Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo part number 543982 is a double-acting industrial component featuring a 16 mm piston diameter, a 150 mm stroke, and a yoke drive unit operating mode incorporating a piston, piston rod, and slide. This unit is equipped with a ball bearing cage guide, progressive pneumatic shock absorbers at both ends, and an adjustable end-position range spanning 87 mm at the front and 25.5 mm at the rear, supporting an operating pressure of 1 bar to 8 bar with a repetition accuracy of plus or minus 0.01 mm. Position sensing is achieved via a proximity switch, while operation functions within an ambient temperature range of 0 degrees Celsius to 60 degrees Celsius using compressed air compliant with ISO 8573-1:2010 [7:4:4] at a maximum speed of 0.8 m/s. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 546149 is an electrical, servo-controlled diaphragm valve featuring a soft sealing principle and a 2/2-way, closed, monostable valve function with a 27.5 mm nominal width. Configured for in-line installation with a G3/4 fitting connection and a preferred upright mounting position, this component accommodates compressed air, inert gas, water, and neutral liquids through a non-reversible flow direction. It operates within a gaseous media pressure range of 0.05 MPa to 1 MPa and a liquid media pressure range of 0.05 MPa to 0.6 MPa, supported by a 0.5 bar differential pressure and 4 MPa burst pressure. Solenoid coil type MD-... is required for electrical connection and must be ordered as an accessory. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 546430 is a mini series D directly controlled diaphragm regulator featuring a rotary knob with detent for actuator locking and a constant output function with primary pressure compensation and secondary exhausting. Designed with a normal nominal flow rate of 126 cfm, it operates within a pressure range of 1 bar to 16 bar and regulates output pressure between 0.5 bar and 12 bar using compressed air or inert gases. Weighing 10.5 oz with a moderate corrosion resistance class of 2, this component supports front panel mounting, in-line installation, or accessory mounting across a temperature range of 14 °F to 140 °F. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo part number 543981 is a double-acting industrial drive unit featuring a 16 mm piston diameter, a 100 mm stroke, and a yoke structural design incorporating a piston, piston rod, and slide. Operating within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar) and a maximum speed of 0.8 m/s, this component utilizes progressive pneumatic shock absorbers at both ends, a ball bearing cage guide, and adjustable end-position ranges of 68 mm at the front and 25.5 mm at the rear. Position sensing is achieved via proximity switch, operating on compressed air according to ISO 8573-1:2010 [7:4:4] within an ambient temperature range of 0 °C to 60 °C. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 546148 is a servo-controlled diaphragm valve featuring a soft sealing principle, a 13.5 mm nominal width, and a 2/2-way, closed, monostable valve function with electrical actuation. Designed for in-line installation with a G1/2 fitting connection and a preferred upright mounting position, it regulates compressed air, inert gas, water, and neutral liquids within defined pressure and differential pressure limits. Solenoid coils of type MD-... are required as separately ordered accessories to operate the non-reversible flow direction. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 546429 is a mini D-series industrial component featuring a sinter filter with a centrifugal separator and a fully automatic condensate drain housed in a metal bowl guard. Operating within a pressure range of 0.2 MPa to 1.2 MPa (2 bar to 12 bar, 29 psi to 174 psi) and a standard nominal flow rate of 157 cfm, this unit provides a 40 µm filtration grade with a 75 percent degree of condensate separation for compressed air and inert gas. It supports line installation or mounting with accessories at a vertical position within plus or minus 5 degrees, exhibiting a CRC 2 moderate corrosion stress rating and a product weight of 8.75 oz. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 543980 is a double-acting industrial component featuring a 16 mm piston diameter, an 80 mm stroke, and a yoke drive unit with a structural design incorporating a piston, piston rod, and slide. Equipped with a ball bearing cage guide, progressive pneumatic shock absorbers at both ends, and a repetition accuracy of ±0.01 mm, this unit operates at pressures from 0.1 MPa to 0.8 MPa and a maximum speed of 0.8 m/s with compressed air in accordance with ISO 8573-1:2010 [7:4:4]. It includes position sensing via proximity switch, offers an adjustable end-position range of 68 mm at the front and 25.5 mm at the rear, and is rated for ambient temperatures between 0 °C and 60 °C with ISO Class 7 cleanroom suitability. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 546147 is a servo-controlled diaphragm valve featuring a 2/2-way, closed, monostable valve function with a 13.5 mm nominal width and a soft sealing principle. This electrically actuated component utilizes in-line installation with a G3/8 fitting connection, a non-reversible flow direction, and supports an upright mounting position alongside solenoid coil type MD-... available as an accessory. It processes compressed air as per ISO 8573-1:2010 [7:4:4], inert gas, water, and neutral liquids, handling gaseous media pressures from 0.05 MPa to 1 MPa and liquid media pressures from 0.05 MPa to 0.6 MPa with a 0.5 bar differential pressure. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 546428 is a mini Series D industrial component featuring a sinter filter with a centrifugal separator, a metal bowl guard, and a manual rotating condensate drain. It delivers a normal nominal flow rate of 157 cfm across an operating pressure range of 0 MPa to 1.6 MPa (0 bar to 16 bar, 0 psi to 232 psi) while achieving a 75 percent degree of condensate separation with a 40 µm grade of filtration. Designed for compressed air per ISO 8573-1:2010 [-:9:-] or inert gases, this unit operates within a temperature range of 14 °F to 140 °F, features a corrosion resistance class of CRC 2, and weighs 8.75 oz for vertical in-line or accessory mounting. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 543979 is a double-acting industrial drive unit featuring a 16 mm piston diameter, a 50 mm stroke, and a yoke structural design incorporating a piston, piston rod, and slide. It operates within a pressure range of 0.1 MPa to 0.8 MPa utilizing compressed air conforming to ISO 8573-1:2010 [7:4:4] at speeds up to 0.8 m/s, supported by progressive pneumatic shock absorbers at both ends, a ball bearing cage guide, and a repetition accuracy of ±0.01 mm. Position sensing is achieved via a proximity switch, while the adjustable end-position range measures 29 mm at the front length and 25.5 mm at the rear length. Submit part number 543979, quantity, and application requirements to receive an official quote.
View product details →
Festo
The Festo 546146 is a servo-controlled diaphragm valve featuring a 2/2-way, closed, monostable valve function with a soft sealing principle and a 13.5 mm nominal width. Designed for in-line installation with a G1/4 fitting connection and an upright preferred mounting position, this electrically actuated component accepts media including compressed air, inert gas, water, and neutral liquids. Gaseous media operate at pressures from 0.05 to 1 MPa, while liquid media function within a 0.05 to 0.6 MPa range, supported by a differential pressure of 0.5 bar and an overload pressure of 4 MPa. Please submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 546427 is a Midi-sized proportional standard oil mist lubricator from the D series, featuring a metal bowl guard and a maximum oil capacity of 3.7 US oz. Designed for vertical mounting within a ±5° tolerance, this industrial component operates within a pressure range of 0 MPa to 1.6 MPa (0 bar to 16 bar, 0 psi to 232 psi) and handles compressed air according to ISO 8573-1:2010 [7:4:4] or inert gases. It delivers a normal nominal flow rate of 864 cfm with a minimum flow rate for lubricator function of 1.26 cfm, maintaining a moderate corrosion resistance class (CRC 2) and a product weight of 22.1 oz. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
Engineered with a 16 mm piston diameter and a 40 mm stroke, this Festo 543978 double-acting industrial component features a yoke drive unit, piston, piston rod, and slide with a ball bearing cage guide. The unit operates within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar) using compressed air as per ISO 8573-1:2010 [7:4:4], achieving a maximum speed of 0.8 m/s and a repetition accuracy of ±0.01 mm. Progressive pneumatic shock absorbers provide cushioning at both ends, while position sensing is handled via proximity switch across an adjustable end-position range of 29 mm at the front length and 25.5 mm at the rear length. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
Manufactured by Festo, this industrial component (Part Number 546104) features a width of 42 mm and is built on the ISO 5599-2 norm with a die-cast aluminum sub-base for through-hole mounting in any position. It operates on a 24 V DC operating voltage range with internal pilot air supply, handling an operating pressure from -0.09 MPa to 1 MPa using compressed air per ISO 8573-1:2010 [7:4:4] where oil lubrication operation is possible and required for further use. Weighing 386 g, the unit achieves an IP65 and NEMA 4 degree of protection in the mounted state, functioning within an ambient temperature range of -5 °C to 50 °C. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 546425 is a Midi size Series D filter regulator featuring a structural design without a pressure gauge, a rotary knob with detent for actuator locking, and a manual rotating condensate drain. It delivers a normal nominal flow rate of 487 cfm across an operating pressure range of 1 bar to 16 bar with a 40 µm grade of filtration and a pressure regulation range of 0.5 bar to 12 bar. Built with a metal bowl guard and rated for a corrosion resistance class of 2, this unit operates on compressed air per ISO 8573-1:2010 [-:9:-] or inert gases with a vertical ±5° mounting position. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 543977 is a double-acting industrial component featuring a 16 mm piston diameter, a 30 mm stroke, and a yoke drive unit operating mode with a piston, piston rod, and slide structural design. It incorporates progressive pneumatic shock absorbers at both ends, an adjustable end-position range of 29 mm at the front and 25.5 mm at the rear, a ball bearing cage guide, and position sensing via proximity switch. Operating at 1 bar to 8 bar with compressed air conforming to ISO 8573-1:2010 [7:4:4] at a maximum speed of 0.8 m/s, it delivers a repetition accuracy of ±0.01 mm across any mounting position within an ambient temperature range of 0 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo part number 546103 is an industrial component featuring a width of 42 mm and built to ISO 5599-2 norms for any mounting position. It operates within a pressure range of -0.9 bar to 10 bar using compressed air as per ISO 8573-1:2010 [7:4:4] with internal pilot air supply, supporting 110 V AC and 24 V DC operating voltages alongside a 2 A current rating at 40° C. The unit weighs 364 g, offers IP65 and NEMA 4 protection when mounted, and incorporates through-hole mounting with RoHS compliant materials. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo 546424 is a Midi size D-series industrial component featuring a directly controlled diaphragm regulator with a rotary knob with detent actuator lock and primary pressure compensation. Operating at up to 16 bar with a 0.5 bar to 12 bar pressure regulation range and a normal nominal flow rate of 503 cfm, this device accommodates compressed air and inert gases within a temperature range of 14 °F to 140 °F. It offers front panel mounting, in-line installation, or accessory mounting options with a moderate corrosion stress rating and a product weight of 23.1 oz. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 543976 is a double-acting industrial component featuring a 16 mm piston diameter, a 150 mm stroke, and a yoke drive unit operating mode with an integrated ball bearing cage guide. It incorporates elastic cushioning rings and pads with a fixed stop at both ends, a front adjustable end-position range of 87 mm, a rear adjustable end-position range of 25.5 mm, and position sensing via a proximity switch. Operating on compressed air according to ISO 8573-1:2010 [7:4:4] within a pressure range of 0.1 MPa to 0.8 MPa (1 bar to 8 bar), this unit achieves a maximum speed of 0.8 m/s and a repetition accuracy of ±0.01 mm across an ambient temperature range of 0 °C to 60 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 546102 is an industrial component measuring 42 mm in width, designed with through-hole mounting for any position and built to the ISO 5599-2 norm with a product weight of 364 g. Operating within a pressure range of -0.09 MPa to 1 MPa (-0.9 bar to 10 bar) and a temperature range of -5 °C to 50 °C, this unit functions with compressed air as per ISO 8573-1:2010 [7:4:4] and internal pilot air supply, allowing oil-lubricated operation. Electrical characteristics include an operating voltage of 110 V AC, 24 V DC operating voltage range, 4 kV surge resistance, and a 2 A current rating at 40° C, complemented by IP65 and NEMA 4 protection in the mounted state with CE marking as per the EU low voltage directive. Submit the exact part number, quantity, and application requirements for a quote.
View product details →