Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 8080984 is a 20 mm wide piston gate valve featuring a 5/3-way closed valve function, direct control, and a soft sealing principle. This manually actuated component delivers a normal nominal flow rate of 700 l/min through G1/8 pneumatic working ports across an operating pressure range of -0.95 bar to 10 bar. Designed with a mechanical spring reset, adjustable exhaust air function, and positive overlap lap, it supports a maximum switching frequency of 0.5 Hz in ATEX Zone 1, 2, 21, and 22 hazardous environments. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8085147 is a double-acting industrial drive unit featuring a 20 mm piston diameter, a 150 mm stroke, and a yoke structural design incorporating a double piston, piston rod, and slide. Operating on compressed air within a pressure range of 1 bar to 8 bar (14.5 psi to 116 psi) and up to 0.8 m/s max speed, this component utilizes elastic cushioning rings at both ends and a ball bearing cage guide for motion control. It offers position sensing via proximity switch, an adjustable end-position range of 32.9 mm at the front and 31.1 mm at the rear, a repetition accuracy of 0.3 mm or less, and functions in ambient temperatures from -10 °C to 60 °C with ISO Class 6 cleanroom suitability. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8083470 is an electromechanical linear axis featuring an integrated ball screw actuator, a size 45 footprint, a 100 mm working stroke, and a 10 mm spindle pitch with a 10 mm screw diameter. Operating with a 100% duty cycle, it achieves a maximum speed of 0.25 m/s, a maximum acceleration of 5 m/s², and a repetition accuracy of ±0.015 mm supported by a recirculating ball bearing guide and insulation protection class B. Position sensing is accomplished via a motor encoder, proximity switches, and an absolute single-turn magnetic rotor position sensor, complemented by an integrated CMOS temperature sensor for thermal shutdown, an LED user interface display, and configurable digital logic outputs. Submit the exact part number, quantity, and application requirements to receive an official quote for this component.
View product details →
Festo
The Festo 8078264 industrial component is a connecting cable weighing 49 g, designed to link field devices such as sensors and actuators to controllers. Certified by c UL us - Listed (OL) under UL E253748, it conforms to EN 61076-2-104 and EN 61984 standards while meeting IEC 61010-1 and 61010-2-202 application requirements for Festo electrically operated valves. Featuring a straight 3-pin A-coded 8 mm socket with snap-locking on the field device side and a cable connection on the control side, this part provides 100 contact durability cycles for energy-limited circuits up to 4 A at 30 VDC. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8080983 is a 20 mm wide piston gate valve featuring a 5/3-way closed valve function, direct manual actuation with a mechanical spring reset, and a soft sealing principle. Operating within a pressure range of -0.95 bar to 10 bar, this reversible component achieves a normal nominal flow rate of 1200 l/min through G1/4 pneumatic working ports and includes an adjustable exhaust air function. Certified for ATEX Zone 1, 2, 21, and 22 explosion prevention, this unit operates with ISO 8573-1:2010 compressed air and permits oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8085146 is a double-acting industrial component featuring a 20 mm piston diameter, 125 mm stroke, and a yoke drive unit with a ball bearing cage guide. It operates with compressed air within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi) at a maximum speed of 0.8 m/s, utilizing elastic cushioning rings at both ends and position sensing via proximity switch. This unit has an adjustable end-position range of 32.9 mm at the front and 31.1 mm at the rear, a repetition accuracy of 0.3 mm or less, and functions in any mounting position within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this component.
View product details →
Festo
The Festo part number 8083433 is an electromechanical linear axis featuring an integrated actuator, ball screw, and recirculating ball bearing guide supporting a size 32 profile, an 8 mm screw diameter, and an 8 mm/U spindle pitch with any mounting position. This unit provides a working stroke from 100 mm to 800 mm, a repetition accuracy of ±0.015 mm, a max speed of 0.18 m/s, and a max acceleration ranging from 3 m/s² to 5 m/s² at a 100% duty cycle. Operational monitoring is handled by a magnetic absolute single-turn encoder for rotor position sensing, motor encoder and proximity switch position sensing, an integrated CMOS temperature sensor for over-temperature shutdown, and LED display diagnostics with configurable digital logic outputs. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8080982 is a 20 mm wide industrial component featuring a 5/3 exhausted piston gate valve design with a direct, detenting manual actuation type intended strictly for hand operation. This reversible valve delivers a normal nominal flow rate of 530 l/min through 1/8 NPT pneumatic working ports, operating across a pressure range of -0.95 bar to 10 bar with an adjustable exhaust air function and soft sealing principle. Certified for ATEX Zone 1, 2, 21, and 22 explosion prevention and protection, the unit operates on compressed air meeting ISO 8573-1:2010 [7:-:-] standards with optional oil lubrication. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 8085145 is a double-acting industrial component featuring a 20 mm piston diameter, a 100 mm stroke, and a yoke drive unit operating mode with a double piston, piston rod, slide, and ball bearing cage guide. It operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, 14.5 psi to 116 psi) utilizing compressed air as per ISO 8573-1:2010 [7:4:4] at a maximum speed of 0.8 m/s, featuring elastic cushioning rings or pads at both ends, a repetition accuracy of <= 0.3 mm, position sensing via proximity switch, and an adjustable end-position range of 32.9 mm at the front and 31.1 mm at the rear. Built with an ambient temperature range of -10 °C to 60 °C, a low corrosion stress CRC rating of 1, VDMA24364-B1/B2-L LABS conformity, and ISO 14644-1 Class 6 cleanroom suitability, this unit supports any mounting position and permits operation with oil lubrication. Submit part number 8085145, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8078263 is an industrial connecting cable weighing 96 g that links field devices such as sensors and actuators to controllers, conforming to EN 61076-2-104 and EN 61984 standards with c UL us-Listed (OL) certification under UL E253748. It features an angled M8x1 A-coded 3-pin socket on the field device side with a green status indicator LED and a yellow switching status LED for NPN N/O contacts, alongside a cable connection on the control side and a contact durability rating of 100. This component meets IEC 61010-1 and 61010-2-202 requirements for electrically operated Festo valves, restricting supply to energy-limited circuits with a maximum current of 4 A at a maximum open circuit voltage of 30 VDC. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 8083430 is an electromechanical linear axis featuring an integrated actuator, ball screw, and recirculating ball bearing guide with a size 32 designation and an 800 mm working stroke. Operating at a 100% duty cycle, it delivers an 8 mm screw diameter, an 8 mm/U spindle pitch, a maximum speed of 0.18 m/s, a maximum acceleration of 5 m/s², and a repetition accuracy of ±0.015 mm in any mounting position. The unit includes absolute single-turn magnetic rotor position sensing, configurable digital logic outputs, an LED display, user interface, integrated end-position sensing, and over-temperature shutdown via an integrated CMOS temperature sensor with analog output. Submit the exact part number, quantity, and application requirements to request a formal quotation.
View product details →
Festo
The Festo 8080981 is a 20 mm wide manual 5/3 exhausted piston gate valve featuring a soft sealing principle, 7 mm nominal width, and a normal nominal flow rate of 750 l/min with reversible flow direction. This direct-controlled component operates within a pressure range of -0.095 MPa to 1 MPa using compressed air per ISO 8573-1:2010 [7:-:-], accommodates oil lubrication, and includes ATEX certification for Zones 1, 2, 21, and 22. Designed with detenting manual override for hand-only operation and adjustable exhaust air function, it supports any mounting position and a maximum switching frequency of 0.5 Hz. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 8085144 is a double-acting industrial component featuring a 20 mm piston diameter, an 80 mm stroke, and a yoke drive unit with a piston rod and slide structural design. It incorporates elastic cushioning rings at both ends, a ball bearing cage guide, and position sensing via proximity switch, operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi) and a maximum speed of 0.8 m/s. Designed for any mounting position with a repetition accuracy of 0.3 mm or less, it functions using compressed air per ISO 8573-1:2010 [7:4:4] within an ambient temperature range of -10 °C to 60 °C. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
Manufactured by Festo, part number 8078262 is an industrial connecting cable weighing 50 g that links field devices such as sensors and actuators to controllers. This component features an angled M8x1 A-coded 3-pin socket on the field device side with a green status LED and a yellow NPN N/O switching status LED, alongside a cable connection on the control side. It conforms to EN 61076-2-104 and EN 61984 standards, carries c UL us - Listed (OL) certification via UL E253748, and meets IEC 61010-1 and 61010-2-202 requirements for Festo electrically operated valves utilizing energy-limited circuits up to 4 A and 30 VDC. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 8083429 is an electromechanical linear axis featuring an integrated actuator, a ball screw mechanism with an 8 mm screw diameter and an 8 mm/U spindle pitch, and a recirculating ball bearing guide supporting a working stroke of 600 mm in any mounting position. This Size 32 unit achieves a maximum speed of 0.18 m/s, a maximum acceleration of 5 m/s², and a repetition accuracy of ±0.015 mm during a 100% duty cycle, incorporating an absolute single-turn magnetic rotor position sensor, configurable digital logic outputs, LED display, and thermal shutdown via an integrated CMOS temperature sensor with insulation protection class B. Submit part number 8083429, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8080980 is a 20 mm wide manual industrial component featuring a 5/3 exhausted valve function with a piston gate valve structural design and soft sealing principle. This directly controlled unit delivers a normal nominal flow rate of 530 l/min through G1/8 pneumatic working ports across an operating pressure range of -0.95 bar to 10 bar. It includes adjustable exhaust air function, reversible flow direction, positive overlap, detenting manual override, and ATEX certification for zones 1, 2, 21, and 22, requiring manual-only operation with compressed air per ISO 8573-1:2010 [7:-:-] where oil lubrication is possible and required for continued use. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo industrial component, part number 8076389, features a width dimension of 18 mm and a structural design with a connection direction underneath. Built with a wrought aluminum alloy manifold rail and a RoHS-compliant material composition, it supports a maximum of 6 valve positions and offers a corrosion resistance class of CRC 2 for moderate corrosion stress. Weighing 270 g, this unit includes pneumatic connection 1 as G1/8, pneumatic connection 2 as M5, VDMA24364-B2-L LABS conformity, and requires a maximum tightening torque of 0.6 Nm for valve mounting. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 8078261 is an industrial connecting cable designed to interface field sensors and actuators with controllers. This 96 g assembly features an angled M8x1 A-coded 3-pin socket with a screw-type lock on the field device side and a cable connection on the control side, complete with a green status LED and a yellow PNP N/O switching status indicator. Built to EN 61076-2-104 and EN 61984 standards and c UL us-listed under UL E253748, it supports energy-limited circuits up to 4 A and 30 VDC for electrically operated Festo valves per IEC 61010-1 and 61010-2-202. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8080979 is a 20 mm wide piston gate industrial component featuring a 5/3 exhausted valve function, a normal nominal flow rate of 750 l/min, and G1/4 pneumatic working ports. Operating across a pressure range of -0.95 bar to 10 bar, this directly controlled unit utilizes a soft sealing principle, reversible flow direction, and adjustable exhaust air function with detenting manual override. It supports compressed air as per ISO 8573-1:2010 [7:-:-], allows oil lubrication, and carries ATEX certification for zones 1, 2, 21, and 22 for restricted manual-only operation. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 8083428 is an electromechanical linear axis featuring an integrated actuator, a ball screw with an 8 mm screw diameter and an 8 mm/U spindle pitch, and a recirculating ball bearing guide supporting a 500 mm working stroke without stroke reserve. Designed for any mounting position, it achieves a maximum speed of 0.18 m/s, a maximum acceleration of 5 m/s², a repetition accuracy of ±0.015 mm, and operates at a 100% duty cycle within insulation protection class B. Position sensing utilizes a motor encoder, proximity switches, and an absolute single-turn magnetic rotor position sensor, while thermal management includes over-temperature shutdown via an integrated precise CMOS temperature sensor with an analogue output. Additional features comprise configurable, non-galvanically isolated digital logic outputs, integrated end-position sensing, an LED display, and a user interface. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →