Industrial sourcing catalog
Search by Manufacturer Part Number
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
8112986
Push-in fitting NPQE-D-G18F-Q4-P10
The Festo 8112986 is a standard straight industrial component featuring a 2.5 mm nominal width and a push-pull structural design utilizing a G1/8 internal thread for pneumatic connection 1 and an external hexagon SW14 mounting type. Nickel-plated brass housing construction supports an operating pressure range of -0.095 MPa to 0.8 MPa for compressed air media in accordance with ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. This pack of 10 components weighs 13.92 g each, includes a blue releasing ring, and conforms to VDMA24364 Zone III LABS requirements with ISO 14644-1 Class 4 cleanroom suitability. Submit part number 8112986, quantity, and application requirements to request a quote.
View product details →
Festo
8116781
Parallel gripper DHPC-L-10-A-NC-S-1
The Festo 8116781 is a pneumatic industrial component featuring a size 10 parallel gripper function with two gripper jaws and a 4 mm stroke per jaw. This single-acting, closed-mode device incorporates a ball guide with zero max gripper jaw angular play and zero backlash, achieving a repetition accuracy of 0.02 mm and an operating frequency up to 3 Hz within a pressure range of 3.5 bar to 8 bar. Position sensing is accomplished via proximity switch, and the unit supports any mounting position with a minimum opening time of 25 ms at 6 bar. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
8114532
Fluidic muscle DMSP-5-50N-RM-CM
The Festo part number 8114532 is a single-acting contracting diaphragm industrial component featuring a nominal length of 50 mm, a size 5 designation, and a stroke range from 0 mm to 12.5 mm. Operating at pressures up to 0.6 MPa (6 bar) with compressed air conforming to ISO 8573-1:2010 [7:-:-], this TÜV-certified unit delivers a maximum contraction of 20% of its nominal length with a 12 mm diameter expansion. It supports any mounting position, a maximum additional freely suspended load of 5 kg, and an ambient temperature range of -5 °C to 60 °C while maintaining a cyclic muscle repetition accuracy of 1% or less of the nominal length. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118456
Control system CMCB-D1-CC-S0
The Festo part number 8118456 is an industrial control cabinet component featuring dimensions of 220 mm x 350 mm x 440 mm, a nominal operating voltage of 230 V AC, and a mains frequency of 50 Hz to 60 Hz across TT, TN, and IT mains types. It operates with a max power supply of 6 A, max current consumption of 1.1 A, secondary circuit current consumption of 5 A, and internal electronic short-circuit fuse protection, all housed within an IP54-rated interior enclosure with a CRC 0 corrosion resistance class. This unit achieves Category B, performance level b, carries CE markings per EU EMC and low voltage directives, and complies with VDMA24364 Zone III LABS conformity for industrial purposes only. Please submit the exact part number, quantity, and application requirements to request a formal quotation.
View product details →
Festo
8112985
Push-in fitting NPQE-D-M5F-Q4-P10
This Festo industrial component, part number 8112985, features a mini straight design with a 2.5 mm nominal width, an M5 internal thread for pneumatic connection 1, and a connection for a 4 mm outside diameter pneumatic tubing at connection 2. Operating with compressed air as per ISO 8573-1:2010 [7:4:4] across a pressure range of -0.95 bar to 8 bar, the unit utilizes a push-pull structural design with a blue releasing ring and an external hexagon SW10 mounting type requiring a 0.8 Nm nominal tightening torque with a ±5% tolerance. It achieves ISO 14644-1 Class 4 cleanroom suitability, VDMA24364 Zone III LABS conformity, and a CRC 1 low corrosion stress rating while weighing 5 g and supporting an ambient temperature range of -5 °C to 60 °C in any mounting position. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →Filtration Group
77684640
Filtration Group 77684640 — Filter Element
The Filtration Group 77684640 industrial component is a FILTERELEMENT 852 149 SMX 10 featuring a 10 µm filtration rating and a Glasfaser filter element material. This model operates with a permissible differential pressure of 20 bar. Request a quote by submitting the exact part number, quantity, and application requirements.
View product details →
Festo
8116780
Parallel gripper DHPC-L-10-A-NC-S
This Festo industrial component (part number 8116780) is a single-acting, closed pneumatic parallel gripper featuring two jaws with a 4 mm stroke per jaw and a size 10 rating. Operating between 0.35 MPa and 0.8 MPa (3.5 bar to 8 bar / 50.75 psi to 116 psi), the unit achieves a repetition accuracy of 0.02 mm, a 0.2 mm maximum interchangeability, and a maximum operating frequency of 3 Hz with a minimum opening time of 25 ms at 6 bar. It utilizes a ball guide and lever structural design with a lateral connection direction, standard mounting for gripper fingers, and position sensing via a proximity switch while incorporating gripping force backup during closing. Submit the exact part number, quantity, and application requirements to request a quote for this item.
View product details →
Festo
8114530
Fluidic muscle DMSP-40-120N-RM-CM
The Festo part number 8114530 is a size 40 contracting diaphragm industrial component featuring a nominal length of 120 mm, a stroke of 0 mm to 30 mm, and a maximum contraction of 25 percent of the nominal length. Operating via a single-acting pulling mode with compressed air under ISO 8573-1:2010 [7:-:-] standards at pressures up to 0.6 MPa (6 bar), this TÜV-certified actuator accommodates a maximum additional freely suspended load of 250 kg and an ambient temperature range of -5 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8118455
Control system CMCB-D1-C-S1
The Festo part number 8118455 is an industrial component featuring a mounting plate and an integrated safety relay unit with a Category 3, performance level d rating. Operating at a nominal AC voltage of 230 V and a mains frequency of 50 Hz to 60 Hz across TT, TN, or IT mains types, it includes an internal electronic fuse providing short-circuit protection alongside a max current consumption of 1.1 A, secondary circuit current of 5 A, and max power supply of 6 A within dimensions of 135 mm by 254 mm by 375 mm. Built for interior use with an IP20 degree of protection, 0 - No corrosion stress CRC, and VDMA24364 Zone III LABS conformity, the unit carries CE marking per EU EMC and low voltage directives while restricting application to industrial environments where radio interference suppression may be required in residential areas. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8112984
Push-in fitting NPQE-D-M5F-Q3-P10
This Festo mini industrial component, part number 8112984, features a straight design with a 2.2 mm nominal width and an internal thread M5 pneumatic connection 1 paired with pneumatic connection 2 for a 3 mm outside diameter tubing. Operating within a pressure range of -0.095 MPa to 0.8 MPa and temperatures from -5 °C to 60 °C, the unit utilizes a push-pull structural design and an external hexagon AF 8 mounting type with a 0.8 Nm nominal tightening torque. Delivered in a pack size of 10 with a product weight of 3.56 g each, the hardware accommodates compressed air per ISO 8573-1:2010 [7:4:4] with lubricated operation possible. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8114136
Solenoid coil VACC-S13-11-K4-1-KS4A
The Festo part number 8114136 is an electrical industrial component featuring a 100% duty cycle, a required current consumption of 16 mA, and coil characteristics ranging from 14 to 32 V DC at 0.22 to 1.1 W. Designed for any mounting position with insulation class H, this unit handles a maximum input voltage Vi of 32 V, max input power Pi of 1.2 W, and max input current Ii of 0.2 A while tolerating voltage fluctuations of -15% and +10%. It carries CE markings conforming to the EU EMC and explosion protection directives, alongside ATEX and KR explosion protection certifications for Gas Zone 1 and Dust Zone 21 environments with Ex ia IIC T5 and T6 ignition protection. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8118454
Control system CMCB-D1-CC-S1
The Festo 8118454 is an industrial control cabinet featuring an integrated safety relay unit rated for Category 3, performance level d, with dimensions of 220 mm x 350 mm x 440 mm and an IP54 degree of protection for interior ambient conditions. It operates on a nominal AC voltage of 230 V at 50 Hz to 60 Hz across TT, TN, and IT mains types, consuming a maximum of 1.1 A with an internal electronic fuse providing short-circuit protection. This component conforms to the EU EMC and low voltage directives, exhibits a corrosion resistance class of CRC 0, and requires radio interference suppression measures when deployed in residential areas. Submit the exact part number, quantity, and application requirements to receive a formal quotation for this unit.
View product details →
Festo
8116779
Parallel gripper DHPC-L-10-A-NO-S-2
This Festo industrial component (Part Number 8116779) is a pneumatic parallel gripper featuring two gripper jaws, a size 10 designation, and a stroke of 4 mm per jaw with single-acting, open mode of operation. The unit operates within a pressure range of 0.35 MPa to 0.8 MPa (3.5 bar to 8 bar, 50.75 psi to 116 psi) and achieves a repetition accuracy of 0.02 mm alongside a gripping force backup on opening. Built with a ball guide, lever structural design, lateral connection direction, flat mounting type for gripper fingers, and positively driven motion sequence, it supports any mounting position and offers position sensing via a proximity switch. Submit the exact part number, quantity, and application requirements to request a formal quote.
View product details →
Festo
8112978
Push-in fitting NPQE-DK-G14-Q12-P10
The Festo 8112978 is a straight industrial component featuring a G1/4 external thread for pneumatic connection 1 and a 12 mm outside diameter tubing connection for pneumatic connection 2, operating via a push-pull structural design with a nominal width of 7 mm. This standard-sized part operates at pressures ranging from -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, -13.775 psi to 116 psi) with compressed air as per ISO 8573-1:2010 [7:4:4] across an ambient temperature range of -5 °C to 60 °C. Supplied in a pack size of 10 with a product weight of 26.8 g each, the unit utilizes an internal hexagon AF 7 mounting type requiring a nominal tightening torque of 9 Nm with a ±20% tolerance. Submit part number 8112978, quantity, and application requirements for a quote.
View product details →
Festo
8114135
Solenoid coil VACC-S13-11-K4-1-NE4A
The Festo part number 8114135 is an electrical industrial component featuring a 100% duty cycle, 16 mA required current consumption, and an insulation class of H. It operates with a maximum input power of 1.2 W, a maximum input voltage of 32 V, a maximum input current of 0.2 A, and permissible voltage fluctuations of -15% / +10% with coil characteristics ranging from 14 to 32 V DC at 0.22 to 1.1 W. Certified for explosive atmospheres with EPL Db and Gb ratings for Zone 1 and Zone 21 under certificate GYJ20.1094X, this unit has effective internal capacitance of 0 µF, effective internal inductance of 0 mH, and VDMA24364 Zone III LABS conformity. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
8112977
Push-in fitting NPQE-DK-G14-Q10-P10
The Festo part number 8112977 is a straight industrial component featuring a 7 mm nominal width, an external thread G1/4 pneumatic connection 1, and a pneumatic connection 2 for a 10 mm outside diameter tubing utilizing a push-pull structural design. This component operates with compressed air as per ISO 8573-1:2010 [7:4:4] across an operating pressure range of -0.095 MPa to 0.8 MPa (-0.95 bar to 8 bar, or -13.775 psi to 116 psi) within an ambient temperature of -5 °C to 60 °C, and incorporates a sealing ring on the screwed plug with a nominal tightening torque of 9 Nm at a ±20% tolerance. Each pack size contains 10 units, weighing 19.5 g each, classified under corrosion resistance class 1, VDMA24364 Zone III LABS conformity, and ISO 14644-1 Class 4 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
8118347
Pilot valve MGXIAH-3/2-H-T-0.8-24DC-EX
The Festo 8118347 is a 3/2-way closed, monostable electrical industrial component featuring a mechanical spring reset and non-reversible flow direction. Designed as an on/off valve with a non-detenting manual override, it operates within a pressure range of -0.09 MPa to 0.8 MPa and supports a 100% duty cycle with IP65 protection. Certified for explosive atmospheres with ATEX, IEC-Ex, and CN approvals, it carries gas and dust ignition protection ratings alongside specified maximum input parameters of 31 V and insulation class H. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
8116778
Parallel gripper DHPC-L-10-A-NO-S-1
The Festo part number 8116778 is a size 10 pneumatic industrial component featuring two parallel gripper jaws with a ball guide and a stroke of 4 mm per jaw. This single-acting, open-mode lever gripper operates at pressures ranging from 0.35 MPa to 0.8 MPa (3.5 bar to 8 bar or 50.75 psi to 116 psi) with a repetition accuracy of 0.02 mm, a maximum operating frequency of 3 Hz, and a minimum opening time of 22 ms at 6 bar. Position sensing is achieved via proximity switch, supporting any mounting position with zero gripper jaw backlash and zero angular play. Submit your exact part number, quantity, and application requirements to request a formal quotation.
View product details →
Festo
8114078
Solenoid coil VACC-S13-11-K4-1-NM4A
Engineered for electrical actuation with any mounting position, this Festo industrial component operates on a 100% duty cycle with a required current consumption of 16 mA and maximum input power of 1.2 W. It features Class H insulation, supports 14 to 32 V DC coil characteristics, and holds explosion protection certification under DNV 17.0043X for Zone 1 and Zone 21 explosive environments. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →Filtration Group
77684715
Filtration Group 77684715 — Filter Element
The Filtration Group part number 77684715, also designated as manufacturer model FILTERELEMENT 852 149 PS VST 25 / 77684715 | 285727, is an industrial component featuring a Glasfaser filter element material. This filter element provides a filtration rating of 25 µm and supports a permissible differential pressure of 210 bar. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →