Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 560709 is a 12 mm wide industrial component featuring an electrical actuation type and a piloted, 3/2-way closed monostable valve function with a piston gate valve structural design. Operating at 24V DC within an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi), this unit delivers a normal nominal flow rate of 180 l/min through a sub-base pneumatic working port utilizing a soft sealing principle and a pneumatic spring reset method. Additional attributes include a nominal width of 2.1 mm, an adjustable exhaust air function, positive overlap lap, non-reversible flow direction, non-detenting manual override, IP40 degree of protection, any mounting position, an on switching time of 12 ms, and an off switching time of 10 ms. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
The Festo 561962 is a single-acting rack and pinion industrial component featuring an actuator size of 77, an F12 flange hole pattern, and a 90-degree swivel angle designed for compressed air operation in accordance with ISO 8573-1:2010 [7:4:4]. Operating within a pressure range of 2 to 10 bar without cushioning or position detection, this unit incorporates an ISO 5211 fitting connection, a VDI/VDE 3845 NAMUR valve connection, a corrosion resistance classification of CRC 3, and ATEX certification for hazardous environments under category II 2G and II 2D. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 560231 is a double-acting pneumatic parallel gripper featuring two jaws with an 8 mm stroke per jaw and an operating pressure range of 3 bar to 8 bar. This size 63 component utilizes an inclined plane structural design with a positively driven motion sequence, offering a repetition accuracy of 0.05 mm, a maximum interchangeability of 0.2 mm, and position sensing via proximity switch. It supports an operating pressure for sealing air between 0 bar and 0.5 bar, a maximum operating frequency of 2 Hz, a minimum opening time of 143 ms at 6 bar, and a minimum closing time of 152 ms at 6 bar in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 561293 is an industrial component featuring a size 25 designation with a nominal length of 22 mm, a 6.35 mm diameter for holder 1, and a 10 mm diameter for holder 2. This RoHS-compliant unit weighs 43.7 g, offers a transferable torque of 3.6 Nm, a mass moment of inertia of 3.2 kgmm², and a maximum rotational speed of 8000 rpm for mounting in any position. Operating and storage temperatures span from -25 °C to 60 °C with relative air humidity between 0 and 95%, while maintaining VDMA24364-B2-L LABS conformity. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 561961 is a single-acting industrial component featuring a rack and pinion design structure with a size 77 actuator and a 90-degree swivel angle. Operating at a working pressure range of 2 to 10 bar, this unit utilizes compressed air in accordance with ISO 8573-1:2010 [7:4:4] and includes an F10 flange hole pattern and VDI/VDE 3845 NAMUR valve connection conforming to ISO 5211. It carries ATEX certifications for II 2G c T6 gas and II 2D c 60°C dust environments across an explosion-proof ambient temperature range of -20°C to +60°C, alongside a corrosion resistance classification CRC of 3. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 560708 is a 25 mm wide 5/2-way monostable industrial component featuring an electrical actuation type and a piston gate valve structural design. Operating at 24V DC within an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi), this piloted valve delivers a normal nominal flow rate of 180 l/min with a soft sealing principle and positive overlap. It incorporates a pneumatic spring reset method, non-detenting manual override, adjustable exhaust air function, IP40 protection, and offers a nominal width of 2.1 mm with an on switching time of 15 ms and off switching time of 18 ms. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →
Festo
The Festo 561292 is an industrial component featuring a size 16 design with a nominal length of 15 mm, a 6.35 mm diameter for holder 1, and an 8 mm diameter for holder 2. This RoHS-compliant unit weighs 12.8 g, exhibits a mass moment of inertia of 0.355 kgmm², and accommodates a transferable torque of 1.6 Nm alongside a maximum rotational speed of 10000 rpm in any mounting position. It conforms to VDMA24364-B2-L LABS (PWIS) standards and operates within an ambient and storage temperature range of -25 °C to 60 °C with relative air humidity from 0 to 95%. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 560230 is a double-acting pneumatic parallel gripper featuring two jaws, a size 63 designation, and a stroke of 16 mm per jaw. Operating at a pressure range of 4 bar to 8 bar with sealing air from 0 bar to 0.5 bar, this component utilizes an inclined plane structural design with a positively driven motion sequence and a gripping force backup during closing. It achieves a repetition accuracy of 0.05 mm, a maximum operating frequency of 2 Hz, and position sensing via a proximity switch in any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 561960 is a single-acting rack and pinion industrial component featuring a size 77 actuator and an ISO 5211 compliant F12 flange hole pattern. It provides a 90-degree swivel angle with an end-position adjustment range of -4 to 8 degrees at 0° and -8 to 4 degrees at 90°, operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a working pressure range of 2 to 10 bar. This un cushioned unit operates in any assembly position without position detection, incorporating a NAMUR VDI/VDE 3845 valve connection and ATEX certification for hazardous environments under category II 2G (c T6) and II 2D (c 60°C) for ambient temperatures from -20°C to +60°C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
This Festo industrial component, part number 561176, features a length of 805 mm, a product weight of 540 g, and a tie rod constructed from high-alloy stainless steel with RoHS compliance. The unit operates within an ambient temperature range of -5 °C to 50 °C, exhibits a maximum tightening torque of 1.7 Nm, achieves a corrosion resistance class of CRC 3 for high corrosion stress, and maintains VDMA24364-B1/B2-L LABS conformity in a pack size of 3. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 560707 is an electrical 5/2-way monostable industrial component featuring a 25 mm width and a piston gate valve structural design with a soft sealing principle. It delivers a normal nominal flow rate of 180 l/min through a sub-base pneumatic working port at an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi) powered by 24V DC operating voltage. Equipped with a pneumatic spring reset method, non-detenting manual override, and adjustable exhaust air function, this piloted component achieves a 15 ms on switching time and an 18 ms off switching time. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 560229 is a size 63 pneumatic parallel gripper utilizing a double-acting actuator system with two gripper jaws and an inclined plane structural design featuring positively driven motion sequence. This component provides a stroke of 16 mm per gripper jaw, an operating pressure range of 4 bar to 8 bar, sealing air operating pressure from 0 bar to 0.5 bar, and a maximum operating frequency of 2 Hz with a repetition accuracy of 0.05 mm. Position sensing is achieved via proximity switch, and the unit supports any mounting position while featuring a gripping force backup on opening. Request a formal quote by submitting your exact part number, required quantity, and application requirements.
View product details →
Festo
The Festo part number 561959 is a single-acting rack and pinion industrial component featuring an actuator size of 77, an F10 flange hole pattern complying with ISO 5211, and a swivel angle of 90 degrees with no cushioning. Operating on compressed air in accordance with ISO 8573-1:2010 [7:4:4] at working pressures between 2 and 10 bar, this unit includes an end-position adjustment range of -4 to 8 degrees at 0 degrees and -8 to 4 degrees at 90 degrees. It features VDI/VDE 3845 NAMUR valve connections, operates in any assembly position without position detection, and holds ATEX category II 2G and II 2D ratings for explosive atmospheres within a -20 degrees Celsius to +60 degrees Celsius ambient temperature range. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
This Festo industrial component, part number 561175, features a length of 765 mm, a product weight of 513 g, and a tie rod made of high-alloy stainless steel. The assembly achieves corrosion resistance class 3 for high corrosion stress, VDMA24364-B1/B2-L LABS conformity, RoHS compliance, and operates within an ambient temperature range of -5 °C to 50 °C with a maximum tightening torque of 1.7 Nm. Each pack contains 3 units. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 560706 is a 12 mm wide electrical industrial component featuring a 3/2-way, monostable, open valve function with a piston gate valve structural design and soft sealing principle. Operating at 24V DC with an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi), this piloted valve delivers a normal nominal flow rate of 180 l/min through a sub-base pneumatic working port and features an adjustable exhaust air function, a pneumatic spring reset method, and IP40 protection. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 561958 is a single-acting rack and pinion industrial component featuring an actuator size of 77, an F12 flange hole pattern, and a 90-degree swivel angle with no cushioning or position detection. Operating on compressed air in accordance with ISO 8573-1:2010 [7:4:4] within a working pressure range of 2 to 10 bar, this unit includes an ISO 5211 fitting connection and a VDI/VDE 3845 NAMUR valve connection. It is rated for ATEX category II 2G gas and II 2D dust environments with an explosion-proof ambient temperature range of -20°C to +60°C, providing end-position adjustment ranges of -4 to 8 degrees at 0° and -8 to 4 degrees at 90° for spring-force opening and closing directions in any assembly position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 560228 is a double-acting pneumatic parallel gripper featuring two jaws with a stroke of 16 mm each and a size rating of 63. This component utilizes an inclined plane structural design with positively driven motion sequence, operating at pressures from 3 bar to 8 bar with sealing air pressure from 0 bar to 0.5 bar. It achieves a repetition accuracy of 0.05 mm, a maximum gripper jaw angular play of 0.1 deg, a maximum backlash of 0.02 mm, and a rotational symmetry of 0.2 mm with maximum interchangeability of 0.2 mm. Position sensing is accomplished via proximity switch, supporting a maximum operating frequency of 2 Hz with minimum opening and closing times of 150 ms and 156 ms respectively at 6 bar. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo part number 561159 is an 18 mm wide electrical industrial component featuring a 2x2/2 closed, monostable valve function and a piston gate valve structural design with a soft sealing principle. It operates at 24V DC within an operating pressure range of -0.09 MPa to 1 MPa, delivering a normal nominal flow rate of 500 l/min through sub-base pneumatic working ports according to ISO 15407-1, VDMA 24563, and G1/8 standards. Certified as c UL us - recognized (OL) and rated to IP65 and NEMA 4 degrees of protection, this piloted unit includes an LED signal status display, adjustable exhaust air, and multiple manual override options. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 560705 is a 12 mm wide, electrically actuated 3/2-way monostable open industrial component featuring a piston gate valve structural design and soft sealing principle. It operates on 24V DC within an operating pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar, 29 psi to 116 psi) and delivers a normal nominal flow rate of 180 l/min through a sub-base pneumatic working port. Equipped with piloted control, a pneumatic spring reset method, adjustable exhaust air function, and non-detenting manual override, this unit achieves a nominal width of 2.1 mm with 12 ms on switching time and 10 ms off switching time. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 561957 is a single-acting rack and pinion industrial component featuring a size 77 actuator, an F10 flange hole pattern, and a 90-degree swivel angle with no cushioning. Operating at a working pressure of 2 to 10 bar on compressed air conforming to ISO 8573-1:2010 [7:4:4], this unit includes an ISO 5211 fitting connection, a VDI/VDE 3845 NAMUR valve connection, and ATEX certification for explosive environments ranging from -20°C to +60°C. Submit part number 561957 with your required quantity and application specifications to request a formal quote.
View product details →