a blue releasing ring, operating between -0.95 bar and 8 bar within an ambient temperature range of -5 °C to 60 °C. Constructed with a PBT housing and a POM releasing ring, the 5.45 g component supports compressed air media per ISO 8573-1:2010 [7:4:4] with lubricated operation possible. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
This standard L-shape industrial component from Festo features an R1/2 external thread for pneumatic connection 1 and accommodates an 8 mm outside diameter pneumatic tubing at connection 2, utilizing a push-pull structural design with a blue releasing ring. Rated for an operating pressure of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) across an ambient temperature range of -5 °C to 60 °C, the unit operates with compressed air as per ISO 8573-1:2010 [7:4:4] and permits lubricated operation. Supplied in a pack size of 5 with a product weight of 39.94 g each, the assembly incorporates a coated screwed plug with an external hexagon SW21 mounting type, CRC 1 low corrosion stress, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit part number 8112959, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118322 is an electrical industrial component featuring a 100% duty cycle, Class H insulation, and internal fuse protection with a product weight of 580 g. It operates on 24 V AC (50/60 Hz, 12.0 VA) or 24 V DC (12.0 W) with permissible voltage fluctuations of -15% / +10%, and connects via a terminal box with an M20x1.5 cable entry thread. Certified for Zone 1 and Zone 21 explosive environments with EPL Gb and EPL Db ratings, it includes Ex e mb IIC T4 gas and Ex tD A21 IP66 T120°C dust ignition protection across an ambient temperature range of -25°C to +40°C. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8113219 is a standard straight industrial component featuring a 9 mm nominal width and push-pull structural design with Ø 12 mm push-in sleeve pneumatic connections on both sides. Constructed with a PBT housing and a blue POM releasing ring, this pack of 10 components supports an operating pressure range of -0.095 MPa to 0.8 MPa for compressed air media according to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Each 3.12 g RoHS-compliant unit offers any mounting position, CRC 1 low corrosion stress, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability while permitting lubricated operation. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 8116764 is a Size 10 pneumatic parallel gripper featuring two jaws with a stroke of 2 mm per jaw and a single-acting, open mode of operation with gripping force backup on opening. This component utilizes a ball guide with a positively driven motion sequence, achieving a repetition accuracy of 0.02 mm, a maximum interchangeability of 0.2 mm, zero gripper jaw angular play, and zero backlash. Operating at pressures from 0.35 MPa to 0.8 MPa (3.5 bar to 8 bar, 50.75 psi to 116 psi) with a maximum operating frequency of 3 Hz and a minimum opening time of 28 ms at 6 bar, it supports position sensing via proximity sensors and allows mounting in any position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8112958 is a standard-sized L-shaped industrial component featuring a 4 mm nominal width, an R1/2 external thread for pneumatic connection 1, and a push-pull design accommodating 6 mm outside diameter pneumatic tubing at connection 2. This part operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air per ISO 8573-1:2010 [7:4:4] and includes a coated screwed plug with an external hexagon SW21 mounting type. Designed for any mounting position at ambient temperatures from -5 °C to 60 °C, the unit features a blue releasing ring, a weight of 44.89 g, and a CRC rating of 1 with VDMA24364 Zone III LABS conformity. Submit part number 8112958, desired pack size quantity, and application requirements to request a formal quote.
View product details →
Festo
The Festo 8118321 is an electrical industrial component weighing 580 g featuring a 100% duty cycle, Class H insulation, and a 60 V DC coil drawing 12.0 W with permissible voltage fluctuations of -15% / +10%. It incorporates an IP66 terminal box with an M20x1.5 cable entry thread, allows any mounting position without switching position indication, and complies with VDMA24364 Zone III LABS conformity and RoHS material requirements. Certified for Zone 1 and Zone 21 hazardous locations under EPL Gb and EPL Db ratings with ignition protection types Ex e mb IIC T4 and Ex tD A21 IP66 T120°C, it operates within an ambient temperature range of -25°C to +40°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8113218 is a straight industrial component featuring a nominal width of 7.5 mm and a push-pull structural design with a 12 mm push-in sleeve for pneumatic connection 1 and a 10 mm push-in sleeve for pneumatic connection 2. Supplied in a pack size of 10 with a product weight of 2.71 g each, this PBT housing part with a blue POM releasing ring operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air according to ISO 8573-1:2010 [7:4:4]. It offers an ambient temperature range of -5 °C to 60 °C, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance while supporting lubricated operation and featuring RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
This Festo industrial component (Part Number 8116763) is a single-acting, open-mode pneumatic gripper featuring 2 parallel gripper jaws with a size 10 designation and a 2 mm stroke per jaw. Engineered with a ball guide and lever structural design for side mounting of gripper fingers, it delivers a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and an operating pressure range of 0.35 MPa to 0.8 MPa. The unit accommodates position sensing via proximity sensors and excludes specific copper, zinc, and nickel constituents by mass outside of permitted exceptions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8112957 is an L-shaped industrial component featuring an 11.5 mm nominal width, an external thread R3/8 pneumatic connection 1, and a connection for a 16 mm outside diameter pneumatic tubing on connection 2. This standard-sized push-pull design operates within a pressure range of -0.095 MPa to 0.8 MPa across an ambient temperature range of -5 °C to 60 °C, utilizing compressed air according to ISO 8573-1:2010 [7:4:4] with coated screwed plugs and an external hexagon SW20 mounting type. Each pack size contains 5 units weighing 40.97 g each, conforming to VDMA24364 Zone III LABS and ISO 14644-1 Class 4 cleanroom requirements with a corrosion resistance class of 1. Submit your exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8118320 is an electrical industrial component weighing 580 g with any mounting position and a 100% duty cycle, featuring Class H insulation and dual-voltage coil characteristics of 110 V AC at 50/60 Hz (12.0 VA) and 110 V DC (12.0 W) with -15% / +10% permissible voltage fluctuations. It incorporates a terminal box with an M20x1.5 cable entry thread, provides IP66 protection, complies with VDMA24364 Zone III LABS (PWIS) and RoHS standards, and carries Korean explosion protection certifications for EPL Gb and Db in Gas Zone 1 and Dust Zone 21 under ignition protection types Ex e mb IIC T4 and Ex tD A21 IP66 T120°C for ambient temperatures from -25°C to +40°C, backed by certificate numbers 22-AV4BO-0256X and 22-AV4BO-0257X. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113217 is a straight industrial component featuring a push-pull structural design with a 6 mm nominal width and a standard size. This pack of 10 components accommodates a 12 mm push-in sleeve at connection 1 and an 8 meu... oh wait, an 8 mm push-in sleeve at connection 2, incorporating a blue releasing ring made of POM and a PBT housing. It operates within a pressure range of -0.095 MPa to 0.8 MPa using compressed air per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo size 10 pneumatic parallel gripper features a single-acting, open mode of operation with two gripper jaws and a stroke of 2 mm per jaw. It utilizes a ball guide with zero gripper jaw backlash Sz, zero angular play, a 0.2 mm rotational symmetry, and a repetition accuracy of 0.02 mm, operating within a pressure range of 0.35 MPa to 0.8 MPa. This component includes a gripping force backup on opening, position sensing for proximity sensors, and a maximum operating frequency of 3 Hz with a minimum opening time of 28 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8118319, features electrical actuation and is operable in any mounting position with a 100% duty cycle and Class H insulation. The unit is rated for 230 V AC at 50/60 Hz with 12.0 VA power, 230 V DC at 12.0 W, and permissible voltage fluctuations of -15% / +10%. Certified for explosion protection with EPL Db and Gb ratings for Zone 1 and Zone 21, it incorporates Ex e mb IIC T4 gas and Ex tD A21 IP66 T120°C dust ignition protection across an explosive ambient temperature range of -25°C to +40°C. The 580 g assembly includes an M20x1.5 terminal box electrical connection, an IP66 degree of protection, and VDMA24364 Zone III LABS conformity with RoHS-compliant materials. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8112956 is an L-shaped industrial component featuring an R3/8 external thread for pneumatic connection 1 and a push-pull structural design for 14 mm outside diameter pneumatic tubing on connection 2, supplied in a pack size of 5. This standard-sized component operates across a temperature range of -5 °C to 60 °C and handles compressed air according to ISO 8573-1:2010 [7:4:4] within an operating pressure range of -0.095 MPa to 0.8 MPa. Designed with an external hexagon SW20 for mounting and a blue releasing ring, it has a product weight of 41.23 g and conforms to CRC 1 low corrosion stress. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8113216 is a standard straight industrial component featuring a 7.5 mm nominal width and dual Ø 10 mm push-in sleeve pneumatic connections utilizing a push-pull principle. Constructed with a PBT housing, POM releasing ring in blue, and supporting any mounting position, this part operates within a pressure range of -0.095 MPa to 0.8 MPa and temperatures from -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. It offers Class 1 corrosion resistance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and weighs 1.8 g with RoHS compliance in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →