Industrial sourcing catalog
Browse verified product records and request commercial availability, lead time and technical documentation.
Festo
The Festo 153273 is a standard, L-shaped industrial component featuring a 2.8 mm nominal width, a 14.9 mm tubing insertion depth, and an external hexagon SW14 mounting type that permits installation in any position. Operating via the push-pull structural design principle, this unit handles compressed air and liquid water across a temperature range of -10 °C to 80 °C with a nominal tightening torque of 7 Nm (±20%). Weighing 14 g and packaged in a quantity of 10, the part offers Class 4 cleanroom suitability according to ISO 14644-1 and a low corrosion stress CRC rating of 1. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 154451 is a double-acting industrial component featuring a rack and pinion design structure with a size 16 and a nominal 90-degree swivel angle. Operating within a working pressure range of 2.5 to 10 bar, this unit delivers a theoretical torque of 0.5 Nm at 6 bar and includes adjustable pneumatic cushioning (PPVJ) with a 72.2-degree cushioning angle. Constructed with a case-hardened steel drive shaft and TPE-U(PU) and NBR seals, the 530 g assembly supports proximity sensor position detection and operates on compressed air meeting ISO8573-1:2010 [7:-:-] standards across an ambient temperature range of -10 to 60 °C. Submit the exact part number, quantity, and application requirements to request a formal quote for this Festo component.
View product details →
Festo
The Festo 156081 is a double-acting industrial component featuring a 16 mm piston diameter, an adjustable stroke from 1 to 200 mm, and a male thread piston-rod end with a through piston rod design. Configured with flexible cushioning rings at both ends, position detection for proximity sensors, and heat-resistant seals supporting temperatures up to 120°C, this unit operates within a pressure range of 0.13 to 1 MPa (1.3 to 10 bar) using compressed air conforming to ISO 8573-1:2010 [7:4:4]. It delivers a theoretical force of 90 N in both advancing and retracting directions at 0.6 MPa, maintains a CRC 2 moderate corrosion resistance rating, and permits any assembly position. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo part number 153672 is a standard industrial component featuring a nominal size of 3.6 mm and a push/pull design structure with a coated screw-in stud seal. Operating within a working pressure range of -0.95 to 10 bar and an ambient temperature range of -10 to 60 °C, this unit utilizes an NPT1/4-18 pneumatic connection for 1/4" outside diameter tubing and includes a grey release ring, PBT housing, POM release ring, NBR tubing seal, and high alloy non-corrosive steel hose clamping segment. Built with RoHS-conforming materials and Germanischer Lloyd authorization, it supports filtered compressed air or vacuum media in any assembly position with a maximum tightening torque of 14 Nm. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 154434 is a mini straight industrial component featuring a 4 mm nominal width, a 12 mm tubing insertion depth, and a push-pull structural design utilizing a sealing ring on the screwed plug. This part accommodates compressed air per ISO 8573-1:2010 [7:-:-] across an ambient temperature range of -10 °C to 80 °C, supporting an operating pressure from -0.095 MPa to 0.6 MPa and a temperature-dependent operating pressure up to 1.4 MPa. Each pack contains 10 units, weighing 4.7 g each, designed with 1 outlet, 1 supply line, a corrosion resistance class of 1, and a nominal tightening torque of 1.5 Nm with a ±20% tolerance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 153272 is a standard blanking plug featuring a Ø 16 mm push-in sleeve pneumatic connection and a robust PBT housing. It supports compressed air and liquid water operating media across an ambient temperature range of -10 °C to 80 °C with a product weight of 4 g. This RoHS compliant component achieves a CRC rating of 1 for low corrosion stress and accommodates lubricated operation. Submit your exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 156080 is a double-acting industrial component featuring a 12 mm piston diameter, an adjustable stroke from 1 to 200 mm, and a male thread piston-rod end configured with a through piston rod and heat-resistant seals rated up to 120 °C. Operating on compressed air per ISO 8573-1:2010 [7:4:4] within a pressure range of 0.15 to 1 MPa (1.5 to 10 bar / 21.75 to 145 psi), the unit delivers a theoretical force of 51 N on both advance and retraction strokes at 0.6 MPa (6 bar, 87 psi). It incorporates flexible cushioning rings at both ends, position detection capabilities for proximity sensors, and a moderate corrosion resistance classification of CRC 2 with an ambient temperature range of 0 to 120 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 153671 is a standard industrial component featuring a 3.6 mm nominal size, NPT1/8-27 pneumatic connection, and a 1/4" outside diameter tubing port utilizing the push/pull principle with a grey release ring. Constructed with a PBT housing, POM release ring, NBR tubing seal, and a non-corrosive high alloy steel hose clamping segment, this part operates within a pressure range of -0.95 to 10 bar and an ambient temperature of -10 to 60 °C using filtered compressed air or vacuum. It includes a coated screw-in stud with a maximum tightening torque of 8 Nm, Germanischer Lloyd authorization, and RoHS conformance while maintaining a CRC 1 corrosion resistance classification for assembly in any position. Submit the exact part number, quantity, and application requirements to request a quote for this component.
View product details →
Festo
The Festo 153271 is a standard blanking plug featuring a 12 mm push-in sleeve pneumatic connection and a robust PBT housing with a product weight of 2.5 g. It supports operating pressures from -0.95 bar to 6 bar across its entire temperature range, handles compressed air and liquid water media, and permits lubricated operation within an ambient temperature range of -10 °C to 80 °C. Featuring a CRC 1 low corrosion stress rating and RoHS compliant materials, this component is mounted in any position. Submit your exact part number, quantity, and application requirements for a formal quote.
View product details →
Festo
The Festo 1544198 industrial component is designed for CC-LINK® communication and features a durable PA housing measuring 40 mm in width, 91 mm in length, and 50 mm in height with a product weight of 90 g. It supports mounting on an electrical interface or electrical sub-base, achieving an IP65 and IP67 degree of protection when mounted and unused connections are sealed within an ambient temperature range of 0 °C to 50 °C. The unit includes specific LED displays for operating voltage, module system status, data transmission errors, and bus activity, alongside comprehensive diagnostics for communication errors, system diagnostics, and undervoltage. Please submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 15608 is a 5-digit mechanical sequence counter featuring a pneumatic actuator designed for front panel mounting with an M5 pneumatic connection. This industrial component operates within a pressure range of 2 bar to 8 bar, utilizing compressed air as per ISO 8573-1:2010 [7:4:4] without oil lubrication, and incorporates ATEX certification for hazardous Zones 1, 2, 21, and 22. Resetting is achieved via a manual key or pneumatic signal, requiring a minimum resetting pressure of 2 bar and a minimum pulse length of 180 ms. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 153670 is a standard industrial component featuring a 3.6 mm nominal size and a push/pull design structure with a grey release ring. Operating with filtered compressed air or vacuum at pressures ranging from -0.95 to 10 bar and temperatures between -10 and 60 °C, it includes an NPT1/4-18 pneumatic connection for 3/16" outside diameter tubing sealed with NBR and a screw-in stud coated for secure assembly. Constructed with a PBT housing, POM release ring, and high alloy non-corrosive steel hose clamping segment, this RoHS-compliant part achieves a CRC 1 corrosion resistance classification and Germanischer Lloyd authorization. Submit the exact part number, quantity, and application requirements to receive a formal quote.
View product details →
Festo
This Festo 153270 blanking plug features a standard size with a 10 mm push-in sleeve pneumatic connection and any mounting position. Constructed from PBT housing material with a product weight of 2 g, it supports compressed air and liquid water operating media across an ambient temperature range of -10 °C to 80 °C. The component operates at pressures from -0.95 bar to 6 bar across its entire temperature range, and up to 14 bar under temperature-dependent conditions, with CRC 1 corrosion resistance and RoHS compliance. Submit the exact part number, quantity, and application requirements to request a quote.
View product details →
Festo
The Festo 156079 is a double-acting industrial component featuring a 100 mm piston diameter and an adjustable stroke ranging from 1 to 400 mm with a male thread piston-rod end. Operating on compressed air in accordance with ISO8573-1:2010 [7:4:4] within a pressure range of 0.08 to 1 MPa (11.6 to 145 psi), this unit delivers a theoretical force of 4,418 N on both advance and retraction strokes at 0.6 MPa. It is constructed with flexible cushioning rings or plates at both ends, position detection capabilities for proximity sensors, and heat-resistant seals supporting ambient temperatures up to 120 °C. Submit the exact part number, quantity, and application requirements to receive a formal quotation.
View product details →
Festo
The Festo 1543240 is an industrial component featuring a size 110 design with a 1:1 gear ratio and a transferable torque of 25 Nm. This unit operates up to a maximum rotational speed of 5000 rpm, exhibits a mass moment of inertia of 799 kgmm², and incorporates D60B actuator and 60G motor input interface codes with a product weight of 5250 g. Built with RoHS-compliant materials and VDMA24364 Zone III LABS conformity, it provides an IP40 degree of protection and functions within an ambient temperature range of -10 °C to 60 °C in any mounting position. Submit the exact part number, quantity, and application requirements for a quote.
View product details →
Festo
The Festo part number 153669 is an industrial component featuring a standard size with a 3.6 mm nominal size and a push/pull design structure utilizing a coating type of seal on the screw-in stud. It operates with filtered compressed air or vacuum across a working pressure and temperature-dependent working pressure of -0.95 to 10 bar, an ambient temperature range of -10 to 60 °C, and a maximum tightening torque of 8 Nm in any assembly position. Constructed with a PBT housing, POM grey release ring, NBR tubing seal, and high alloy non-corrosive steel hose clamping segment, the unit includes NPT1/8-27 and 3/16" outside diameter tubing pneumatic connections, CRC 1 corrosion resistance, Germanischer Lloyd authorization, and RoHS compliance. Submit the exact part number, quantity, and application requirements for an RFQ quote.
View product details →
Festo
The Festo 153269 is a standard blanking plug featuring a PBT housing with an 8 mm push-in sleeve pneumatic connection 1 and a product weight of 1 g. This component supports any mounting position, operates within an ambient temperature range of -10 °C to 80 °C, and provides an operating pressure of -0.095 MPa to 0.6 MPa across its full temperature range. Compliant with RoHS standards and featuring a corrosion resistance class of 1, it accommodates compressed air as per ISO 8573-1:2010 [7:-:-] and liquid water with lubricated operation. Submit part number 153269 along with your required quantity and application parameters to request a quote.
View product details →
Festo
The Festo 156078 is a double-acting industrial component featuring an 80 mm piston diameter, an adjustable stroke ranging from 1 to 400 mm, and a male thread piston-rod end with a piston and piston rod design structure. It operates within a pressure range of 0.08 to 1 MPa (0.8 to 10 bar or 11.6 to 145 psi), delivering a theoretical retracting and advancing force of 2,827 N at 0.6 MPa (6 bar, 87 psi) using compressed air conforming to ISO8573-1:2010 [7:4:4]. Built with flexible cushioning rings or plates at both ends, position detection capabilities for proximity sensors, and an ambient temperature range of 0 to 120 °C, this unit supports variants with a through, hollow piston rod or heat-resistant seals up to 120°C. Submit the exact part number, quantity, and application requirements to receive a quote.
View product details →
Festo
The Festo 1542264 is an industrial component featuring a size of 110, a 1:1 gear ratio, and a transferable torque of 25 Nm with a 0.3 Nm no-load driving torque. This RoHS compliant unit supports any mounting position, accommodates a maximum rotational speed of 5000 rpm, and integrates an actuator interface code D60B alongside a motor input interface code of 60H. Weighing 5240 g with a mass moment of inertia of 799 kgmm², the device offers IP40 protection, VDMA24364 Zone III LABS conformity, and operates in ambient temperatures from -10 °C to 60 °C while withstanding storage temperatures between -25 °C and 60 °C and 0 to 95% relative air humidity. Submit the exact part number, quantity, and application requirements to request a quote for this Festo component.
View product details →
Festo
The Festo 153668 is a standard industrial component featuring a nominal size of 2.3 mm, a push/pull design structure, and a grey release ring. It operates with filtered compressed air or vacuum at working pressures from -0.95 to 10 bar across ambient temperatures of -10 to 60 °C, utilizing an NPT1/8-27 pneumatic connection for 5/32" outside diameter tubing with a coating seal on the screw-in stud. Constructed with a PBT housing, POM release ring, NBR tubing seal, and high alloy steel non-corrosive hose clamping segment, this RoHS-compliant part achieves Germanischer Lloyd authorization with a maximum tightening torque of 8 Nm and CRC 1 corrosion resistance. Submit the exact part number, quantity, and application requirements for a quote.
View product details →