Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8117062 is a block-design industrial component utilizing a magneto-resistive measuring principle to measure position within an ambient temperature range of -4 °F to 176 °F. Featuring a RoHS-compliant build, this unit includes a PNP switching output with an N.O. contact, a 4 µs on time, a max output current of 500 mA, a max DC switching capacity of 12 W, a 1 V voltage drop, and a DC operating voltage range of 6 V to 24 V with integrated short-circuit and reverse polarity protection. Electrical connection is achieved via a 3-pin open-end PVC cable with a longitudinal orientation and gray sheath. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo Motion App GAMM-A33 is an industrial component featuring a response sensitivity of 10 mm and a typical positioning accuracy of ±1.5 mm. Its maximum overshoot in relation to the setpoint position is specified at ±2.5 mm. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
This Festo industrial component, part number 8113119, is a straight-design fitting featuring a standard size with a 13 mm nominal width and a push-pull structural design for 14 mm outside diameter pneumatic tubing on both connections. Built with a PBT housing, a blue POM releasing ring, and a weight of 19.88 g, it operates within a pressure range of -0.95 bar to 8 bar and temperatures from -5 °C to 60 °C using compressed air conforming to ISO 8573-1:2010 [7:4:4]. The part offers RoHS compliance, VDMA24364 Zone III LABS conformity, ISO 14644-1 Class 4 cleanroom suitability, and CRC 1 low corrosion stress resistance, with any mounting position and lubricated operation supported. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 8111595 is an externally controlled industrial component featuring a 2/2 poppet valve design with a piston actuator and mechanical spring reset. It enables non-reversible, under-valve-seat flow for gaseous and liquid media including vapor, water, neutral liquids, mineral oil, hydraulic fluid based on mineral oil, inert gas, and filtered compressed air with a 200 µm filter mesh. Operating within a medium pressure range of 0 bar to 13.5 bar and temperatures from -10 °C to 180 °C, this unit provides a Kv flow rate of 24.4 m³/h and supports in-line installation in any mounting position for weather-protected exterior locations. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo SBOA-K30E-M12S (542139) is an official Festo cable identified by GTIN 4052568179915. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
The Festo part number 8115892 is an industrial component featuring a square field device side socket with a straight cable outlet, connection pattern Q7, and 2 occupied pins out of 2 total pins. The control side utilizes a twin cable with 2 open-ended wires, operating within a DC voltage range of 0 V to 30 V and a current rating of 0.3 A at 40° C. This 0.5 g unit includes 20 contact durability cycles, a surge resistance of 1.2 kV, no reverse polarity protection, and is supplied without a label holder via inserted mounting. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 8113118 is a straight industrial component featuring a push-pull structural design with a nominal width of 10 mm and a standard size, supplied in a pack size of 5. This component accommodates pneumatic connection 1 for 14 mm outside diameter tubing and pneumatic connection 2 for 12 mm outside diameter tubing, utilizing a PBT housing and a blue POM releasing ring. It operates within a pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar | -13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] across ambient temperatures from -5 °C to 60 °C, supporting lubricated operation and meeting VDMA24364 Zone III LABS conformity with a class 4 ISO 14644-1 cleanroom rating. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8117060 Seal-SET DADG-SK-C7-4" is a size 4" industrial component adhering to VDMA24364 Zone III LABS (PWIS) conformity and featuring RoHS compliant materials. This assembly operates within an ambient temperature range of 23 °F to 165 °F as documented in the official Festo EN-US data sheet. Request a formal quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
This Festo 8111594 industrial component is an externally controlled 2/2 poppet valve featuring a piston actuator and a non-reversible flow direction under the valve seat for gaseous and liquid media. The unit accommodates a medium pressure range of 0 MPa to 0.44 MPa, an operating pressure of 0.5 MPa to 0.7 MPa, and a maximum viscosity of 600 mm²/s across medium temperatures from -10 °C to 180 °C. Configured for in-line installation in any mounting position, it utilizes a G1 1/4 threaded sleeve cable connection per DIN ISO 228 and a G1/8 internal thread pneumatic connection. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
Engineered with a nominal length of 32 mm and a size 30 designation, this Festo industrial component features a holder diameter of 8 mm on one end and 12 mm on the other, supporting any mounting position. The assembly accommodates a maximum rotational speed of 8,000 rpm, a transferable torque of 12.5 Nm, and a mass moment of inertia of 5.87 kgmm² at a product weight of 48 g. Operating and storage temperatures range from -25 °C to 60 °C within a 0 to 95% relative air humidity range, while meeting VDMA24364-B2-L LABS conformity and RoHS material requirements. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo seal-SET DADG-SK-C7-3 1/4" is an industrial component featuring a size of 3 1/4" and VDMA24364 Zone III LABS conformity. This RoHS compliant assembly operates within an ambient temperature range of 23 °F to 165 °F. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 8113117, features a straight design with a standard size, a 9.3 mm nominal width, and a push-pull structural design configured for 14 mm to 10 mm pneumatic tubing outside diameters. The PBT housing and POM releasing ring support an operating pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) for compressed air media according to ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Delivered in a pack size of five with a product weight of 18.22 g each, the unit offers any mounting position, Class 4 cleanroom suitability per ISO 14644-1, and VDMA24364 Zone III LABS conformity with RoHS compliance. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo CRDSNU-B-16-25-P-A-MG-A1 (8073760) is an ISO cylinder manufactured by Festo, identified by GTIN 4052568298005. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this industrial component.
View product details →
Festo
The Festo 8111593 is an externally controlled 2/2 poppet valve featuring a piston actuator and a mechanical spring reset method for non-reversible under-seat flow of gaseous and liquid media up to 2.3 MPa. This in-line mountable component operates with a medium temperature range of -10 °C to 180 °C, an ambient temperature range of 0 °C to 60 °C, and a flow rate Kv of 17.2 m³/h across various media including vapor, water, mineral oil, and inert gas. Designed with a G1 threaded sleeve cable connection and G1/8 internal thread pneumatic connection, it requires an operating pressure between 5 bar and 7 bar. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8115398 is an industrial component utilizing a magnetic Hall measuring principle for position sensing in T-slots across a 0 mm to 160 mm range. This device features a PNP switching output with a switchable N/C or N/O contact function, a max switching frequency of 1 kHz, a 0.05 mm displacement resolution, and a 0.1 mm repetition accuracy. Operating within an ambient temperature range of -25 °C to 70 °C, the unit supports a max travel speed of 3 m/s with a 1 ms typical sampling interval, and includes RoHS compliance, halogen-free materials, RCM compliance, c UL us listing, and CE/UKCA EMC markings. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo seal-set DADG-SK-C7-2 1/2" is an industrial component featuring a 2 1/2" size and VDMA24364 Zone III LABS (PWIS) conformity. This RoHS-compliant assembly operates within an ambient temperature range of 23 °F to 165 °F, as specified in the official Festo data sheet. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
Engineered with a straight design and a nominal width of 10 mm, this Festo industrial component (part number 8113116) features a push-pull structural design supporting pneumatic tubing with an outside diameter of 12 mm for both connections. It operates within a pressure range of -0.095 MPa to 0.8 MPa (-13.775 psi to 116 psi) using compressed air as per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. The unit incorporates a PBT housing, a blue POM releasing ring, a VDMA24364 Zone III LABS conformity, and an ISO 14644-1 Class 4 cleanroom suitability rating with a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8111592 is an externally controlled 2/2 poppet valve with a piston actuator designed for in-line installation in any mounting position with a G1 threaded sleeve connection per DIN ISO 228. This pneumatically actuated component operates with a G1/8 internal thread pneumatic connection, utilizing a mechanical spring reset method and compressed air operating medium as per ISO 8573-1:2010 [7:4:4] at an operating pressure range of 0.5 MPa to 0.7 MPa. It provides non-reversible flow under the valve seat for gaseous and liquid media—including vapor, mineral oil, water, and neutral liquids—with a medium pressure range of 0 MPa to 0.83 MPa, a maximum viscosity of 600 mm²/s, and a Kv flow rate of 15.9 m³/h across a medium temperature range of -10 °C to 180 °C. Submit the exact part number, quantity, and application requirements to request a quote for this industrial component.
View product details →
Festo
The Festo Seal-SET DADG-SK-C7-2" is an industrial component featuring a 2" size and RoHS compliant materials. This assembly conforms to VDMA24364 Zone III LABS (PWIS) standards and operates within an ambient temperature range of 23 °F to 165 °F. Submit the exact part number, quantity, and application requirements to request a quote for this specification.
View product details →
Festo
The Festo 8113115 is a straight industrial component featuring a 9.3 mm nominal width and a push-pull structural design for 12 mm and 10 mm outside diameter pneumatic tubing. Constructed with a PBT housing, POM releasing ring, and a blue releasing ring, this standard-sized part operates within a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C using compressed air per ISO 8573-1:2010 [7:4:4]. It offers VDMA24364 Zone III LABS conformity, Class 4 cleanroom suitability per ISO 14644-14, and CRC 1 low corrosion stress resistance while supporting lubricated operation and RoHS compliance. Submit part number 8113115, pack quantity, and application requirements to request a formal quote.
View product details →