Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
Engineered with a 2/2-way closed monostable valve function, this Festo industrial component part number 8114038 features a 0.8 mm nominal width, a 10 µl fluid chamber valve internal volume, and a soft sealing principle operating at a 100% duty cycle on 24 V DC nominal voltage. The directly controlled unit achieves a minimum dosing volume of 1 µl through a 0.3 mm wide and 30 mm long dosing needle, delivering a typical dosing precision of ≤5% Tip-to-Tip CV and ≤3% Intra-run CV within an operating pressure range of -0.02 MPa to 0.065 MPa. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo part number 8112975 is a standard straight industrial component featuring a 4 mm nominal width, an external G1/4 pneumatic connection 1, and a pneumatic connection 2 for 6 mm outside diameter tubing. This push-pull design incorporates a sealing ring on the screwed plug, an internal hexagon AF 4 mounting type with a 9 Nm nominal tightening torque at a ±20% tolerance, and an operating pressure range of -0.095 MPa to 0.8 MPa for compressed air as per ISO 8573-1:2010 [7:4:4]. Constructed with a CRC of 1 and a product weight of 12.8 g, the unit supports lubricated operation across an ambient temperature of -5 °C to 60 °C while meeting VDMA24364 Zone III LABS conformity and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8118345 is an electrical 3/2-way closed monostable on/off industrial component featuring a mechanical spring reset, non-detenting manual override, and non-reversible flow direction. Operating within a pressure range of -0.09 MPa to 0.8 MPa (-0.9 bar to 8 bar, -13.05 psi to 116 psi), this IP66-rated unit operates on a 24 V DC 3.0 W coil with class H insulation, a 100% duty cycle, and permissible frequency fluctuations of +/- 10%. It holds ATEX category II 2G and II 2D certifications along with international EPL Gb and EPL Db explosion protection ratings for hazardous environments with ambient temperatures from -65°C to +55°C. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo part number 8116776 is a double-acting pneumatic industrial component featuring a parallel 2-jaw gripper function with a size 10 rating and a 4 mm stroke per gripper jaw. Operating at a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi), this lever-type unit utilizes a ball guide and achieves a repetition accuracy of 0.02 mm with zero angular play and zero backlash. It supports any mounting position, a maximum operating frequency of 3 Hz, position sensing via proximity switch, and a minimum opening time of 15 ms at 6 bar. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 8114037 is a direct-controlled industrial component featuring a 2/2-way closed, monostable valve function with a soft sealing principle and a 0.8 mm nominal width. Operating within a pressure range of 0 to 0.1 MPa (0 to 1 bar), this unit incorporates a 0.3 mm dosing needle with a length of 30 mm, achieving a minimum dosing volume of 1 µl with an intra-run CV of ≤ 3% and tip-to-tip CV of ≤ 5%. The assembly provides an internal volume of 10 µl for the fluid chamber valve and 178 µl for the distributor block, operating at a maximum switching frequency of 4 Hz with a 7 ms switching-on time. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 8112974, features a straight design with a standard size, a 5 mm nominal width, and a G1/8 external thread connecting to a 10 mm outside diameter pneumatic tubing via a push-pull structural design. Operating within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, or -13.775 psi to 116 psi) and temperatures from -5 °C to 60 °C, the unit utilizes a sealing ring on the screwed plug and accommodates compressed air as per ISO 8573-1:2010 [7:4:4] with lubricated operation possible. Built with an internal hexagon AF 5 mounting type requiring a nominal tightening torque of 7 Nm with a ±20% tolerance, the 17.5 g component has a CRC rating of 1, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 8118344 is a 3/2-way closed, monostable electrical on/off valve featuring a mechanical spring reset and non-reversible flow direction. Rated for an operating pressure range of -0.09 MPa to 0.8 MPa, this IP66-protected component includes a detenting manual override, a 230 V AC coil with Class H insulation, and 100% duty cycle operation for compressed air media per ISO 8573-1:2010 [7:4:4]. Certified for explosive atmospheres with Ex db IIC and Ex tb IIIC protections, it exhibits a CRC 2 moderate corrosion stress rating and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo size 10 pneumatic parallel gripper features a double-acting mode of operation across two jaws with a 4 mm stroke per jaw, ball guide construction, and positively driven motion sequence. This component operates at pressures from 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi) with a maximum operating frequency of 3 Hz and a minimum opening time of 15 ms at 6 bar. Position sensing is achieved via proximity switch, offering a repetition accuracy of 0.02 mm, 0 mm gripper jaw backlash Sz, 0 deg angular play ax and ay, and 0.2 mm rotational symmetry and interchangeability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8112973 is a straight industrial component featuring a G1/8 external thread for pneumatic connection 1 and an 8 mm outside diameter connection for pneumatic tubing 2, packaged in a quantity of 10. Built with a 5 mm nominal width utilizing the push-pull structural design and a sealing ring on the screwed plug, it operates at pressures from -0.95 bar to 8 bar within an ambient temperature range of -5 °C to 60 °C. This unit offers ISO 14644-1 Class 4 cleanroom suitability, VDMA24364 Zone III LABS conformity, and CRC 1 low corrosion stress while supporting lubricated compressed air per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8113317, features an angled 90-degree socket connection on both the field device and control sides utilizing connection pattern F1 with 31 occupied pins and wires. Designed with a square design, snap-locking mounting, and without a label holder, the unit has a contact durability rating of 30 and weighs 11 g. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this item.
View product details →
Festo
The Festo 8118343 is an electrical 3/2-way closed monostable on/off valve featuring a mechanical spring reset and non-reversible flow direction for operating pressures ranging from -0.09 MPa to 0.8 MPa. Rated to IP66 with Ex db IIC T6...T3 Gb gas and Ex tb IIIC T85°C Db dust ignition protection, this component operates on 110 V AC at 50/60 Hz with a 100% duty cycle, Class H insulation, and a detenting manual override. It accommodates compressed air as per ISO 8573-1:2010 [7:4:4] with oil lubrication capability, and exhibits a moderate corrosion resistance class of CRC 2 along with VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a formal quote for this item.
View product details →
Festo
The Festo 8112972 is a mini straight industrial component featuring a G1/8 external thread and a push-pull connection for 6 mm outside diameter pneumatic tubing, supplied in a pack size of 10 with a product weight of 7.2 g each. Operating within a pressure range of -0.095 MPa to 0.8 MPa and temperatures from -5 °C to 60 °C, this component utilizes a sealing ring on the screwed plug, has an internal hexagon AF 4 mounting type, and accommodates compressed air per ISO 8573-1:2010 [7:4:4] with lubricated operation capability. It meets CRC 1 corrosion resistance, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8118342 is an electrical 3/2-way closed monostable on/off valve featuring a mechanical spring reset and non-reversible flow direction. Built for hazardous areas, this component carries Ex db IIC T6...T3 Gb gas ignition protection and Ex tb IIIC T85°C Db dust protection with an IP66 rating, operating on compressed air from -0.09 MPa to 0.8 MPa with a 24 V DC, 3.0 W coil at 100% duty cycle. It features Class H insulation, detenting manual override, and moderate corrosion resistance, functioning within explosive ambient temperatures ranging from -65°C to +60°C depending on the temperature class. Submit the exact part number, quantity, and application requirements for an RFQ.
View product details →
Festo
The Festo size 10 pneumatic parallel gripper features a double-acting mode of operation with two gripper jaws driven through a positively driven motion sequence and a ball guide. It delivers a 4 mm stroke per jaw, a 0.02 mm repetition accuracy, and operates within a pressure range of 0.2 MPa to 0.8 MPa at a maximum frequency of 3 Hz. Position sensing is accomplished via proximity switch, and the unit supports any mounting position with a minimum opening time of 15 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 8113310, features a square, 90-degree angled plug connection with 31 pins and wires on the field device side, utilizing a snap-locking mount and conforming to DIN 47100. The control side features an open-end cable connection with 14 pins and wires, operating within a DC voltage range of 0 V to 50 V and a nominal DC voltage of 24 V. Weighing 2960 g, the unit includes 30 contact durability and lacks a label holder. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8112971 is a mini straight industrial component featuring a 3 mm nominal width, a G1/8 external thread for pneumatic connection 1, and a push-pull structural design for 4 mm outside diameter pneumatic tubing. Rated for an operating pressure of -0.95 bar to 8 bar across an ambient temperature range of -5 °C to 60 °C, this part utilizes a sealing ring on the screwed plug and an internal hexagon AF 3 mounting type with a nominal tightening torque of 7 Nm. Each pack size contains 10 units, weighing 6.5 g each, and is compatible with compressed air meeting ISO 8573-1:2010 [7:4:4] standards with lubricated operation possible. Submit part number 8112971, required quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8118341 is an electrical 3/2-way closed monostable industrial component featuring a mechanical spring reset and a non-reversible flow direction. Designed with an IP65 degree of protection, a detenting manual override, and a 100% duty cycle, this on/off valve operates within a pressure range of -0.09 MPa to 0.8 MPa (-0.9 bar to 8 bar / -13.05 psi to 116 psi). Certified under authorities 21-GA4BO-0070X and 21-GA4BO-0071X, it provides ignition protection for gas (Ex ia IIC T6...T5 Gb) and dust (Ex ia IIIC T135°C Db) across explosive ambient temperatures of -40°C to 50°C/65°C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 8116773 is a size 10 double-acting pneumatic parallel gripper featuring two jaws with a stroke of 4 mm per jaw, a ball guide, and a positively driven lever motion sequence with lateral connection directions. This component operates at a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar / 29 psi to 116 psi) with a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and a minimum opening time of 15 ms at 6 bar. Position sensing is accomplished via a proximity switch, while structural variants exclude metals with copper, zinc, or nickel as the main constituent by mass with specific allowed exceptions. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
This Festo industrial component, part number 8113309, features a square, 31-pin angled plug on the field device side with a snap-locking mounting type and connection pattern F1, conforming to standard DIN 47100. The control side utilizes a cable with 28 open-end wires, supporting a DC operating voltage range of 0 V to 50 V with a nominal operating voltage of 24 V. Weighing 2960 g, this cable assembly is designated without a label holder and provides 30 contact durability cycles. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
The Festo 8112970 is a mini straight industrial component featuring a 4 mm nominal width, an M7 external thread pneumatic connection 1, and a connection 2 for 6 mm outside diameter pneumatic tubing utilizing the push-pull structural design. This part operates across a temperature range of -5 °C to 60 °C with an operating pressure from -0.095 MPa to 0.8 MPa utilizing compressed air per ISO 8573-1:2010 [7:4:4], and includes a sealing ring on the screwed plug with a nominal tightening torque of 2 Nm at a ±5% tolerance. Each pack size contains 10 units, with each product weighing 4.3 g and featuring an internal hexagon AF 4 type of mounting alongside a corrosion resistance class 1. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →