Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Filtration Group
77686314
Filtration Group 77686314 — Filter Element
The Filtration Group 77686314 (FILTERELEMENT 852 362 SMX VST 3 | 368216) is an industrial component featuring a Glasfaser filter element material and a 3 µm filtration rating. This manufacturer model operates with a permissible differential pressure of 210 bar. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116851
Parallel gripper DHPC-25-A-S-2
The Festo size 25 pneumatic industrial component features a double-acting parallel gripper function with two jaws providing a 7 mm stroke per jaw. Engineered with a ball guide and a positively driven motion sequence, this unit delivers a repetition accuracy of 0.02 mm, a max. interchangeability of 0.2 mm, and operates within a pressure range of 1 bar to 8 bar (14.5 psi to 116 psi) at a maximum operating frequency of 3 Hz. Position sensing is accomplished via proximity switch, and the structural design supports any mounting position with a lateral connection direction and flat mounting type for gripper fingers. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8120906
Filter regulator PCRP-44-G14-12-E-R1-M-T18
The Festo part number 8120906 is a size 44 Series P filter regulator featuring a regulating screw with locknut actuator lock and a structural design without a pressure gauge, though it is set up for G1/4 pressure gauges. This component provides primary pressure compensation and secondary exhausting, operating within a pressure regulation range of 0.5 bar to 12 bar and an operating pressure range of 1 bar to 20 bar. It delivers a maximum standard flow rate of 2500 l/min and a normal nominal flow rate of 1750 l/min, utilizing a 40 µm grade of filtration and a manual rotating condensate drain with a 12 cm³ max condensate volume. The housing and bowl conform to NACE MR0175/ISO 15156 standards, and the unit is rated for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 explosion prevention and protection with a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118883
Guided drive DFM-32-30-P-A-GF-F1A
Engineered with a 32 mm piston diameter and a 30 mm stroke, this Festo industrial component utilizes a double-acting yoke drive unit featuring elastic cushioning rings or pads at both ends and a plain-bearing guide. The unit operates on compressed air compliant with ISO 8573-1:2010 [7:4:4] across a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar), achieving a maximum speed of 0.8 m/s while supporting position sensing via proximity switch in any mounting position. Designed with a 50 mm distance from the center of gravity of the payload to the yoke plate, it features LABS conformity according to VDMA24364-B1/B2-L, ISO 14644-1 Class 6 cleanroom suitability, and reduced Cu/Zn/Ni values (F1a) for the production of Li-ion batteries within an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8127358
Retainer CAFM-D4-W
This Festo industrial component, part number 8127358, features dimensions of 216 mm in width, 97 mm in height, and 345 mm in length, with a total product weight of 749 g. Constructed with a powder-coated steel mounting bracket and RoHS-compliant materials, it includes screwed mounting and conforms to VDMA24364 Zone III LABS with a corrosion resistance class of CRC 0. The unit operates within an ambient temperature range of 0 °C to 40 °C and can be stored in temperatures from -20 °C to 70 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8116850
Parallel gripper DHPC-25-A-S-1
The Festo part number 8116850 is a double-acting pneumatic parallel gripper featuring two jaws with a size of 25 and a 7 mm stroke per jaw. It utilizes a ball guide with zero angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and operating at pressures from 1 bar to 8 bar. Position sensing is accomplished via proximity switch, and the structural design incorporates a lateral connection direction and a positively driven motion sequence in any mounting position. Submit the exact part number, quantity, and application requirements for an official quote.
View product details →
Festo
8126918
Connecting cable NEBC-R3Z12G20-KH-15-N-SBS-RSG17-ET-S1
This Festo industrial component, part number 8126918, weighs 1900 g and operates within a DC voltage range of 0 V to 24 V with a nominal operating voltage of 24 V DC and a current rating of 11.7 A at 40° C. The field device side features a straight square plug and socket strip with RJ45 and a 12-pin, 2-row socket strip totaling 20 pins with 14 occupied pins, secured via a screw-type lock and supplied without a label holder. The control side utilizes a straight round hybrid plug with 17 pins and 14 occupied pins secured by a screwed mounting type. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
8120905
Filter regulator PCRP-44-G12-12-C-R1-M-T18
The Festo part number 8120905 is a Series P industrial component featuring a size 44 structural design as a filter regulator without a pressure gauge, incorporating a 5 µm filtration grade and a manual, rotating condensate drain with a maximum condensate volume of 12 cm³. This unit operates within a pressure range of 0.1 MPa to 2 MPa (1 bar to 20 bar) and a pressure regulation range of 0.5 bar to 12 bar, delivering a maximum standard flow rate of 2400 l/min and a normal nominal flow rate of 1600 l/min normalized to DIN 1343. Designed with primary pressure compensation, secondary exhausting, an actuator lock utilizing a regulating screw with a locknut, and a G1/4 pressure gauge setup, the housing and bowl conform to NACE MR0175/ISO 15156 standards while supporting compressed air per ISO 8573-1:2010 [-:4:-] or inert gases with oil lubrication compatibility. Certified for ATEX Zone 1, Zone 2, Zone 21, and Zone 22 with VDMA24364 Zone III LABS conformity, it must be mounted vertically within ±5° and operated in accordance with certificate information. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8118882
Guided drive DFM-32-25-P-A-GF-F1A
The Festo part number 8118882 is a double-acting industrial drive unit featuring a yoke structural design, a 32 mm piston diameter, and a 25 mm stroke. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar), this component utilizes a plain-bearing guide, elastic cushioning rings or pads at both ends, and allows position sensing via proximity switch with a maximum speed of 0.8 m/s. It exhibits a corrosion resistance class of CRC 0 with no corrosion stress, maintains ISO 14644-1 cleanroom suitability of Class 6, and is suitable for lithium-ion battery production with reduced Cu/Zn/Ni values under VDMA24364-B1/B2-L LABS conformity across an ambient temperature range of -20 °C to 80 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8116849
Parallel gripper DHPC-25-A-S
Engineered by Festo, part number 8116849 is a double-acting pneumatic parallel gripper featuring two jaws with a stroke of 7 mm per jaw, a ball guide, and a zero-backlash design that limits maximum gripper jaw angular play and backlash Sz to 0 mm. Operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi), this unit achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and a minimum opening time of 79 ms at 6 bar. Position sensing is accomplished via a proximity switch, and the component supports mounting in any position with a lateral connection direction and standard mounting type for gripper fingers. Submit the exact part number, quantity, and application requirements to request a formal quote for this item.
View product details →
Festo
8120904
Filter regulator PCRP-44-G12-12-E-R1-M-T18
The Festo industrial component, part number 8120904, is a size 44 Series P filter regulator featuring a structural design without a pressure gauge, a 40 µm filtration grade, and a manual rotating condensate drain with a max condensate volume of 12 cm³. It provides an operating pressure range of 0.1 MPa to 2 MPa (1 bar to 20 bar), a pressure regulation range of 0.5 bar to 12 bar, a maximum pressure hysteresis of 0.2 bar, and a maximum standard flow rate of 2500 l/min with primary pressure compensation and secondary exhausting. Constructed with housing and bowl conforming to NACE MR0175/ISO 15156, the unit supports compressed air per ISO 8573-1:2010 [-:4:-] or inert gases, permits vertical ±5° mounting, and carries ATEX Zone 1, 2, 21, and 22 explosion protection certifications alongside VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a formal quote for this component.
View product details →
Festo
8126917
Connecting cable NEBC-R3Z12G20-KH-10-N-SBS-RSG17-ET-S1
This industrial component from Festo features a product weight of 1300 g and operates within a DC voltage range of 0 V to 24 V at a nominal 24 V DC, with a current rating of 11.7 A at 40° C. The field device side includes a straight square plug and socket strip with RJ45 and socket strip connection technology, 20 total pins with 14 occupied, and a screw-type lock without a label holder. On the control side, electrical connection 2 utilizes a straight round hybrid plug with 17 pins, 14 occupied pins, and a screwed mounting type. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8118881
Guided drive DFM-32-20-P-A-GF-F1A
The Festo 8118881 is a double-acting industrial drive unit featuring a 32 mm piston diameter, a 20 mm stroke, and a yoke drive mode with a 50 mm distance from the payload center of gravity to the yoke plate. Designed with elastic cushioning rings at both ends, a plain-bearing guide structural design, and position sensing via proximity switch, this component operates within a pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) and a maximum speed of 0.8 m/s. It utilizes compressed air according to ISO 8573-1:2010 [7:4:4] as an operating medium, functions in ambient temperatures from -20 °C to 80 °C, and achieves ISO 14644-1 Class 6 cleanroom suitability with VDMA24364-B1/B2-L LABS conformity for Li-ion battery production. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Filtration Group
77686363
Filtration Group 77686363 — Filter Element
The Filtration Group manufacturer model FILTERELEMENT 852 362 SMX VST 25 / 77686363 is an industrial component featuring a Glasfaser filter element material and a filtration rating of 25 µm. This replacement part operates within a permissible differential pressure of 210 bar. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116848
Protective cap DHAS-DP-B23-20-L-N
The Festo 8116848 is a size 20 industrial component designed for a gripper with an 18 mm stroke and a product weight of 12.1 g. Featuring NBR protective cap material, this RoHS-compliant unit complies with VDMA24364-B2-L LABS conformity and is suitable for battery production with reduced Cu/Zn/Ni values (F1a) within an ambient temperature range of -10 °C to 60 °C. It utilizes a type of mounting that can be inserted in the slot from above. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8120903
Filter regulator PCRP-44-N14-12-C-R1-M-T18
The Festo 8120903 is a Series P size 44 filter regulator featuring a regulating screw with locknut, primary pressure compensation, and secondary exhausting for compressed air and inert gases within an operating pressure range of 1 bar to 20 bar. Designed with a 5 µm filtration grade, a manual rotating condensate drain with a 12 cm³ max condensate volume, and housing and bowl conforming to NACE MR0175/ISO 15156, it delivers a normal nominal flow rate of 1600 l/min and a max standard flow rate of 2400 l/min while supporting ATEX Zone 1, 2, 21, and 22 explosion protection. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8118875
Guided drive DFM-25-100-P-A-KF-F1A
The Festo 8118875 is a double-acting industrial drive unit featuring a yoke structural design with a 25 mm piston diameter, a 100 mm stroke, and a recirculating ball bearing guide. It operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of 0.15 MPa to 1 MPa (1.5 bar to 10 bar) at a maximum speed of 0.8 m/s, utilizing elastic cushioning rings or pads at both ends and position sensing via proximity switch. Certified for cleanroom applications to ISO Class 6 and suitable for Li-ion battery production with reduced Cu/Zn/Ni values, this component functions within an ambient temperature range of -5 °C to 60 °C and allows for optional oil lubrication. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
8116847
Protective cap DHAS-DP-B23-20-N
The Festo 8116847 is an industrial component designed for a gripper, featuring a size of 20 and a 10 mm stroke with a product weight of 10 g. This RoHS compliant part includes an NBR protective cap, exhibits VDMA24364-B2-L LABS conformity, and is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Operating within an ambient temperature range of -10 °C to 60 °C, the unit features a mounting type that can be inserted in the slot from above. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8126916
Connecting cable NEBC-R3Z12G20-KH-5-N-SBS-RSG17-ET-S1
Manufactured by Festo, this industrial component (Part Number: 8126916) weighs 680 g and operates within a DC voltage range of 0 V to 24 V with a nominal operating voltage of 24 V and a current rating of 11.7 A at 40° C. The field device side features a straight square plug and socket strip with RJ45 and socket strip connection technology, 20 pins (14 occupied), a screw-type lock, and no label holder, while the control side incorporates a straight round hybrid plug with 17 pins (14 occupied) and a screwed mounting type. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116846
Parallel gripper DHPC-L-20-A-NC-S-2
The Festo part number 8116846 is a pneumatic industrial component featuring a size 20 parallel gripper with two jaws and a 9 mm stroke per jaw. This single-acting, closed pneumatic gripper operates at pressures from 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar) with a ball guide, a repetition accuracy of 0.02 mm, and position sensing via a proximity switch. It achieves a max operating frequency of 3 Hz, a minimum opening time of 176 ms at 6 bar, and a minimum closing time of 50 ms at 6 bar, incorporating a gripping force backup during closing and a lateral structural design for flat mounting. Submit the exact part number, quantity, and application requirements for a formal price and lead time quote.
View product details →