Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8116791
Parallel gripper DHPC-16-A-NO-S
This Festo industrial component (Part Number: 8116791) is a pneumatic parallel gripper featuring two jaws, a size 16 rating, and a stroke of 3 mm per gripper jaw. The single-acting, open-mode device utilizes a ball guide and lever structural design with a positively driven motion sequence, lateral connection direction, and gripping force backup on opening. Operating within a pressure range of 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar, or 36.25 psi to 116 psi), it achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and position sensing via proximity switch. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8114685
Solenoid valve VSNC-F-P53U-M-G14-P2
The Festo 8114685 is a 5/3-way pressurized industrial component featuring an electrical actuation type, a 32 mm width, and a piston gate valve structural design with a soft sealing principle. Operating within a pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar), this piloted valve delivers a normal nominal flow rate of 950 l/min according to DIN 1343, utilizing an internal pilot air supply port and a NAMUR connection pattern conforming to the VDI/VDE 3845 standard. It incorporates a mechanical spring reset method, adjustable exhaust air function, positive overlap lap, non-reversible flow direction, and operates at an operating voltage via a solenoid coil ordered separately. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8118629
Guided drive DFM-12-80-P-A-GF-F1A
The Festo 8118629 is a double-acting industrial guide drive unit featuring a 12 mm piston diameter, an 80 mm stroke, and a yoke drive mode with a 25 mm distance of the center of gravity of the payload to the yoke plate. Engineered with a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch, it operates with compressed air as per ISO 8573-1:2010 [7:4:4] at pressures from 0.2 MPa to 1 MPa (2 bar to 10 bar) and a maximum speed of 0.8 m/s in any mounting position. The unit complies with VDMA24364-B1/B2-L LABS conformity with specific restrictions on copper, zinc, and nickel, achieves ISO 14644-1 Cleanroom Class 6, is suitable for Li-ion battery production with reduced Cu/Zn/Ni values (F1a), maintains a corrosion resistance class of CRC 0, and functions within an ambient temperature range of -20 °C to 80 °C with oil lubrication enabled. Submit your exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8112996
Push-in fitting NPQE-D-G38F-Q8-P5
The Festo 8112996 is a straight industrial component featuring a G3/8 internal thread for pneumatic connection 1 and an 8 mm outside diameter connection for pneumatic tubing 2, operating via a push-pull principle with a nominal width of 6 mm and an external hexagon SW21 mounting type. Constructed with a nickel-plated brass housing, a blue releasing ring, and a standard size with any mounting position, this pack of 5 supports compressed air according to ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.095 MPa to 0.8 MPa and ambient temperatures from -5 °C to 60 °C. The RoHS-compliant unit weighs 38.57 g, features a corrosion resistance class of 1, achieves ISO 14644-1 Class 4 cleanroom suitability, and allows lubricated operation while conforming to VDMA24364 Zone III LABS standards. Submit the exact part number, quantity, and application requirements to receive a quote for this component.
View product details →Filtration Group
77685118
Filtration Group 77685118 — Filter Element
The Filtration Group 77685118 is an industrial FILTERELEMENT 852 238 SMX 10NBR featuring a 10 µm filtration rating and glasfaser filter element material. This component operates at a permissible differential pressure of 20 bar and corresponds to manufacturer model 326369. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116790
Parallel gripper DHPC-16-A-B-2
The Festo part number 8116790 is a double-acting parallel pneumatic gripper featuring a size 16 design with two gripper jaws and a 3 mm stroke per jaw. It utilizes a ball guide and a lever structural design with positively driven motion sequence, offering zero gripper jaw angular play, zero backlash, and a repetition accuracy of 0.02 mm. Operating at a pressure range of 14.5 psi to 116 psi (1 bar to 8 bar), this unit achieves a maximum operating frequency of 3 Hz with a minimum opening time of 29 ms at 6 bar. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8114684
Solenoid valve VSNC-F-P53E-M-G14-P2
The Festo 8114684 is a 32 mm wide electrical-actuated 5/3 exhausted piston gate valve featuring a NAMUR connection pattern and VDI/VDE 3845 compliance. It delivers a normal nominal flow rate of 1050 l/min with an operating pressure range of 0.3 MPa to 0.8 MPa (3 bar to 8 bar) utilizing internal pilot air supply and a mechanical spring reset method. This piloted component incorporates a soft sealing principle, positive overlap lap, adjustable exhaust air function, and a C value of 4.4 l/sbar, operating via a separately ordered solenoid coil in any mounting position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118628
Guided drive DFM-12-50-P-A-GF-F1A
The Festo 8118628 is a double-acting industrial drive unit featuring a yoke structural design, a 12 mm piston diameter, and a 50 mm stroke with a plain-bearing guide. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a 0.2 MPa to 1 MPa pressure range, this component incorporates elastic cushioning rings at both ends and enables position sensing via proximity switch. It maintains a maximum speed of 0.8 m/s, functions in any mounting position across an ambient temperature range of -20 °C to 80 °C, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values alongside ISO 14644-1 cleanroom class 6 compliance. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8112995
Push-in fitting NPQE-D-G38F-Q6-P5
The Festo part number 8112995 is a standard industrial component featuring a straight design with a 4.5 mm nominal width, an internal thread G3/8 pneumatic connection 1, and a pneumatic connection 2 for a 6 mm outside diameter tubing utilizing the push-pull principle. Constructed with a nickel-plated brass housing and an external hexagon SW21 mounting type, this component operates within a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Each pack contains 5 units weighing 32.67 g each, featuring a blue releasing ring, RoHS compliance, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116789
Parallel gripper DHPC-16-A-B-1
This Festo industrial component (Part Number 8116789) is a double-acting pneumatic parallel gripper featuring two jaws, a ball guide, and a 3 mm stroke per gripper jaw. The structural design incorporates a connection direction underneath, lever actuation, side mounting for gripper fingers, and a positively driven motion sequence operating at a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar, or 14.5 psi to 116 psi). Technical parameters include a repetition accuracy of 0.02 mm, maximum interchangeability of 0.2 mm, rotational symmetry of 0.2 mm, zero gripper jaw angular play and backlash, a maximum operating frequency of 3 Hz, and a minimum opening time of 29 ms at 6 bar. Position sensing occurs via proximity switch, and the unit supports any mounting position with specific material restrictions excluding certain mass constituents of copper, zinc, or nickel. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8112994
Push-in fitting NPQE-D-G14F-Q12-P10
The Festo 8112994 is a straight industrial component featuring a G1/4 internal thread and a pneumatic connection for 12 mm outside diameter tubing, supplied in a pack size of 10 with a nickel-plated brass housing. It operates within a pressure range of -0.95 bar to 8 bar using compressed air according to ISO 8573-1:2010 [7:4:4] and accommodates any mounting position via an external hexagon SW21. Featuring a push-pull structural design with a blue releasing ring, this RoHS-compliant component achieves ISO 14644-1 cleanroom suitability class 4 and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
8118627
Guided drive DFM-12-40-P-A-GF-F1A
The Festo part number 8118627 is a double-acting industrial component featuring a 12 mm piston diameter, a 40 mm stroke, and a yoke drive unit operating mode with a 25 mm center of gravity distance from the payload to the yoke plate. This guide structural design incorporates a plain-bearing guide, elastic cushioning rings or pads at both ends, and position sensing via proximity switch for operation within an ambient temperature range of -20 °C to 80 °C and an operating pressure of 0.2 MPa to 1 MPa (2 bar to 10 bar). It operates at a maximum speed of 0.8 m/s using compressed air as per ISO 8573-1:2010 [7:4:4] with optional oil lubrication, and meets VDMA24364-B1/B2-L LABS conformity with reduced Cu/Zn/Ni values suitable for Li-ion battery production and ISO 14644-1 class 6 cleanroom suitability. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8114568
Solenoid valve VYKA-F7-M22U-12-D2-PF-5YQ7
The Festo 8114568 is a 7.5 mm wide, size 7 rocker valve featuring a diaphragm seal with soft sealing principle and direct electrical control. Media-contacting components consist of FFPM and PEEK materials, supporting both liquid and gaseous media through a 1.2 mm nominal width and reversible flow direction with restrictions. This 2/2 open, monostable valve utilizes a mechanical spring reset, connection diagram Q7 socket with two pins, and through-hole mounting for an M2 screw in any position, with food industry use detailed in supplementary documentation. Submit the exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
8116788
Parallel gripper DHPC-16-A-B
The Festo size 16 industrial component is a double-acting pneumatic parallel gripper featuring two jaws driven by a ball guide with a positively driven motion sequence and a stroke of 3 mm per jaw. Operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar / 14.5 psi to 116 psi), this unit achieves a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and a minimum opening time of 29 ms at 6 bar with position sensing via proximity switch. It accommodates any mounting position, excludes specific metals containing copper, zinc, or nickel by mass, and requires no gripping force backup while maintaining 0 mm jaw backlash Sz and 0 deg angular play. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8112993
Push-in fitting NPQE-D-G14F-Q10-P10
This Festo industrial component, part number 8112993, features a straight design with a nominal width of 8 mm and an internal thread G1/4 pneumatic connection 1 paired with a pneumatic connection 2 for 10 mm outside diameter tubing. Built with a nickel-plated brass housing, external hexagon SW17 mounting, and a blue releasing ring, it operates within a pressure range of -0.95 bar to 8 bar for compressed air compliant with ISO 8573-1:2010 [7:4:4]. The part supports any mounting position, allows lubricated operation, meets VDMA24364 Zone III LABS conformity, and achieves ISO 14644-1 Class 4 cleanroom suitability at a weight of 26.76 g in a pack size of 10. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118626
Guided drive DFM-12-30-P-A-GF-F1A
The Festo 8118626 is a double-acting industrial guide drive unit featuring a 12 mm piston diameter, a 30 mm stroke, and a yoke drive mode with a payload center of gravity distance of 25 mm to the yoke plate. This component utilizes elastic cushioning rings or pads at both ends, a plain-bearing guide, and position sensing via proximity switch, operating at pressures between 0.2 MPa and 1 MPa (2 bar to 10 bar) with a maximum speed of 0.8 m/s. It accommodates compressed air per ISO 8573-1:2010 [7:4:4] with optional oil lubrication, achieves ISO 14644-1 cleanroom class 6, complies with VDMA24364-B1/B2-L LABS conformity, and is suitable for Li-ion battery production with reduced Cu/Zn/Ni values while excluding specific metals by mass across an ambient temperature range of -20 °C to 80 °C in any mounting position. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
8116787
Parallel gripper DHPC-16-A-S-2
The Festo size 16 pneumatic parallel gripper features two gripper jaws operating on a double-acting system with a lever structural design, ball guide, and laterally connected positively driven motion sequence. This component provides a 3 mm stroke per gripper jaw, a repetition accuracy of 0.02 mm, zero gripper jaw angular play and backlash, and an operating pressure range of 1 bar to 8 bar. Position sensing is achieved via proximity switch, supporting a maximum operating frequency of 3 Hz and a minimum opening time of 29 ms at 6 bar with any mounting position. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Filtration Group
77685092
Filtration Group 77685092 — Industrial Component
The Filtration Group 77685092 (Manufacturer Model: FILTERELEMENT 852 238 MIC 25NBR / 77685092 | 326550) is an industrial component featuring a filtration rating of 25 µm and a permissible differential pressure of 20 bar. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8112992
Push-in fitting NPQE-D-G14F-Q8-P10
The Festo part number 8112992 is a standard straight industrial component featuring a push-pull structural design with a 6 mm nominal width and an external hexagon SW17 mounting type. Constructed with a nickel-plated brass housing and a blue releasing ring, this unit includes an internal thread G1/4 pneumatic connection 1 and accommodates a pneumatic tubing outside diameter of 8 mm for connection 2. It operates within a pressure range of -0.095 MPa to 0.8 MPa and an ambient temperature range of -5 °C to 60 °C using compressed air as per ISO 8573-1:2010 [7:4:4]. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
8118625
Guided drive DFM-12-25-P-A-GF-F1A
The Festo 8118625 is a double-acting industrial drive unit featuring a yoke structural design, a 12 mm piston diameter, and a 25 mm stroke with elastic cushioning rings or pads at both ends. Operating within a pressure range of 0.2 MPa to 1 MPa (2 bar to 10 bar) and utilizing a plain-bearing guide, this component achieves a maximum speed of 0.8 m/s while supporting compressed air media per ISO 8573-1:2010 [7:4:4] with optional oil lubrication. It is classified under CRC 0 corrosion resistance, complies with VDMA24364-B1/B2-L LABS conformity, meets ISO 14644-1 cleanroom Class 6 suitability, and restricts copper, zinc, and nickel constituents to maintain compatibility with Li-ion battery production under reduced Cu/Zn/Ni values (F1a). Submit the exact part number, quantity, and application requirements to receive an RFQ.
View product details →